2885 scsi sata confilct

Sorry for my english but i'm a french man

On K8W, i have a similar problem :

I have a sata disk to boot and a 29160 with 5 disk for data and i have no
problem only if sata is on raid mode.

Sata in normal mode, i can't boot on sata with 29160 installed. I hope than
help you.

After upgrade bios from 1.01 and 1.02, computer don't boot. I have reinstall
os and now no problem.



"dan list" <danlist_spamification RemoveThis @insightbb.com> a écrit dans le message de
news:YWH2c.198515$uV3.798676@attbi_s51...
 > dan list wrote:
  > > Hey I've got a 39160 SCSI card with the 3.1 bios on a thunder k8w with
bios 1.02
  > > and if I enable the sata chip the scsi bios malfunctions with "scsi
controller
  > > configuration error ff" and "eeprom failure using defaults" messages. Is
there
  > > some magic I have to do to get this to work? Thanks.
 >
 > It seems that the ethernet and sata "option roms" are always using up bios
 > extension space, even when they are "disabled". Is there a magic setting
to
 > REALLY disable the roms, while leaving the devices active? The SATA one
seems to
 > always use space even when there are no sata drives attached (!?). Thanks<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: 2885 scsi sata confilct