AIW 9800 TV Audio Reverb

Hi Paul:

Not sure how to re-invoke the audio wizard.
When I get that audio reverb I find I need to go to the audio mixer and play
with the pots. Usually two inputs are up and I bring down one and it then
sounds ok.

Hope this is of some help.

Paul Goodman

"Paul Grunwald" <pgrunwald RemoveThis @spamthis.comcast.net> wrote in message
news:Xns94AC8DDD55C02pgrunwaldcomcastnet@216.196.97.136...
 > I just upgraded to Cat 4.3 from 3.10 and from MMC 8.6 to 8.8. Everything
 > seems to be working except that I'm getting a lot of echo/reverb in the
 > audio on the TV. I can't seem to get the Audio Wizard to come up again to
 > change the settings. Display-Initialization Wizard does not bring it up.
 > I'm running WinXP Pro.
 >
 > How can I re-invoke the audio wizard?
 >
 >
 >
 > Thanks,
 > P.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AIW 9800 TV Audio Reverb 

also check the audio drivers for your motherboard. When I updated mine, the
reverb went away.

"Paul" <paulgood.DeleteThis@hotmail.com> wrote in message
news:opEbc.22093$jVF.10032@news04.bloor.is.net.cable.rogers.com...
 > Hi Paul:
 >
 > Not sure how to re-invoke the audio wizard.
 > When I get that audio reverb I find I need to go to the audio mixer and
play
 > with the pots. Usually two inputs are up and I bring down one and it then
 > sounds ok.
 >
 > Hope this is of some help.
 >
 > Paul Goodman
 >
 > "Paul Grunwald" <pgrunwald.DeleteThis@spamthis.comcast.net> wrote in message
 > news:Xns94AC8DDD55C02pgrunwaldcomcastnet@216.196.97.136...
  > > I just upgraded to Cat 4.3 from 3.10 and from MMC 8.6 to 8.8.
Everything
  > > seems to be working except that I'm getting a lot of echo/reverb in the
  > > audio on the TV. I can't seem to get the Audio Wizard to come up again
to
  > > change the settings. Display-Initialization Wizard does not bring it
up.
  > > I'm running WinXP Pro.
  > >
  > > How can I re-invoke the audio wizard?
  > >
  > >
  > >
  > > Thanks,
  > > P.
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AIW 9800 TV Audio Reverb 

yes during delayed TV if the 'wave' and line in' are both enabled
you will get an echo


"Paul" <paulgood.RemoveThis@hotmail.com> wrote in message
news:opEbc.22093$jVF.10032@news04.bloor.is.net.cable.rogers.com...
 > Hi Paul:
 >
 > Not sure how to re-invoke the audio wizard.
 > When I get that audio reverb I find I need to go to the audio mixer
and play
 > with the pots. Usually two inputs are up and I bring down one and
it then
 > sounds ok.
 >
 > Hope this is of some help.
 >
 > Paul Goodman
 >
 > "Paul Grunwald" <pgrunwald.RemoveThis@spamthis.comcast.net> wrote in message
 > news:Xns94AC8DDD55C02pgrunwaldcomcastnet@216.196.97.136...
  > > I just upgraded to Cat 4.3 from 3.10 and from MMC 8.6 to 8.8.
Everything
  > > seems to be working except that I'm getting a lot of echo/reverb
in the
  > > audio on the TV. I can't seem to get the Audio Wizard to come up
again to
  > > change the settings. Display-Initialization Wizard does not bring
it up.
  > > I'm running WinXP Pro.
  > >
  > > How can I re-invoke the audio wizard?
  > >
  > >
  > >
  > > Thanks,
  > > P.
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AIW 9800 TV Audio Reverb