AN35-N and power to PS/2 while off

Hi-

When powered off, this Shuttle AN35-N has power to
the keyboard, and the numlock LED is on. I have heard
others mention that their "optical" mice LEDs stay on. I
see that there are some BIOS options for PS/2 mouse,
keyboard, hotkey power on. Does any combination of
these settings completely disable power to the PS/2 ports?
I really don't mind pushing the button.

I'd experiment, but I took-out my cheap RAM that won't
even run at 200 MHz to swap for some good stuff. Thanks
for any help!

FF

"Fishface" <invalid.TakeThisOut@ddress.ok?> wrote in message
news:vkk75htkl2om7c@corp.supernews.com...
 > Hi-
 >
 > When powered off, this Shuttle AN35-N has power to
 > the keyboard, and the numlock LED is on. I have heard
 > others mention that their "optical" mice LEDs stay on. I
 > see that there are some BIOS options for PS/2 mouse,
 > keyboard, hotkey power on. Does any combination of
 > these settings completely disable power to the PS/2 ports?
 > I really don't mind pushing the button.
 >
 > I'd experiment, but I took-out my cheap RAM that won't
 > even run at 200 MHz to swap for some good stuff. Thanks
 > for any help!
 >
 > FF
 >
 >
The settings are to be found in the "Power Management Setup" of the BIOS.
You can shut off the keyboard for sure and maybe the mouse.

This is a GREAT board!
Shuttle AN35N/XP2100 T'bred FSB200 x 10 (2000MHz) Core voltage 1.650

512MB Legend PC3200 set at 100%
WIN XP Pro SP1
Antec SX-835
Vantec Aeroflow 7040 w/ Arctic Silver Ceramique
LiteOn 48x24x48
Maxtor 80GB/Sony FD/Zip 250 USB (external)
Mad Dog GeForce4 MX440 AGP8x
On Board LAN and AC'97 sound
Intel 56k voice fax modem
2x 80mm exhaust fans/System 28C / CPU socket 33C / CPU 34C/ room temp 77F<!-- ~MESSAGE_AFTER~ -->