Welcome to HardwareForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

AK-39N still having problems

  
   Hardware Problem Solving Community! (Home) -> Shuttle RSS
Related Topics:
AGP problems with SB61G - Hi...new here. Just setting up a new SB61G and I'm having a real pain trying to install an AGP video card. Tried two, a Radeon 9600 PRO and a Leadtek WinFast A340TD. Both cards crash after drivers are screen just before the log in screen..

AK39N Many Problems with XP - I have some Problems with this MB! The newest Message: What is the Reason for this Error? Can someone tell me? My Config: Athlon XP 2600+, PC3200, ATI Radeon 9000, WD 800BB, 400W Power, The CPU and the Memory are Jumpered with

Problems with SB61G2 - Problem 1 ======= I'm trying to connect to my portable MD recorder using the SPDIF OUT on my SB61G2. All I get is a noise when I switch on the SPDIF OUT. I'm using Win2K SP4. I've tried the - Checked that the optical cable isn't..

New SN85G4, New problems - Having recently conquered my missus' new SN85G4 problems, my first ever shuttle, I decided that having used her as a guinea pig, and not to be outdone, I would follow suit with a brand new shiny small computer. Firstly I will list what went in it, then..

ST62K problems... - Hi, I have set up a Shuttle ST62K wit a 3 GHz P4 2x256 MB Corsair PC3200 also tried with a single Corsair PC3200 512MB) and a Hitachi 7K250 250GB Windows XP is without any trouble, but after the install I..
Next:  Shuttle: SN41G2 and 9800 Pro  
Author Message
Skier

External


Since: Jul 18, 2003
Posts: 49



(Msg. 1) Posted: Sat Nov 15, 2003 10:13 pm
Post subject: AK-39N still having problems
Archived from groups: alt>comp>periphs>mainboard>shuttle (more info?)
Hi,
I am still having trouble with my AK39N. I have a new Enlight Power supply,
new DDR RAM, new 40gig maxtor drive, and new 1.3 Duron proc. I have run the
maxblast software to partition and format. I start the XP install and I get
IRQL_NOT_LESS_OR EQUAL error. I have installed an older ATI Rage pro AGP
card and a 32X Samsung CDR. I had the same error with my older 1.0gig
Athlon proc, so I bought this new Duron proc. Any ideas? Seems to boot
ok. Is there anything in the Bios I need to change or disable to get XP to
load, or anything you think might give XP a hiccup? I have had such good
luck with the many Shuttle Boards I have used back to my old HOT-555 socket
7 board. I have been building PCs for over 10 years and this one has me
stumped. Oh, I also installed the latest BIOS revision too.

Thanks for your help.

Tom

 >> Stay informed about: AK-39N still having problems 
Back to top
Login to vote
Dennis Roark

External


Since: Apr 13, 2004
Posts: 9



(Msg. 2) Posted: Sun Nov 16, 2003 5:14 am
Post subject: Re: AK-39N still having problems [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
[posted and mailed]

"Skier" <geoman39.TakeThisOut@charter.net> wrote in
news:vrdjpao1m8smb7@corp.supernews.com:

 > Hi,
 > I am still having trouble with my AK39N. I have a new Enlight Power
 > supply, new DDR RAM, new 40gig maxtor drive, and new 1.3 Duron proc.
 > I have run the maxblast software to partition and format. I start the
 > XP install and I get IRQL_NOT_LESS_OR EQUAL error. I have installed
 > an older ATI Rage pro AGP card and a 32X Samsung CDR. I had the same
 > error with my older 1.0gig Athlon proc, so I bought this new Duron
 > proc. Any ideas? Seems to boot ok. Is there anything in the Bios I
 > need to change or disable to get XP to load, or anything you think
 > might give XP a hiccup? I have had such good luck with the many
 > Shuttle Boards I have used back to my old HOT-555 socket 7 board. I
 > have been building PCs for over 10 years and this one has me stumped.
 > Oh, I also installed the latest BIOS revision too.
 >
 > Thanks for your help.
 >
 > Tom
 >
 >
 >

Sorry to hear you are still having problems. Do you have any other
cards in there, such as sound card or modem? If so, pull them before
you try to install windows. I once had a PCI modem that would block the
installation of Win XP. Once windows is installed, you can turn off the
PC and install the other cards, they should be recognized. Since you
are getting the same error even as you change out seemingly all the
parts, a modem or sound card that is staying common might be the
explanation. Try to keep the peripherals attached at an absolute
minimum until you get Windows installed. That would include a separate
network card if you use one. If you are not using a USB keyboard or
mouse, also shut down the USB ports in the bios, disable the network
controller in the bios and the built-in sound. Any of these could be
contributing to the conflict. Go bare minimum, everything pulled or
disabled that is not essential to install. Then once installed, you can
start re-enabling these extras. Any case, that is what I would do. Let
us know.

