Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Another 9VJL3 that won't post

  
   Hardware Problem Solving Community! (Home) -> Chaintech RSS
Next:  chaintech 9VJL3 won't post - Please advise  
Author Message
Mat

External


Since: Oct 07, 2004
Posts: 2



(Msg. 1) Posted: Sat Feb 07, 2004 5:14 pm
Post subject: Another 9VJL3 that won't post
Archived from groups: alt>comp>periphs>mainboard>chaintech (more info?)
Similar to another post on this board - I too have a 9VJL3 that won't
post. I am using components that work in another system.

I don't get any beep codes whatsoever. No video - no nothing. Power
is getting to the board because the CPU fan spins up - that is about
it.

One potential problem might be my power supply. It was sufficient for
an Abit KT7A - however it only has one 20-pin ATX connector - not the
additional 4-pin and 6-pin connectors like on my 9VJL3 board.

Could this be a potential problem?

Thanks,

MJR

 >> Stay informed about: Another 9VJL3 that won't post 
Back to top
Login to vote
Lazarus1

External


Since: Jul 08, 2004
Posts: 24



(Msg. 2) Posted: Sun Feb 08, 2004 2:40 am
Post subject: Re: Another 9VJL3 that won't post [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
You wont get a post until you load the bios defaults......thats the way it
works on any systems I have built.

I bet you its your video card it doesnt like...try others......is it an ATI
card by any chance? There are lots of people who cannot get these to work
with chaintech mb``s myself included.

Look on their site....its all Geforce cards....see any ATI or even a mention
of them?

It smells fishy to me and to others I know!

I had an ATI 32mb DDR card which works perfect in 2 systems I have....it
would not work in the chaintech 9cjs and I tried everything including
increasing the voltage slightly after advice but still nowt!

It a conspiracy if u ask me!


"Mat" <mjriain DeleteThis @hotmail.com> wrote in message
news:1651e909.0402071414.7d75e403@posting.google.com...
 > Similar to another post on this board - I too have a 9VJL3 that won't
 > post. I am using components that work in another system.
 >
 > I don't get any beep codes whatsoever. No video - no nothing. Power
 > is getting to the board because the CPU fan spins up - that is about
 > it.
 >
 > One potential problem might be my power supply. It was sufficient for
 > an Abit KT7A - however it only has one 20-pin ATX connector - not the
 > additional 4-pin and 6-pin connectors like on my 9VJL3 board.
 >
 > Could this be a potential problem?
 >
 > Thanks,
 >
 > MJR<!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: Another 9VJL3 that won't post 
Back to top
Login to vote
jOhN106

External


Since: Dec 07, 2003
Posts: 13



(Msg. 3) Posted: Sun Feb 08, 2004 6:46 am
Post subject: Re: Another 9VJL3 that won't post [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Lazarus wrote:
 > You wont get a post until you load the bios defaults......thats the way it
 > works on any systems I have built.
 >
 > I bet you its your video card it doesnt like...try others......is it an ATI
 > card by any chance? There are lots of people who cannot get these to work
 > with chaintech mb``s myself included.
 >
 > Look on their site....its all Geforce cards....see any ATI or even a mention
 > of them?
 >
 > It smells fishy to me and to others I know!
 >
 > I had an ATI 32mb DDR card which works perfect in 2 systems I have....it
 > would not work in the chaintech 9cjs and I tried everything including
 > increasing the voltage slightly after advice but still nowt!
 >
 > It a conspiracy if u ask me!
 >
 >
 > "Mat" <mjriain.RemoveThis@hotmail.com> wrote in message
 > news:1651e909.0402071414.7d75e403@posting.google.com...
 >
  >>Similar to another post on this board - I too have a 9VJL3 that won't
  >>post. I am using components that work in another system.
  >>
  >>I don't get any beep codes whatsoever. No video - no nothing. Power
  >>is getting to the board because the CPU fan spins up - that is about
  >>it.
  >>
  >>One potential problem might be my power supply. It was sufficient for
  >>an Abit KT7A - however it only has one 20-pin ATX connector - not the
  >>additional 4-pin and 6-pin connectors like on my 9VJL3 board.
  >>
  >>Could this be a potential problem?
  >>
  >>Thanks,
  >>
  >>MJR
 >
 >
 >
Pulled from Intel's website:
"All Pentium 4 processor-based systems require the standard 2x10,
20-pin ATX power connector as well as the 2x2, 4-pin 12V connector. Most
ATX form factor-based motherboards with fully loaded system
configurations may also require the 1x6, 6-pin connector. Consult the
motherboard documentation to determine power supply requirements."

You're going nowhere until you get a new power supply that matches the
ATX 12V spec.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Another 9VJL3 that won't post 
Back to top
Login to vote
Mat

External


Since: Oct 07, 2004
Posts: 2



(Msg. 4) Posted: Sun Feb 08, 2004 6:46 am
Post subject: Re: Another 9VJL3 that won't post [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Thanks guys for the advice. I'll try it with another PSU.
 >> Stay informed about: Another 9VJL3 that won't post 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
chaintech 9VJL3 won't post - Please advise - Brand new Chaintech 9VJL3 MB from NewEgg: tried 2 different PS (250 & 300W), 3 different video cards (both PCI & AGP), 2 different sticks of ram and 2 different CPU's (both 1.7 P4 Celeron). All components work in other systems. System fans ...

9VJL3 thermal sensors - The 9VJL3 is an entry-level P4 (I am using a Celeron 1.7) board. I don't see any bios-level temperature indicators and I can't lead MBM to find any, either. Can anyone tell me if the board has any thermal sensors? Does the Celeron report temperatures?...

7NJL6 no-post problem - I bought the 7NJL6 + AXP2900 from TigerDirect; sat down last night to build it, and got a no-post. Fans spin, CPU fan spins, hard drives spin up, but no beep, and no graphics out. Also, the heatsink doesn't seem to get warm. So I popped the new CPU..

New upgrade wont post VNF3-250 and 3400 cpu - Upgraded my rig and replaced my barton2500/abit nf7-s with socket 754 3400 athlon and vnf3-250 mobo. The rest of the parts are the same from original set up. When I put in the 3400/chaintech and hit the power button the fans spin 2-4 seconds then stop..

Chaintech SKT800T/AMD Athlon 3000+ won't post - I just purchased a Chaintech SKT800T and AMD Athlon 3000+ from MWAVE.COM and have been unable to get the system to post with video card, memory, and PS connected. I sent bundle back to MWAVE and they tested and returned but I still can't get the system....
   Hardware Problem Solving Community! (Home) -> Chaintech All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]