Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

8rda+ V1.1 & 3000 400Mhz

 
   Hardware Problem Solving Community! (Home) -> Epox RSS
Next:  What happened to Epox?  
Author Message
Hugh Sutherland

External


Since: Feb 29, 2004
Posts: 18



(Msg. 1) Posted: Tue Jan 02, 2007 12:28 am
Post subject: 8rda+ V1.1 & 3000 400Mhz
Archived from groups: alt>comp>periphs>mainboard>epox (more info?)

Should a AMD ATHLON XP3000 400Mhz cpu clock down to 333 if my board only
goes that high?

My system turns on for 3 seconds then turns off. Nothing on screen and I
have the latest bios. I can't get to the bios setup screen anyways. I know
the chip is good.

Any suggestions?

 >> Stay informed about: 8rda+ V1.1 & 3000 400Mhz 
Back to top
Login to vote
dave

External


Since: Jun 12, 2006
Posts: 59



(Msg. 2) Posted: Tue Jan 02, 2007 10:57 am
Post subject: Re: 8rda+ V1.1 & 3000 400Mhz [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

If Grahams suggestion does not work try this. Take the board out of the
case. Set the clear cmos jumper to clear. Remove the battery and let it
sit for 15 minutes. The put the battery back in and set the clear cmos
jumper back to the normal position. Lay the board on a non-conduct surface
and hook only the power supply and video card to it and the monitor to the
video card. Take a small flat blade screw driver and momentarily short the
power switch connector on the board. If you still don't get a display then
try another power supply. If still no go then either the cpu is bad or not
compatible or the motherboard is bad. Also note what the led display
indicates.

DaveL



"Graham W" <graham.DeleteThis@his.com.puter.INVALID> wrote in message
news:459a5db5$0$8750$ed2619ec@ptn-nntp-reader02.plus.net...
>
>
> Hugh Sutherland wrote:
>> Should a AMD ATHLON XP3000 400Mhz cpu clock down to 333 if my board only
>> goes that high?
>>
>> My system turns on for 3 seconds then turns off. Nothing on screen and
>> I have the latest bios. I can't get to the bios setup screen anyways.
>> I know the chip is good.
>>
>
> Hold down the <Insert> key while starting up - puts default values back
> into the BIOS.
>
> HNY
>
>

 >> Stay informed about: 8rda+ V1.1 & 3000 400Mhz 
Back to top
Login to vote
Graham W

External


Since: May 13, 2004
Posts: 74



(Msg. 3) Posted: Tue Jan 02, 2007 1:27 pm
Post subject: Re: 8rda+ V1.1 & 3000 400Mhz [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Hugh Sutherland wrote:
> Should a AMD ATHLON XP3000 400Mhz cpu clock down to 333 if my board only
> goes that high?
>
> My system turns on for 3 seconds then turns off. Nothing on screen and
> I have the latest bios. I can't get to the bios setup screen anyways.
> I know the chip is good.
>

Hold down the <Insert> key while starting up - puts default values back
into the BIOS.

HNY


--
Graham W http://www.gcw.org.uk/ PGM-FI page updated, Graphics Tutorial
WIMBORNE http://www.wessex-astro.org.uk/ Wessex Astro Society's Website
Dorset UK Info, Meeting Dates, Sites & Maps
Change 'news' to 'sewn' in my Reply address to avoid my spam filter.
 >> Stay informed about: 8rda+ V1.1 & 3000 400Mhz 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
8RDA+ max VDD ? - What's the max VDD (native) available on an 8RDA+ ? TIA UN

8RDA+ - I previously posted about what settings to use for a 2600+ processor on a 8RDA+ board, I have since found out that although the package says AMD XP2600+ Thoroughbred 2.13Ghz 266Mhz Front Side Bus the chip has an OPN of AXDA2600DKV4D which means it is a..

8RDA+ - I have been having problems with my new 8RDA+ version 2 mainboard (to summerise, I can install wndows 98se but not Linux or Win XP; After posting in this newsgroup I found out that my 2600+ was a 1.917ghz Barton not 2.13ghz Throughbred as described on th...

C-A-D On 8RDA+ - Hi! I recewntly installed an *RDA+ board, and find I can't use C-A-D to reboot it. According to the knowledge base, the usual cause is the CPU fan speed being too low. Does anyone know what speed the board is looking for? Has anyone else had the..

8RDA+ - I have an Epox 8RDA+ trhat works a treat and was wandering if I could use the firwire port to transfer data from my PC to another PC with a Firewire card installed, but using only one cable directly from PC to PC? Such as a network crossover cable? ..
   Hardware Problem Solving Community! (Home) -> Epox All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]