Welcome to HardwareForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

AN35N-Ultra - RAM not recognized

  
   Hardware Problem Solving Community! (Home) -> Shuttle RSS
Related Topics:
AN35N Ultra - I recently bought 2 AN35N Ultra boards. When they post and I attempt to enter the bios setup by pressing the delete key, nothing happens for 20-30 seconds and then it enters the bios setup. Also, it has the same delay when it attempts to identify the ide.

AN35N Ultra - Hi @ all, first please excuse my bad english, i'm from Germany. ;-) I'm using a Shuttle AN35N Ultra and an Barton XP 2500+. I've tried to Overclock by setting the FSB to 200MHz and 1.750 Vcore. Runs nearly a Minute as 3200+ and then shuts down with the.

Got The AN35n ultra - What's next? - My trustly ol AK35GT went into cardiac arrest after I upgraded the BIOS (or at least tried to--!!) . So, I just puchased the AN35N Ultra to replace it. The system will have little game use, but will be used mostly for burning DVDs and some

AN35N Ultra does not support DOS DMA - AN35N Ultra does not support DOS DMA, which is necessary to run Ghost or PQDI at a decent disk speed. fwiw! hth -- Kristi Shuttle AN35N Ultra, XP1700 Tbred A 168x11 1.848gHz, WinXP pro SP1(SP2), GeF3 Ti200, DX9.0b, 512mb @336

AN35N Ultra and SCSI - Any ideas why all of my drives show up as SCSI in XP pro and AN35N Ultra? I have a cd and dvd burner and a 200 GB hdd hooked up to the 2 IDE on my Device manage in XP shows them as scsi and nothing under IDE ATA/ Atapi..
Next:  Shuttle: TV Card for Shuttle XPC Zen ST62K  
Author Message
nickolas80

External


Since: Nov 30, 2005
Posts: 12



(Msg. 1) Posted: Mon Dec 19, 2005 12:35 pm
Post subject: AN35N-Ultra - RAM not recognized
Archived from groups: alt>comp>periphs>mainboard>shuttle (more info?)
I just upgraded my CPU from a XP1600 to a XP 2800. I also upgraded to
333 fsb. In doing so, my memory went from 1gb (using all three slots)
to only the system only showing 768mb.

Any ideas on this?

 >> Stay informed about: AN35N-Ultra - RAM not recognized 
Back to top
Login to vote
Paul J. Veres

External


Since: Jan 01, 2004
Posts: 20



(Msg. 2) Posted: Mon Dec 26, 2005 12:55 am
Post subject: Re: AN35N-Ultra - RAM not recognized [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
I have this same board & I use nothing but OCZ premier or performance ram
and it shows the proper amount. When I got the board, Shuttle told me it
works best with premium brands of ram.



<nickolas80.TakeThisOut@gmail.com> wrote in message
news:1135024512.028906.131060@g43g2000cwa.googlegroups.com...
>I just upgraded my CPU from a XP1600 to a XP 2800. I also upgraded to
> 333 fsb. In doing so, my memory went from 1gb (using all three slots)
> to only the system only showing 768mb.
>
> Any ideas on this?
>
>

 >> Stay informed about: AN35N-Ultra - RAM not recognized 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> Shuttle All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]