AX4SPE Max Power up problem

External Since: Oct 09, 2003 Posts: 1

I'm installing the new board with P4 2.80 ghz processor and have been unable
to get the system to powerup. I've tried all the normal things; check
cables and connection, etc. but only get the amber light on the mainboard.
Does anyone have a suggestion.

J. Gaultney

External Since: Oct 02, 2003 Posts: 3

"Jerry Gaultney" <gaultney.RemoveThis@covad.net> skrev i meddelandet
news:bm5843$qf2$1@sun-news.laserlink.net...
> I'm installing the new board with P4 2.80 ghz processor and have been
unable
> to get the system to powerup. I've tried all the normal things; check
> cables and connection, etc. but only get the amber light on the mainboard.
> Does anyone have a suggestion.
>
> J. Gaultney
>
>
Make sure you have a pentium 4 compatible power supply (two power
connectors) with at least 300 W output . Then try removing one device
/cable at the time until only the cpu,cpu fan cable and the power button
cable remains , If it still refuses to boot it's RMA time .
Good luck
/ the finn