AN7 - POST code AF ?

I have the same problem.

I think it may be a memory issue, since when I underclock my memory,
the issue goes away. I've just emailed ABit to ask.



On Fri, 30 Jul 2004 22:41:20 -0500, Vmax <anyone DeleteThis @anywhere.com> wrote:

 >I'm unable to get my newly installed AN7 board to POST.
 >
 >The visible hex post code readout when the failure occurs is "AF",
 >which not listed in the in the appendix of the owners manual. Does
 >anyone know what this means ?
 >
 >I'm using an Enermax 350W power supply. Is this insufficient to to
 >run an AN7 ?
 >
 >The audible POST code is a series of long beeps. I've checked the
 >video card (Radeon 9200) and memory ( 2 sticks of 512M Crucial DDR400)
 >in another computer, and they're OK.
 >
 >Thanks.
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AN7 - POST code AF ? 

I go along with those who say a memory problem. I had the 'AF' code on mine
and I re-seated the memory and it went away. I was "positive" that I had
properly seated the memory the first time, but being "positive" didn't
really mean anything. It was not seated right and this may be your problem.

DDDD

"Dinjiin" <dev.null@localhost> wrote in message
news:er9km0dr6e7rvtck9khgf66nlfl72fir5g@4ax.com...
 >I have the same problem.
 >
 > I think it may be a memory issue, since when I underclock my memory,
 > the issue goes away. I've just emailed ABit to ask.
 >
 >
 >
 > On Fri, 30 Jul 2004 22:41:20 -0500, Vmax <anyone.RemoveThis@anywhere.com> wrote:
 >
  >>I'm unable to get my newly installed AN7 board to POST.
  >>
  >>The visible hex post code readout when the failure occurs is "AF",
  >>which not listed in the in the appendix of the owners manual. Does
  >>anyone know what this means ?
  >>
  >>I'm using an Enermax 350W power supply. Is this insufficient to to
  >>run an AN7 ?
  >>
  >>The audible POST code is a series of long beeps. I've checked the
  >>video card (Radeon 9200) and memory ( 2 sticks of 512M Crucial DDR400)
  >>in another computer, and they're OK.
  >>
  >>Thanks.
  >>
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AN7 - POST code AF ? 

I think I may have a more sinister issue.

When I had my Thunderbird/700 in my machine, I was running my memory
bus at 425MHz. One day while changing my latency settings from
2:3:3:8 to 2:3:2:6 (I had them lowered due to the O/C), the system
failed to boot.

Ever since, I have had to run my memory at 2:3:3:8 with a 380MHz
memory bus, even now with my XP/2800. If I run only one stick of
memory, I can push 385MHz, but nothing more. Otherwise, the system
just boots with "AF" code.



On Mon, 11 Oct 2004 11:28:01 -0400, "DDDD" <someone DeleteThis @some.one> wrote:

 >I go along with those who say a memory problem. I had the 'AF' code on mine
 >and I re-seated the memory and it went away. I was "positive" that I had
 >properly seated the memory the first time, but being "positive" didn't
 >really mean anything. It was not seated right and this may be your problem.
 >
 >DDDD
 >
 >"Dinjiin" <dev.null@localhost> wrote in message
 >news:er9km0dr6e7rvtck9khgf66nlfl72fir5g@4ax.com...
  >>I have the same problem.
  >>
  >> I think it may be a memory issue, since when I underclock my memory,
  >> the issue goes away. I've just emailed ABit to ask.
  >>
  >>
  >>
  >> On Fri, 30 Jul 2004 22:41:20 -0500, Vmax <anyone DeleteThis @anywhere.com> wrote:
  >>
   >>>I'm unable to get my newly installed AN7 board to POST.
   >>>
   >>>The visible hex post code readout when the failure occurs is "AF",
   >>>which not listed in the in the appendix of the owners manual. Does
   >>>anyone know what this means ?
   >>>
   >>>I'm using an Enermax 350W power supply. Is this insufficient to to
   >>>run an AN7 ?
   >>>
   >>>The audible POST code is a series of long beeps. I've checked the
   >>>video card (Radeon 9200) and memory ( 2 sticks of 512M Crucial DDR400)
   >>>in another computer, and they're OK.
   >>>
   >>>Thanks.
   >>>
  >>
  >>
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AN7 - POST code AF ? 

I got the same code and a memory re-seat fixed it for me too...

T.
"DDDD" <someone RemoveThis @some.one> wrote in message
news:b28d5$416aa655$45234c0d$32162@allthenewsgroups.com...
 >I go along with those who say a memory problem. I had the 'AF' code on
 >mine and I re-seated the memory and it went away. I was "positive" that I
 >had properly seated the memory the first time, but being "positive" didn't
 >really mean anything. It was not seated right and this may be your
 >problem.
 >
 > DDDD
 >
 > "Dinjiin" <dev.null@localhost> wrote in message
 > news:er9km0dr6e7rvtck9khgf66nlfl72fir5g@4ax.com...
  >>I have the same problem.
  >>
  >> I think it may be a memory issue, since when I underclock my memory,
  >> the issue goes away. I've just emailed ABit to ask.
  >>
  >>
  >>
  >> On Fri, 30 Jul 2004 22:41:20 -0500, Vmax <anyone RemoveThis @anywhere.com> wrote:
  >>
   >>>I'm unable to get my newly installed AN7 board to POST.
   >>>
   >>>The visible hex post code readout when the failure occurs is "AF",
   >>>which not listed in the in the appendix of the owners manual. Does
   >>>anyone know what this means ?
   >>>
   >>>I'm using an Enermax 350W power supply. Is this insufficient to to
   >>>run an AN7 ?
   >>>
   >>>The audible POST code is a series of long beeps. I've checked the
   >>>video card (Radeon 9200) and memory ( 2 sticks of 512M Crucial DDR400)
   >>>in another computer, and they're OK.
   >>>
   >>>Thanks.
   >>>
  >>
  >>
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AN7 - POST code AF ?