Welcome to HardwareForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

8DRA3+ connector for front panel USB

  
   Hardware Problem Solving Community! (Home) -> Epox RSS
Related Topics:
Elementary question re: front side bus - My is described as 200/266 FSB. How do I determine if what I have is the one or the other, or both? The manual's features section gives processor as Athlon, operating at 600 - ~1.3 GHz. However, the Epox proc. list..

12V power connector required? - 1) I got my 8RDAE working for about 60 minutes, loaded W98SE onto a 2.5GB HDD to see all was OK before the 80GB HDD. I did note the POST debug LED sayed on after booting - reading but booted, loaded and worked fine. Is this..

8RGA+ ... no sound control panel ? - Loaded the drivers Epox ship with this booard - but can't find any kind of sound control panel. Should there be one - and if not, anyone know of a good app for WinXP sound control (with etc - Winamp appears to be Winamp rather than..

8rda Nforce audio control panel - I've just built on this with XP Pro. I installed SP1 etc and then the Nfroce drivers from the CD. Whilst I get sound and under I can set to the nvidia output and can get 4 channel sound, the Nvidia audio control panel has not..

Epox 8KHA+ - Maximum hard drive size? - Does anyone know, what is the biggest hard drive that the 8KHA+ can use? I mean the largest drive that the BIOS can handle. I don't want to use an overlay driver. Epox says that the largest they have tested is 80 gigs, but that doesn't..
Author Message
Al

External


Since: Sep 22, 2006
Posts: 2



(Msg. 1) Posted: Fri Sep 22, 2006 3:31 pm
Post subject: 8DRA3+ connector for front panel USB
Archived from groups: alt>comp>periphs>mainboard>epox (more info?)
Anyone get the front panel USB [CUSB3] connector to work?

Pin-outs in manual and for case are identical. Yet, the port is not
recognized.

Thanks.........

 >> Stay informed about: 8DRA3+ connector for front panel USB 
Back to top
Login to vote
David Lee1

External


Since: Jul 27, 2003
Posts: 11



(Msg. 2) Posted: Tue Sep 26, 2006 12:00 am
Post subject: Re: 8DRA3+ connector for front panel USB [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Al <alan.TakeThisOut@ridersite.org> wrote in
news:8_ydnQh9Tq54pInYnZ2dnUVZ_sqdnZ2d@comcast.com:

> Anyone get the front panel USB [CUSB3] connector to work?
>
> Pin-outs in manual and for case are identical. Yet, the port is not
> recognized.
>
> Thanks.........

Not a 3+, but a RDA+ and a RDA3AI with no problems. My Antec case uses
individual connectors for each pin which does make it a pain, though.


Dave

 >> Stay informed about: 8DRA3+ connector for front panel USB 
Back to top
Login to vote
dave

External


Since: Jun 12, 2006
Posts: 59



(Msg. 3) Posted: Tue Sep 26, 2006 6:44 am
Post subject: Re: 8DRA3+ connector for front panel USB [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Mine works perfectly, but I have an 8RDA+. You might want to ask your
question here http://forums.pcper.com/forumdisplay.php?s=&forumid=9

DaveL


"Al" <alan RemoveThis @ridersite.org> wrote in message
news:8_ydnQh9Tq54pInYnZ2dnUVZ_sqdnZ2d@comcast.com...
> Anyone get the front panel USB [CUSB3] connector to work?
>
> Pin-outs in manual and for case are identical. Yet, the port is not
> recognized.
> Thanks.........
 >> Stay informed about: 8DRA3+ connector for front panel USB 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> Epox All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]