9CJS & C3Box

OK, checked out all the things you pointed at, everything was OK. Handigator
works (red LED works) USB and audio connectors are functional but still I
can't read my SM cards.I heard some rumors thad any card reader is pain in
the ass for XP OS. Since I'm running XP Pro that may be the source of my
problems?! From Chaintech site I downloaded latest drivers for CBOX3 but in
the file there are only Win98 and Win2K folders and when I execute setup
file, my sistem says that it's an XP system wich needs no other drivers for
card reader. Still, automatic nor manual instalation don't bring the reader
in the hardware list. Any ideas?
Last week we discussed driver update for Intel RAID controller (corrupted
ZIP file on Chaintech site). Any news 'bout that? Could it be downloaded
from INTEL web site or it is written by Chaintecheers?

Thanx for all your help so far!

Davor

"Lazarus" <a DeleteThis @b.c> wrote in message news:cihc0i$dt8$1@titan.btinternet.com...
 > Have you connected the WOL lead
 >
 > AND SET WOL TO ACTIVE IN THE BIOS
 >
 > when you do BOTH of these things your c box will light up like a xmas
tree!
 >
 >
 > "DigiSign" <ds DeleteThis @carnet.hr> wrote in message
 > news:cia41j$9ob$1@garrison.globalnet.hr...
  > > Hello!
  > > Installed drivers I got with MoBo tripple check all the cable
connections,
  > > and still can't read smart media card.
  > > There are two LED on front panel, are they supposed to lit (mine
don't)!?
  > > There's an jumper (JP6) mentioned in the manual, I left it in default
  > > possition (VCC5SBY). What it is there for? Should it be set to USB5V to
 > make
  > > card readers work?
  > >
  > >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: 9CJS & C3Box 

I did report the corrupt file but so far no response!


"DigiSign" <ds.DeleteThis@carnet.hr> wrote in message
news:ciki7i$vgg$1@garrison.globalnet.hr...
 > OK, checked out all the things you pointed at, everything was OK.
Handigator
 > works (red LED works) USB and audio connectors are functional but still I
 > can't read my SM cards.I heard some rumors thad any card reader is pain in
 > the ass for XP OS. Since I'm running XP Pro that may be the source of my
 > problems?! From Chaintech site I downloaded latest drivers for CBOX3 but
in
 > the file there are only Win98 and Win2K folders and when I execute setup
 > file, my sistem says that it's an XP system wich needs no other drivers
for
 > card reader. Still, automatic nor manual instalation don't bring the
reader
 > in the hardware list. Any ideas?
 > Last week we discussed driver update for Intel RAID controller (corrupted
 > ZIP file on Chaintech site). Any news 'bout that? Could it be downloaded
 > from INTEL web site or it is written by Chaintecheers?
 >
 > Thanx for all your help so far!
 >
 > Davor
 >
 > "Lazarus" <a.DeleteThis@b.c> wrote in message
news:cihc0i$dt8$1@titan.btinternet.com...
  > > Have you connected the WOL lead
  > >
  > > AND SET WOL TO ACTIVE IN THE BIOS
  > >
  > > when you do BOTH of these things your c box will light up like a xmas
 > tree!
  > >
  > >
  > > "DigiSign" <ds.DeleteThis@carnet.hr> wrote in message
  > > news:cia41j$9ob$1@garrison.globalnet.hr...
   > > > Hello!
   > > > Installed drivers I got with MoBo tripple check all the cable
 > connections,
   > > > and still can't read smart media card.
   > > > There are two LED on front panel, are they supposed to lit (mine
 > don't)!?
   > > > There's an jumper (JP6) mentioned in the manual, I left it in default
   > > > possition (VCC5SBY). What it is there for? Should it be set to USB5V
to
  > > make
   > > > card readers work?
   > > >
   > > >
  > >
  > >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: 9CJS & C3Box 

My last post is WRONG I did get a response

Dear Sir:

I shall relay that info to our webmaster. BTW which newsgroup did you
see this at? Provide a link if possible.

Yours sincerely,
Chaintech Technical Support

Chaintech Europe
Coenecoop 620
2741 PV WADDINXVEEN
THE NETHERLANDS

( Phone: +31-(0)182-623960
( Fax: +31-(0)182-623964
* E-mail: support.TakeThisOut@GHGHGHchaintech.nl <mailto:support@ASDFGchaintech.nl>
: Web: <http://www.chaintech.dk/>

I`ve never actually tried the card slots as I dont even know what these
cards are! Sorry I can help.....maybe you could phone them? It would be
interesting to put them on the spot to see what they say!





