Welcome to HardwareForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

AX6BC squealing

  
   Hardware Problem Solving Community! (Home) -> AOPEN RSS
Related Topics:
AX6BC - ATA/66 - Hi, Does anyone know how to enable ATA/66 on the AX6BC? I've got an ATA/66 hard drive, and an ATA/66 cable, but the computer shows the drive is running in UDMA/33 mode still. Anyone have any ideas?

AX6BC CPU Upgrade - Hey, I have an AX6BC and am trying to find out if I can upgrade the CPU. I have a Celeron 766 FC-PGA CPU here that I'd like to use. If I get a Slot 1 to Socket 370 will that allow me to use the Celeron 766 on the AX6BC? The..

Adding RAM to AX6BC - Hi, I have a system with an AOpen AX6BC presently fitted with 128 MB of PC100 SDRAM as a single DIMM. I want to increase the amount of RAM and can only get 256 MB DIMMs of PC133 SDRAM. Can the two types (PC100 and PC133) be mixed of should I..

AX6BC & WinXP - Hoping you guys can help. Trying to run WinXP (already installed on HDD) on my AX6BC m/board (BIOS ver 2.59), yet when would normally get to the black WinXP loading screen, a blue screen flashes up for half a sec, then the system reboots (don't even get..

AX6BC - UPGRADE 1.3 TO 1.4 - Hiya I wonder if it is worth upgrade from my Celeron 1.3 to 1.4. ? How much improve ? I admit these over 1 GHz are now almost outdated. There are incoming more and more new powerful games like DOOM 3, HLF 2 etc which required run over 3 GHz. i think it.
Author Message
Matt K

External


Since: Jul 11, 2003
Posts: 1



(Msg. 1) Posted: Sat Jul 12, 2003 1:59 am
Post subject: AX6BC squealing
Archived from groups: alt>comp>periphs>mainboard>aopen (more info?)
I bought a used AX6BC motherboard and it's making a high-pitched noise. The
noise seems to be coming from behind the CPU or possibly right in front of
it. It happens whether I have a Celeron 500 or a 600 overclocked to 900 in
it. The noise is different depending on which cpu is in it and what it's
doing. Neither CPU creates a noise when it's idle. The C500 has a sort of
pulsing noise when running Prime95 and a more steady tone when doing other
stuff. The C600@900 makes no noise when running Prime95 but makes a steady
tone just like the 500 when doing other stuff. It's not a coppermine
approved lot and I was wondering if it might have been damaged from running
a Celeron 600@900 in it. I've never heard of a motherboard making noises
before.

I have a couple of wav's of the noise but I don't know what the policy on
posting binaries is for this group. If someone tells me whether it's ok or
not I'll post them. Rar'ed they're about 350k.

 >> Stay informed about: AX6BC squealing 
Back to top
Login to vote
Dwood

External


Since: Jul 14, 2003
Posts: 3



(Msg. 2) Posted: Mon Jul 14, 2003 4:07 am
Post subject: Re: AX6BC squealing [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
reinstall the cpu properly or youll burn it!!




"Matt K" <nobody.TakeThisOut@nothing.com> wrote in message
news:tbScndANo9HqRI2iXTWJhw@veiinternet.net...
 > I bought a used AX6BC motherboard and it's making a high-pitched noise.
The
 > noise seems to be coming from behind the CPU or possibly right in front of
 > it. It happens whether I have a Celeron 500 or a 600 overclocked to 900
in
 > it. The noise is different depending on which cpu is in it and what it's
 > doing. Neither CPU creates a noise when it's idle. The C500 has a sort
of
 > pulsing noise when running Prime95 and a more steady tone when doing other
 > stuff. The C600@900 makes no noise when running Prime95 but makes a
steady
 > tone just like the 500 when doing other stuff. It's not a coppermine
 > approved lot and I was wondering if it might have been damaged from
running
 > a Celeron 600@900 in it. I've never heard of a motherboard making noises
 > before.
 >
 > I have a couple of wav's of the noise but I don't know what the policy on
 > posting binaries is for this group. If someone tells me whether it's ok
or
 > not I'll post them. Rar'ed they're about 350k.
 >
 ><!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: AX6BC squealing 
Back to top
Login to vote
MattK

External


Since: Jul 16, 2003
Posts: 5



(Msg. 3) Posted: Wed Jul 16, 2003 8:01 pm
Post subject: Re: AX6BC squealing [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
"Dwood" <reynold_t.RemoveThis@yahoo.com> wrote in
news:3nnQa.14040$Kw1.3168@nwrdny02.gnilink.net:

 > reinstall the cpu properly or youll burn it!!
 >

There is nothing wrong with how the cpu is installed.

