AK86-L work with 3700 ?

FAQ

Profile

AK86-L work with 3700 ?

Hardware Problem Solving Community! (Home) -> AOPEN

Next: Overclock question...

Author

Message

joe15

External

Since: Jun 17, 2004
Posts: 4

(Msg. 1) Posted: Sat Nov 26, 2005 2:08 pm
Post subject: AK86-L work with 3700 ?
Archived from groups: alt>comp>periphs>mainboard>aopen (more info?)

Was thinking of putting a AMD athlon64 3700 in a AK86-L.
Was wondering if there were any bios problems doing this.
I recall the later bios revisions screwed up the memory bus speeds.
I'm using bios 1.11 which runs at full speed, but I'm wondering if it
will recognize the 754 3700.

>> Stay informed about: AK86-L work with 3700 ?

Display posts from previous:

Related Topics:

Will a AK86-L take a moble Athlon? - I would like to upgrade my 3000+ to a 3700+, but all I can find are the moble chips. Will they work on my mobo? TIA

AK86-L Best slot for Promise ide controller card - Want to put a Promise Ultra100TX2 standard IDE controller card into an Aopen AK86-L motherboard. Don't have any SATA drives, and I want a little more flexibility in mounting hard drives and optical drives. Vaguely recall issues with which ide slot..

cannot get onboard sound to work - I have a new Aopen AX45-4D Max motherboard with the Realtek AC97 audio built in. I installed the driver for it that was on the CD that came with the board, everything looks ok in device manager, but I cannot get any sound. No conflicts and when I go to..

XP SP2 doesn't work on AX4SG Max motherboard - Just did another test: Installed XP (no SP) on my Shuttle (FV25) and then went direct to XP SP2 - all works perfectly. Therefore, the problem seems to be with AOpen's AX4SG Max motherboard, and/or BIOS and XP SP2. "Gulliver" <jswift909@cl...

AX4SPE - can't get RAID to work - I have a standard AX4SPE board (not MAX or MAX II). I'm trying to get two Maxtor 120Gb SATA drives to operate in RAID mode. However, when I set the SATA devices to 'RAID' in the BIOS it then fails to detect the drives. If I let it boot to the RAID..

	Hardware Problem Solving Community! (Home) -> AOPEN	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum