Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

9NPA+Ultra memory recommendations

 
   Hardware Problem Solving Community! (Home) -> Epox RSS
Next:  SN41G2 strange power up behaviour  
Author Message
Kevin

External


Since: Feb 07, 2005
Posts: 4



(Msg. 1) Posted: Sat Sep 24, 2005 7:04 am
Post subject: 9NPA+Ultra memory recommendations
Archived from groups: alt>comp>periphs>mainboard>epox (more info?)

Hey all!

I purchased the 9npa+ultra board but, after a week and a half of looking
for good memory for it, I'm at a loss. Since the latest BIOS versions
support DDR500 for the rev. E Athlon 64s, I figured why not go with that
(1GB total for now, with possible upgrade later). However, I cannot
sort out all the choices, especially with regards to performance RAM
like the OCZ or Mushkin Redline that perform better at higher voltages.

What I am looking for is a good performing (not necessarily the best as
I'm not much of a gamer), stable RAM for the system. I figured I'd
utilize the dual channel capability by using a 2x512mb kit (any reason
not to???). I'll be running the board with a Venice core 3000+ and
Sapphire X800XL if it makes a difference (I know the chip does since the
memory controller is onboard...but mainly since it's a rev. E as stated
earlier).

I've tried doing my homework, but I keep getting mixed results. Please
someone set me straight!!!


Thanks all!

Kevin

P.S. Please take underscore out of the return address if you wish to
respond directly.

 >> Stay informed about: 9NPA+Ultra memory recommendations 
Back to top
Login to vote
Old Hippy

External


Since: Jul 01, 2003
Posts: 12



(Msg. 2) Posted: Sun Sep 25, 2005 10:55 am
Post subject: Re: 9NPA+Ultra memory recommendations [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Hello
I use Corsair XMS got it from newegg.
Decient price and never had a problem with that brand even when
overcolcking!!.
Old Hippy

"Kevin" <dressel1_.DeleteThis@charter.net> wrote in message
news:VgbZe.6255$X6.3268@fe05.lga...
> Hey all!
>
> I purchased the 9npa+ultra board but, after a week and a half of looking
> for good memory for it, I'm at a loss. Since the latest BIOS versions
> support DDR500 for the rev. E Athlon 64s, I figured why not go with that
> (1GB total for now, with possible upgrade later). However, I cannot sort
> out all the choices, especially with regards to performance RAM like the
> OCZ or Mushkin Redline that perform better at higher voltages.
>
> What I am looking for is a good performing (not necessarily the best as
> I'm not much of a gamer), stable RAM for the system. I figured I'd
> utilize the dual channel capability by using a 2x512mb kit (any reason not
> to???). I'll be running the board with a Venice core 3000+ and Sapphire
> X800XL if it makes a difference (I know the chip does since the memory
> controller is onboard...but mainly since it's a rev. E as stated earlier).
>
> I've tried doing my homework, but I keep getting mixed results. Please
> someone set me straight!!!
>
>
> Thanks all!
>
> Kevin
>
> P.S. Please take underscore out of the return address if you wish to
> respond directly.

 >> Stay informed about: 9NPA+Ultra memory recommendations 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
9NPA+ ultra - Talked to a guy a Epox yesterday and said this board should arrive in the USA early next week. I wonder if the XP-120 heatsink will fit on this board? Thanks

EP-9NPA+Ultra and 20pin ATX - Hi everyone... I'm considering purchasing an EP-9NPA+Ultra to run an X2 build. I have an Enermax EG651P-VE 550W PSU that has a 20 pin ATX connector. I've ordered a 20-24 pin adapter. Are there any issues with this board and a 20 pin ATX power line?..

X2 9NPA+ Ultra and older BIOS - I have a new build with a 3800X2 and 9NPA+ Ultra mobo that won't POST (see the previous thread for details). I figure that it's a flaky board, but it was suggested to me that if the BIOS was pre 08/05 it might not recognize the X2. I thought that the..

Opteron 170 voltage and 9NPA+ Ultra - The opty 170s are rated as a 1.35v chip. On my Epox board (actually 2 builds) the voltage at default shows up as 1.41-1.43. Since I'm adding .15v to be stable at 2550, I'm getting a reading of 1.56-1.58 in the BIOS and Windows (Speedfan, CPUZ). My temps...

Epox EP-9NPA+Ultra /AMD 3700+ San Diego lock ups - Greetings, I recently assembled a new system with the following parts: 1) Epox EP-9NPA+ Ultra motherboard 2) Coolmax 550W power supply 3) AMD Athlon 64 3700+ San Diego, 939 socket 4) Corsar 1Gb RAM, latency 2 5) Maxtor DiamondMax 10, 300Gb 6) ATI..
   Hardware Problem Solving Community! (Home) -> Epox All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]