 |
|
|
|
Next: Aopen + boot from old ide disk, sata later added
|
| Author |
Message |
External
Since: Jul 05, 2005
Posts: 4
|
(Msg. 1) Posted: Tue Jul 05, 2005 2:55 pm
Post subject: Aopen AX4PE Max - added a sata disk but want to keep booting from old IDE disk
Archived from groups: alt>comp>periphs>mainboard>aopen (more info?)
|
|
|
Hi,
I have a system with a Aopen AX4PE Max mainboard. The system was build on 2
IDE harddisk connected to the yellow cable.
Now I like to add a third disk, a SATA as an extra data disk.
I want to have it boot from the IDE Primary master, the old one. But I get
boot-erros while it is trying to boot from the SATA disk.
Please help,
Gert |
|
| Back to top |
|
 | |
External
Since: Mar 04, 2004
Posts: 5
|
(Msg. 2) Posted: Tue Jul 05, 2005 3:55 pm
Post subject: Re: Aopen AX4PE Max - added a sata disk but want to keep booting from old IDE di [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Check that the boot order in BIOS is set correctly to boot in the order you
want. It is possible that defaults are trying to get it to boot from SATA
first. This isn't a problem without one, it just moves on to the next boot
device. You can download a manual by following links from www.aopen.com.
Al Reeve
"gce" <gceng2 RemoveThis @hotmail.com> wrote in message
news:daeg3g$clk$1@news3.zwoll1.ov.home.nl...
> Hi,
>
> I have a system with a Aopen AX4PE Max mainboard. The system was build on
> 2
> IDE harddisk connected to the yellow cable.
>
> Now I like to add a third disk, a SATA as an extra data disk.
> I want to have it boot from the IDE Primary master, the old one. But I get
> boot-erros while it is trying to boot from the SATA disk.
>
> Please help,
> Gert
>
>
>
> |
|
| Back to top |
|
| |
External
Since: Jul 05, 2005
Posts: 4
|
(Msg. 3) Posted: Tue Jul 05, 2005 4:55 pm
Post subject: Re: Aopen AX4PE Max - added a sata disk but want to keep booting from old IDE di [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
To be precise:
IDE1-M : startup XP OS
IDE1-S : second harddisk
But the promise bios at startup gives now:
D0: new sata disk
D1: first ide disk
D2: second ide disk
The boot order I try to set is that first boot device is C:
But it still gives a boot failure and doesn't try the IDE1-M
"Al Reeve" <al.r.TakeThisOut@btinternet.com> schreef in bericht
news:daelhj$cfj$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com...
> Check that the boot order in BIOS is set correctly to boot in the order
> you want. It is possible that defaults are trying to get it to boot from
> SATA first. This isn't a problem without one, it just moves on to the
> next boot device. You can download a manual by following links from
> www.aopen.com.
>
> Al Reeve
>
> "gce" <gceng2.TakeThisOut@hotmail.com> wrote in message
> news:daeg3g$clk$1@news3.zwoll1.ov.home.nl...
>> Hi,
>>
>> I have a system with a Aopen AX4PE Max mainboard. The system was build on
>> 2
>> IDE harddisk connected to the yellow cable.
>>
>> Now I like to add a third disk, a SATA as an extra data disk.
>> I want to have it boot from the IDE Primary master, the old one. But I
>> get boot-erros while it is trying to boot from the SATA disk.
>>
>> Please help,
>> Gert
>>
>>
>>
>>
>
> >> Stay informed about: Aopen AX4PE Max - added a sata disk but want to keep booti.. |
|
| Back to top |
|
| |
External
Since: Mar 04, 2004
Posts: 5
|
(Msg. 4) Posted: Tue Jul 05, 2005 7:55 pm
Post subject: Re: Aopen AX4PE Max - added a sata disk but want to keep booting from old IDE di [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Had another look, the yellow IDE connector and SATA use the same controller,
try your IDE drives on the Blue connector. I seem to remember that you cant
use the SATA and Promise controller at the same time.
Al Reeve
"gce" <gceng2.DeleteThis@hotmail.com> wrote in message
news:daena4$3ki$1@news2.zwoll1.ov.home.nl...
> To be precise:
>
> IDE1-M : startup XP OS
> IDE1-S : second harddisk
>
> But the promise bios at startup gives now:
>
> D0: new sata disk
> D1: first ide disk
> D2: second ide disk
>
> The boot order I try to set is that first boot device is C:
>
> But it still gives a boot failure and doesn't try the IDE1-M
>
> "Al Reeve" <al.r.DeleteThis@btinternet.com> schreef in bericht
> news:daelhj$cfj$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com...