"Lazarus" <a.TakeThisOut@b.c> wrote in message
news:cikurg$k1e$1@sparta.btinternet.com...
 > I did report the corrupt file but so far no response!
 >
 >
 > "DigiSign" <ds.TakeThisOut@carnet.hr> wrote in message
 > news:ciki7i$vgg$1@garrison.globalnet.hr...
  > > OK, checked out all the things you pointed at, everything was OK.
 > Handigator
  > > works (red LED works) USB and audio connectors are functional but still
I
  > > can't read my SM cards.I heard some rumors thad any card reader is pain
in
  > > the ass for XP OS. Since I'm running XP Pro that may be the source of my
  > > problems?! From Chaintech site I downloaded latest drivers for CBOX3 but
 > in
  > > the file there are only Win98 and Win2K folders and when I execute setup
  > > file, my sistem says that it's an XP system wich needs no other drivers
 > for
  > > card reader. Still, automatic nor manual instalation don't bring the
 > reader
  > > in the hardware list. Any ideas?
  > > Last week we discussed driver update for Intel RAID controller
(corrupted
  > > ZIP file on Chaintech site). Any news 'bout that? Could it be downloaded
  > > from INTEL web site or it is written by Chaintecheers?
  > >
  > > Thanx for all your help so far!
  > >
  > > Davor
  > >
  > > "Lazarus" <a.TakeThisOut@b.c> wrote in message
 > news:cihc0i$dt8$1@titan.btinternet.com...
   > > > Have you connected the WOL lead
   > > >
   > > > AND SET WOL TO ACTIVE IN THE BIOS
   > > >
   > > > when you do BOTH of these things your c box will light up like a xmas
  > > tree!
   > > >
   > > >
   > > > "DigiSign" <ds.TakeThisOut@carnet.hr> wrote in message
   > > > news:cia41j$9ob$1@garrison.globalnet.hr...
   > > > > Hello!
   > > > > Installed drivers I got with MoBo tripple check all the cable
  > > connections,
   > > > > and still can't read smart media card.
   > > > > There are two LED on front panel, are they supposed to lit (mine
  > > don't)!?
   > > > > There's an jumper (JP6) mentioned in the manual, I left it in
default
   > > > > possition (VCC5SBY). What it is there for? Should it be set to USB5V
 > to
   > > > make
   > > > > card readers work?
   > > > >
   > > > >
   > > >
   > > >
  > >
  > >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: 9CJS & C3Box 

Hi!

Thank you really very much for all your efforts.Tryed to e-mail them for a
start!
By the way this card readers are made for reading some kind of solid state
memory used in digital cameras, produced in several formates (SmartMedia,
Compact Flash, Microdrive etc.)
"Lazarus" <a RemoveThis @b.c> wrote in message news:cikv36$lje$1@titan.btinternet.com...
 > My last post is WRONG I did get a response
 >
 > Dear Sir:
 >
 > I shall relay that info to our webmaster. BTW which newsgroup did you
 > see this at? Provide a link if possible.
 >
 > Yours sincerely,
 > Chaintech Technical Support
 >
 > Chaintech Europe
 > Coenecoop 620
 > 2741 PV WADDINXVEEN
 > THE NETHERLANDS
 >
 > ( Phone: +31-(0)182-623960
 > ( Fax: +31-(0)182-623964
 > * E-mail: support RemoveThis @GHGHGHchaintech.nl <mailto:support@ASDFGchaintech.nl>
 > : Web: <http://www.chaintech.dk/>
 >
 > I`ve never actually tried the card slots as I dont even know what these
 > cards are! Sorry I can help.....maybe you could phone them? It would be
 > interesting to put them on the spot to see what they say!
 >
 >
 >
 >
 >
 > "Lazarus" <a RemoveThis @b.c> wrote in message
 > news:cikurg$k1e$1@sparta.btinternet.com...
  > > I did report the corrupt file but so far no response!
  > >
  > >
  > > "DigiSign" <ds RemoveThis @carnet.hr> wrote in message
  > > news:ciki7i$vgg$1@garrison.globalnet.hr...
   > > > OK, checked out all the things you pointed at, everything was OK.
  > > Handigator
   > > > works (red LED works) USB and audio connectors are functional but
still
 > I
   > > > can't read my SM cards.I heard some rumors thad any card reader is
pain
 > in
   > > > the ass for XP OS. Since I'm running XP Pro that may be the source of
my
   > > > problems?! From Chaintech site I downloaded latest drivers for CBOX3
but
  > > in
   > > > the file there are only Win98 and Win2K folders and when I execute
setup
   > > > file, my sistem says that it's an XP system wich needs no other
drivers
  > > for
   > > > card reader. Still, automatic nor manual instalation don't bring the
  > > reader
   > > > in the hardware list. Any ideas?
   > > > Last week we discussed driver update for Intel RAID controller
 > (corrupted
   > > > ZIP file on Chaintech site). Any news 'bout that? Could it be
downloaded
   > > > from INTEL web site or it is written by Chaintecheers?
   > > >
   > > > Thanx for all your help so far!
   > > >
   > > > Davor
   > > >
   > > > "Lazarus" <a RemoveThis @b.c> wrote in message
  > > news:cihc0i$dt8$1@titan.btinternet.com...
   > > > > Have you connected the WOL lead
   > > > >
   > > > > AND SET WOL TO ACTIVE IN THE BIOS
   > > > >
   > > > > when you do BOTH of these things your c box will light up like a
xmas
   > > > tree!
   > > > >
   > > > >
   > > > > "DigiSign" <ds RemoveThis @carnet.hr> wrote in message
   > > > > news:cia41j$9ob$1@garrison.globalnet.hr...
   > > > > > Hello!
   > > > > > Installed drivers I got with MoBo tripple check all the cable
   > > > connections,
   > > > > > and still can't read smart media card.
   > > > > > There are two LED on front panel, are they supposed to lit (mine
   > > > don't)!?
   > > > > > There's an jumper (JP6) mentioned in the manual, I left it in
 > default
   > > > > > possition (VCC5SBY). What it is there for? Should it be set to
USB5V
  > > to
   > > > > make
   > > > > > card readers work?
   > > > > >
   > > > > >
   > > > >
   > > > >
   > > >
   > > >
  > >
  > >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: 9CJS & C3Box