Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

8RDA+ help needed

 
   Hardware Problem Solving Community! (Home) -> Epox RSS
Next:  eSATA on Asus P5WDH - Vista Compatiblity - Config..  
Author Message
lmacmil

External


Since: Nov 15, 2004
Posts: 55



(Msg. 1) Posted: Fri Feb 16, 2007 5:29 pm
Post subject: 8RDA+ help needed
Archived from groups: alt>comp>periphs>mainboard>epox (more info?)

Today I upgraded my 2nd PC, a Win98SE machine which is used as a 2nd
internet terminal. I replaced a Socket 7 mobo with my son's 8RDA+ with a
1200mhz Duron and 256mb RAM. I transferred the only 2 cards I was using:
low end Geforce (MX64 from LeadTek) and LAN card.

I have been unable to get anything other than 16 color 640x480 video and no
network connection (I have tried 2 different network cards.) I have tried
to load the nForce mobo drivers without success (setup just stops) and both
nVidia and Leadtek drivers for the video card, also without success. On the
video driver setup, it asks if I want to install the AGP VGART and when I
say yet, it says device ID incorrect and exits. There is no network card
shown in the device manager. I have managed to get the LeakTek card
recognized but still unable to load the nVidia drivers.

Any suggestions? I'm out of ideas.

Thanks.

 >> Stay informed about: 8RDA+ help needed 
Back to top
Login to vote
dave

External


Since: Jun 12, 2006
Posts: 59



(Msg. 2) Posted: Fri Feb 16, 2007 5:29 pm
Post subject: Re: 8RDA+ help needed [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Format the hard drive and load a fresh Windows XP.

DaveL


"Lee M." <lmacmil.TakeThisOut@forget_it.com> wrote in message
news:d9qdnfrPFrrErUvYnZ2dnUVZ_qyjnZ2d@comcast.com...
> Today I upgraded my 2nd PC, a Win98SE machine which is used as a 2nd
> internet terminal. I replaced a Socket 7 mobo with my son's 8RDA+ with a
> 1200mhz Duron and 256mb RAM. I transferred the only 2 cards I was using:
> low end Geforce (MX64 from LeadTek) and LAN card.
>
> I have been unable to get anything other than 16 color 640x480 video and
> no network connection (I have tried 2 different network cards.) I have
> tried to load the nForce mobo drivers without success (setup just stops)
> and both nVidia and Leadtek drivers for the video card, also without
> success. On the video driver setup, it asks if I want to install the AGP
> VGART and when I say yet, it says device ID incorrect and exits. There is
> no network card shown in the device manager. I have managed to get the
> LeakTek card recognized but still unable to load the nVidia drivers.
>
> Any suggestions? I'm out of ideas.
>
> Thanks.
>

 >> Stay informed about: 8RDA+ help needed 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
8RDA+ max VDD ? - What's the max VDD (native) available on an 8RDA+ ? TIA UN

8RDA+ - I previously posted about what settings to use for a 2600+ processor on a 8RDA+ board, I have since found out that although the package says AMD XP2600+ Thoroughbred 2.13Ghz 266Mhz Front Side Bus the chip has an OPN of AXDA2600DKV4D which means it is a..

8RDA+ - I have been having problems with my new 8RDA+ version 2 mainboard (to summerise, I can install wndows 98se but not Linux or Win XP; After posting in this newsgroup I found out that my 2600+ was a 1.917ghz Barton not 2.13ghz Throughbred as described on th...

C-A-D On 8RDA+ - Hi! I recewntly installed an *RDA+ board, and find I can't use C-A-D to reboot it. According to the knowledge base, the usual cause is the CPU fan speed being too low. Does anyone know what speed the board is looking for? Has anyone else had the..

8RDA+ - I have an Epox 8RDA+ trhat works a treat and was wandering if I could use the firwire port to transfer data from my PC to another PC with a Firewire card installed, but using only one cable directly from PC to PC? Such as a network crossover cable? ..
   Hardware Problem Solving Community! (Home) -> Epox All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]