Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Epox 8KHA+ latest BIOS

  
   Hardware Problem Solving Community! (Home) -> Epox RSS
Next:  bios version  
Author Message
Michael19

External


Since: Nov 20, 2003
Posts: 1



(Msg. 1) Posted: Thu Nov 20, 2003 7:50 am
Post subject: Epox 8KHA+ latest BIOS
Archived from groups: alt>comp>periphs>mainboard>epox (more info?)
I know its an old board so dont flame me.
Is the latest BIOS for this Epox board the 8KHI3425?

will I notice the difference between 1600+ and 2600+
and what is the safest way to flash the bios?

thanks

 >> Stay informed about: Epox 8KHA+ latest BIOS 
Back to top
Login to vote
Steve K

External


Since: Nov 20, 2003
Posts: 6



(Msg. 2) Posted: Thu Nov 20, 2003 10:31 am
Post subject: Re: Epox 8KHA+ latest BIOS [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
"Michael" <michael1@.com> wrote in message
news:NKXub.20674$nE6.4463385@news4.srv.hcvlny.cv.net
 > I know its an old board so dont flame me.
 > Is the latest BIOS for this Epox board the 8KHI3425?
 >
 > will I notice the difference between 1600+ and 2600+
 > and what is the safest way to flash the bios?
 >
 > thanks

So far I know it is the latest - working here since a couple of month.
Difference between 1600+ and 2600+ ??? - yes, you can see it...it is faster!
I always flashed from a DOS boot floppy - never had problems! *Reset* the
bios after the flash - this prevents unpleasent surprises but you have to
memorise all bios setting before loading defaults...<!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: Epox 8KHA+ latest BIOS 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Epox EP-8KHA+ (rev. 2.0) - I have destroyed my Mainboard Epox EP-8KHA+ (rev. 2.0) and i need your help. I would be pleased if have the condenser C139 and the re-stand R375 judges what kind of would tell me somebody. The two elements lie right above on the right between an IC and....

Epox 8KHA+ and 166FSB?? - Hi I would like some confirmation as to whether or not this EPOX 8KHA+ MB will do 166FSB! This is an older VIA KT266A based board that many have successfully overclocked. I know there has been some discusion in the past over the existance a PCI/AGP..

166 FSB on 8KHA+ German Epox sites says 2800+ is possible - Hi, Has anybody here tried a 166 FSB CPU on the 8KHA+? The german Epox website has the 2800+ at 166 (333) FSB listed as the maximum for that mobo. But the dutch site has an older list stating 1600+ is the maximum. I contacted the dutch Epox support..

overclock tips for Epox 8KHA+ ? - I've, as I mentioned, an Epox 8KHA+ motherboard, and was wondering if I can get some overclocking tips. Basically, how. =) The CPU is an Athalon 1600 (1.4GHz) and 1 stick of 512MB 2100 DRAM. Web searching and searching has lead me to reviews of the..

Epox 8KHA+ and Radeon 9500 = does not boot - Hi, I have a 8KHA+ and bought a Club3D Radeon 9500 non pro (old Layout - 8 layers). Without additional power connector, the system boots and the correct error message show up. When i connect the card to the power supply, the system does not boot up at..
   Hardware Problem Solving Community! (Home) -> Epox All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]