Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

6ata4 motherboard

 
   Hardware Problem Solving Community! (Home) -> Chaintech RSS
Next:  Chaintech finally posts version 2.0 BIOS for VNF3..  
Author Message
Eugene J. Maes

External


Since: Jul 05, 2004
Posts: 2



(Msg. 1) Posted: Wed Sep 08, 2004 3:36 am
Post subject: 6ata4 motherboard
Archived from groups: alt>comp>periphs>mainboard>chaintech (more info?)

I am trying to find out if there is a size limit to the type of harddrive I
can use with my chaintech 6ata4 motherboard?

I would like to know if I can use any of the 30mb. 60mb or 80mb hard
drives?????

--
Eugene J. Maes
emaes.DeleteThis@hotmail.com

 >> Stay informed about: 6ata4 motherboard 
Back to top
Login to vote
Ugly Mugly1

External


Since: Aug 10, 2004
Posts: 25



(Msg. 2) Posted: Wed Sep 08, 2004 10:07 am
Post subject: Re: 6ata4 motherboard [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Eugene J. Maes wrote:
 > I am trying to find out if there is a size limit to the type of
 > harddrive I can use with my chaintech 6ata4 motherboard?
 >
 > I would like to know if I can use any of the 30mb. 60mb or 80mb hard
 > drives?????

You mean 30Gb, 60Gb, or 80Gb? As cheap as drives are, you should buy one
and see. If it doesn't work, just purchase an ATA100 Controller card, and
use that to connect the hard drive to.<!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: 6ata4 motherboard 
Back to top
Login to vote
Lazarus4

External


Since: Aug 29, 2004
Posts: 21



(Msg. 3) Posted: Thu Sep 09, 2004 1:18 am
Post subject: Re: 6ata4 motherboard [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

I have a 6bta2 and i flashed the bios to one released in 1999 to overcome
the 32gb limit and fitted an 80gig

I too wonder how far I can go but I would imagine the next upward limit will
be 127gigs

If you cant run the larger drive stick it someone else machine,format it and
put it back in your own machine

Problem solved!

"Ugly Mugly" <umugly RemoveThis @nospam.hotmail.com> wrote in message
news:10jttg9haoist17@corp.supernews.com...
 > Eugene J. Maes wrote:
  > > I am trying to find out if there is a size limit to the type of
  > > harddrive I can use with my chaintech 6ata4 motherboard?
  > >
  > > I would like to know if I can use any of the 30mb. 60mb or 80mb hard
  > > drives?????
 >
 > You mean 30Gb, 60Gb, or 80Gb? As cheap as drives are, you should buy one
 > and see. If it doesn't work, just purchase an ATA100 Controller card, and
 > use that to connect the hard drive to.
 >
 >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: 6ata4 motherboard 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
CT-6ATA4 motherboard - I would like some information on my motherboard CT-6ATA4. First, what is the largest hard drive can I use with this motherboard???? Second Will it work with Windows XP?????? -- Eugene J. Maes emaes@hotmail.com

7VJL Apogee how too O/C XP2400? - I have run my pc at mem 166 cpu 150 and booted into linux ok. so I think i am able to over clock this chip pretty good. I do not want to have my pci spec so far out though. How do you unlock the multipliers? I though all xp2400 were factory unlocked? I...

BIOS CHIPS : New Replacement Bios Chips or Re - Flash - visit www.bioschips.webhop.net For Replacement chips $14 re-flash of existing chip $8

Handigator - Rellay need some help. Hust installed a new 9cjs and everything seems to be working ok except the Handigator. Are there drivers, bois setting's, etc required to get this to work? Do I need to install IR support to XP? Any help will be great. Steve

need info on the 9EJS1 Zenith Cbox2 front panel audio conn.. - I would like to use the two audio jacks in my Cbox2 and I know that the mboard has the cable connector needed for that, but it can only be used with the mboard's onboard audio chip. I would like to use those two jacks with my Audigy 2 sound card. I've..
   Hardware Problem Solving Community! (Home) -> Chaintech All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]