>> Check that the boot order in BIOS is set correctly to boot in the order
>> you want. It is possible that defaults are trying to get it to boot from
>> SATA first. This isn't a problem without one, it just moves on to the
>> next boot device. You can download a manual by following links from
>> www.aopen.com.
>>
>> Al Reeve
>>
>> "gce" <gceng2.DeleteThis@hotmail.com> wrote in message
>> news:daeg3g$clk$1@news3.zwoll1.ov.home.nl...
>>> Hi,
>>>
>>> I have a system with a Aopen AX4PE Max mainboard. The system was build
>>> on 2
>>> IDE harddisk connected to the yellow cable.
>>>
>>> Now I like to add a third disk, a SATA as an extra data disk.
>>> I want to have it boot from the IDE Primary master, the old one. But I
>>> get boot-erros while it is trying to boot from the SATA disk.
>>>
>>> Please help,
>>> Gert
>>>
>>>
>>>
>>>
>>
>>
>
> >> Stay informed about: Aopen AX4PE Max - added a sata disk but want to keep booti.. |
|
| Back to top |
|
| |
External
Since: Apr 07, 2004
Posts: 231
|
(Msg. 5) Posted: Tue Jul 05, 2005 9:55 pm
Post subject: Re: Aopen AX4PE Max - added a sata disk but want to keep booting from old IDE di [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Have you tried booting from D 
On Tue, 5 Jul 2005 21:30:00 +0200, "gce" <gceng2 DeleteThis @hotmail.com> wrote:
>To be precise:
>
>IDE1-M : startup XP OS
>IDE1-S : second harddisk
>
>But the promise bios at startup gives now:
>
>D0: new sata disk
>D1: first ide disk
>D2: second ide disk
>
>The boot order I try to set is that first boot device is C:
>
>But it still gives a boot failure and doesn't try the IDE1-M
>
>"Al Reeve" <al.r DeleteThis @btinternet.com> schreef in bericht
>news:daelhj$cfj$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com...
>> Check that the boot order in BIOS is set correctly to boot in the order
>> you want. It is possible that defaults are trying to get it to boot from
>> SATA first. This isn't a problem without one, it just moves on to the
>> next boot device. You can download a manual by following links from
>> www.aopen.com.
>>
>> Al Reeve
>>
>> "gce" <gceng2 DeleteThis @hotmail.com> wrote in message
>> news:daeg3g$clk$1@news3.zwoll1.ov.home.nl...
>>> Hi,
>>>
>>> I have a system with a Aopen AX4PE Max mainboard. The system was build on
>>> 2
>>> IDE harddisk connected to the yellow cable.
>>>
>>> Now I like to add a third disk, a SATA as an extra data disk.
>>> I want to have it boot from the IDE Primary master, the old one. But I
>>> get boot-erros while it is trying to boot from the SATA disk.
>>>
>>> Please help,
>>> Gert
>>>
>>>
>>>
>>>
>>
>>
> >> Stay informed about: Aopen AX4PE Max - added a sata disk but want to keep booti.. |
|
| Back to top |
|
| |
| Related Topics: | 48bit LBA Hard Disk works with Aopen MB? - Hi, I have a Win98 system on a Aopen AK73(A) Motherboard. I have a new 160GB ATA100 hard disk. I updated BIOS firmware to version 1.20. I have installed latest VIA 4in1 drivers v.4.37V(A). Now both BIOS and Win98 drivers should be ok for 48bit LBA disks...
AX6B Plus won't boot with SMC2802W PCI card added - Hi, I have had some problems recently with new PCI cards when I add them to my Aopen AXBP Plus mobo. The system won't boot with tha PCI card inserted. I have had this with 2 Wireless network cards: Linksys WMP54G SMS SMC2802W I have read something..
AOPEN AW 540 - HELLO With the latest mainboards (intel i865PE), it's impossible to use the driver windowsXP with the AOPEN AW 540 (FM801), it's a pity because it's now impossible to have a real home cinema 5.1. someone have the same problem ? sorry for my bad..
CPU for AOpen AX4BS Pro - I have an AOpen AX4BS Pro motherboard. The spec is: CPU : Intel Pentium 4 CPU, 400MHz (Northwood) Chipset : Intel 845S, Intel ICH2 Main Memory : SDRAM DIMM x 3 Does this mean that a 533MHz CPU will not work? Can anyone suggest what I have to..
Ati AIW 9000 Pro and Aopen ak77-8xn - I have an Ati All In Wonder 9000 Pro and an Aopen Ak77-8xn motherboard with 512 meg Ram, AMD 2500. When I try to set up the tv tuner, it will go through the setup until it shows the first screen of the tv for 1 sec then disappears. When you click on the.... |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Profile
Private Messages
Log in
