Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

AA8 Duramax Clear CMOS Help

 
   Hardware Problem Solving Community! (Home) -> ABIT RSS
Next:  What to do to resurrect an old KT7-RAID?  
Author Message
Graham Prichard

External


Since: Oct 14, 2004
Posts: 1



(Msg. 1) Posted: Thu Oct 14, 2004 4:57 am
Post subject: AA8 Duramax Clear CMOS Help
Archived from groups: alt>comp>periphs>mainboard>abit (more info?)

Hi
We have completed the full CMOS clear (including removing the battery) and
are now having problems getting past the BIOS stage.

After BIOS (have updated to bios version 15) the error is "load needed DLL's
for kernel".

How can we get beyond this screen?

Thank You
Graham

 >> Stay informed about: AA8 Duramax Clear CMOS Help 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
NF7-S Can't Clear CMOS - Recently I purchased a new sempron2400+ and installed it. The processor wouldn't run, it run for 10 ro 20 seconds and shutdown so I put back the Amd 850GHz processor that I had on the motherboard before the new Sempron, and attempted to save the bios....

AA8 Duramax BIOS - Hi,it's me,the pest,back again.I went through the bios,mainly checking and going by the manual.Everthing seemed to be fine,so i chose "load optomized defaults" and then "save & exit" the red box appears,with a "Y?" flash...

Beep codes to AA8-DuraMax - Hello Can any one tell me where i can find beep codes for an AA8-DuraMax motherboard ?

Abit DuraMAX - ECC/nonECC HELP !! - Hi, I recently bought a new AA8-DuraMAX motherboard ... http://www2.abit.com.tw/page/uk/motherboard/motherboard_detail.php?pMODEL_NAME=AA8-DuraMAX&fMTYPE=LGA775 Unfortunately I failed to notice that it supports : 240-pin DIMM sockets (Un-buffered..

AA8 DuraMax - poor overclock - I purchased this mainboard soon after it was released and fitted it with Corsair XMS2-5400 DDR2 RAM, P4 540 3.2E GHz CPU (D0 stepping), Abit RX600 XT-PCIE graphics card, and Creative Labs Sound Blaster Audigy2 ZS Platinum Pro PCI card. I have 4 x..
   Hardware Problem Solving Community! (Home) -> ABIT All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]