--
Dennis Roark

denro.TakeThisOut@sio.NOSPAMmidco.net
Starting Points:
<a style='text-decoration: underline;' href="http://sio.midco.net/denro/www" target="_blank">http://sio.midco.net/denro/www</a><!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: AK-39N still having problems 
Back to top
Login to vote
David DeCristoforo1

External


Since: Nov 15, 2003
Posts: 30



(Msg. 3) Posted: Sun Nov 16, 2003 5:14 am
Post subject: Re: AK-39N still having problems [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Yes, especally modems. XP being 2K at the core is very stubborn and
balky when an incompatable modem card is present.
DD


"It's easy when you know how..."
Johnny Shines
 >> Stay informed about: AK-39N still having problems 
Back to top
Login to vote
Skier

External


Since: Jul 18, 2003
Posts: 49



(Msg. 4) Posted: Sun Nov 16, 2003 9:43 pm
Post subject: Re: AK-39N still having problems [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
"Skier" <geoman39 RemoveThis @charter.net> wrote in message
news:vrdjpao1m8smb7@corp.supernews.com...
 > Hi,
 > I am still having trouble with my AK39N. I have a new Enlight Power
supply,
 > new DDR RAM, new 40gig maxtor drive, and new 1.3 Duron proc. I have run
the
 > maxblast software to partition and format. I start the XP install and I
get
 > IRQL_NOT_LESS_OR EQUAL error. I have installed an older ATI Rage pro AGP
 > card and a 32X Samsung CDR. I had the same error with my older 1.0gig
 > Athlon proc, so I bought this new Duron proc. Any ideas? Seems to boot
 > ok. Is there anything in the Bios I need to change or disable to get XP
to
 > load, or anything you think might give XP a hiccup? I have had such good
 > luck with the many Shuttle Boards I have used back to my old HOT-555
socket
 > 7 board. I have been building PCs for over 10 years and this one has me
 > stumped. Oh, I also installed the latest BIOS revision too.
 >
 > Thanks for your help.
 >
 > Tom
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AK-39N still having problems 
Back to top
Login to vote
Skier

External


Since: Jul 18, 2003
Posts: 49



(Msg. 5) Posted: Sun Nov 16, 2003 9:43 pm
Post subject: Re: AK-39N still having problems [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Works!

Here is what I did.
1. Installed win98 (no problems), shows that the hardware works.
2. Upgraded to XP, didn't work
3. Changed BIOS to (not PNP OS), turned off all peripherals earlier
(parallel, serial, usb, sound, network)
4. Swapped out RAM
5. Tried upgrade again, got only two more BSOD, but different
6. Then got lots of copy errors while installing XP, had to go to other
computer to find all the missing .dll files
7. It finished! And it has been running fairly steady so far.
8 Installed latest 4in1 from Via
9 Installing the latest updates from microsoft now.

I will try installing my Soundblaster Live 5.1 next after turning off
onboard sound.
Then lastly the modem.

Thanks for your help on this thread and previous ones.

Tom


"Skier" <geoman39.DeleteThis@charter.net> wrote in message
news:vrdjpao1m8smb7@corp.supernews.com...
 > Hi,
 > I am still having trouble with my AK39N. I have a new Enlight Power
supply,
 > new DDR RAM, new 40gig maxtor drive, and new 1.3 Duron proc. I have run
the
 > maxblast software to partition and format. I start the XP install and I
get
 > IRQL_NOT_LESS_OR EQUAL error. I have installed an older ATI Rage pro AGP
 > card and a 32X Samsung CDR. I had the same error with my older 1.0gig
 > Athlon proc, so I bought this new Duron proc. Any ideas? Seems to boot
 > ok. Is there anything in the Bios I need to change or disable to get XP
to
 > load, or anything you think might give XP a hiccup? I have had such good
 > luck with the many Shuttle Boards I have used back to my old HOT-555
socket
 > 7 board. I have been building PCs for over 10 years and this one has me
 > stumped. Oh, I also installed the latest BIOS revision too.
 >
 > Thanks for your help.
 >
 > Tom
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AK-39N still having problems 
Back to top
Login to vote
Dennis Roark

External


Since: Apr 13, 2004
Posts: 9



(Msg. 6) Posted: Tue Nov 18, 2003 8:41 am
Post subject: Re: AK-39N still having problems [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
"Skier" <geoman39.TakeThisOut@charter.net> wrote in
news:vrg6dmaf00oib4@corp.supernews.com:

 > Works!
 >
 > Here is what I did.
 >
 > 6. Then got lots of copy errors while installing XP, had to go to
 > other computer to find all the missing .dll files
 > 7. It finished! And it has been running fairly steady so far.
 >

Hmm... That is the first you mentioned of many copy errors. You may
have either a bad Win XP disk (I've seen them before) or a faulty or
dirty CD drive. Perhaps this has been the problem all along and that
some file(s) were not being properly copied. If you have Nero, then you
can check to see if the cd drive is properly reading you win xp disk by
using Nero CD Speed. You can use the Extra menu and run the scan disk.


--
Dennis Roark

denro.TakeThisOut@sio.NOSPAMmidco.net
Starting Points:
<a style='text-decoration: underline;' href="http://sio.midco.net/denro/www" target="_blank">http://sio.midco.net/denro/www</a><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AK-39N still having problems 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> Shuttle All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]