 >
 >
 >
 > "Matt K" <nobody.RemoveThis@nothing.com> wrote in message
 > news:tbScndANo9HqRI2iXTWJhw@veiinternet.net...
  >> I bought a used AX6BC motherboard and it's making a high-pitched
  >> noise.
 > The
  >> noise seems to be coming from behind the CPU or possibly right in
  >> front of it. It happens whether I have a Celeron 500 or a 600
  >> overclocked to 900
 > in
  >> it. The noise is different depending on which cpu is in it and what
  >> it's doing. Neither CPU creates a noise when it's idle. The C500
  >> has a sort
 > of
  >> pulsing noise when running Prime95 and a more steady tone when doing
  >> other stuff. The C600@900 makes no noise when running Prime95 but
  >> makes a
 > steady
  >> tone just like the 500 when doing other stuff. It's not a coppermine
  >> approved lot and I was wondering if it might have been damaged from
 > running
  >> a Celeron 600@900 in it. I've never heard of a motherboard making
  >> noises before.
  >>
  >> I have a couple of wav's of the noise but I don't know what the
  >> policy on posting binaries is for this group. If someone tells me
  >> whether it's ok
 > or
  >> not I'll post them. Rar'ed they're about 350k.
  >>
  >>
 >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AX6BC squealing 
Back to top
Login to vote
Skier

External


Since: Jul 18, 2003
Posts: 49



(Msg. 4) Posted: Sat Jul 19, 2003 2:24 am
Post subject: Re: AX6BC squealing [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Capacitors in camera flashes make a squealing noise when charging. I expect
it is from one of the larger Capacitors that are found around the CPU. Not
100% sure, but I know that capacitors can squeal.

Tom


"MattK" <gooberslot DeleteThis @softDIESPAMhome.net> wrote in message
news:Xns93BAAD1D87715goobywoobyshnooby@206.127.4.21...
 > "Dwood" <reynold_t DeleteThis @yahoo.com> wrote in
 > news:3nnQa.14040$Kw1.3168@nwrdny02.gnilink.net:
 >
  > > reinstall the cpu properly or youll burn it!!
  > >
 >
 > There is nothing wrong with how the cpu is installed.
 >
  > >
  > >
  > >
  > > "Matt K" <nobody DeleteThis @nothing.com> wrote in message
  > > news:tbScndANo9HqRI2iXTWJhw@veiinternet.net...
   > >> I bought a used AX6BC motherboard and it's making a high-pitched
   > >> noise.
  > > The
   > >> noise seems to be coming from behind the CPU or possibly right in
   > >> front of it. It happens whether I have a Celeron 500 or a 600
   > >> overclocked to 900
  > > in
   > >> it. The noise is different depending on which cpu is in it and what
   > >> it's doing. Neither CPU creates a noise when it's idle. The C500
   > >> has a sort
  > > of
   > >> pulsing noise when running Prime95 and a more steady tone when doing
   > >> other stuff. The C600@900 makes no noise when running Prime95 but
   > >> makes a
  > > steady
   > >> tone just like the 500 when doing other stuff. It's not a coppermine
   > >> approved lot and I was wondering if it might have been damaged from
  > > running
   > >> a Celeron 600@900 in it. I've never heard of a motherboard making
   > >> noises before.
   > >>
   > >> I have a couple of wav's of the noise but I don't know what the
   > >> policy on posting binaries is for this group. If someone tells me
   > >> whether it's ok
  > > or
   > >> not I'll post them. Rar'ed they're about 350k.
   > >>
   > >>
  > >
  > >
  > >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AX6BC squealing 
Back to top
Login to vote
Greg11

External


Since: Jul 19, 2003
Posts: 1



(Msg. 5) Posted: Sat Jul 19, 2003 9:56 am
Post subject: Re: AX6BC squealing [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Just a guess but the power regulators onboard the motherboard are a switch
mode style and I suspect what you are hearing are the wire wound inductor
cores whining when they are being loaded up by the cpu. Overclocking would
probably make the noise worse as the cpu would load the power supply even
more.

Gp

"Matt K" <nobody.RemoveThis@nothing.com> wrote in message
news:tbScndANo9HqRI2iXTWJhw@veiinternet.net...
 > I bought a used AX6BC motherboard and it's making a high-pitched noise.
The
 > noise seems to be coming from behind the CPU or possibly right in front of
 > it. It happens whether I have a Celeron 500 or a 600 overclocked to 900
in
 > it. The noise is different depending on which cpu is in it and what it's
 > doing. Neither CPU creates a noise when it's idle. The C500 has a sort
of
 > pulsing noise when running Prime95 and a more steady tone when doing other
 > stuff. The C600@900 makes no noise when running Prime95 but makes a
steady
 > tone just like the 500 when doing other stuff. It's not a coppermine
 > approved lot and I was wondering if it might have been damaged from
running
 > a Celeron 600@900 in it. I've never heard of a motherboard making noises
 > before.
 >
 > I have a couple of wav's of the noise but I don't know what the policy on
 > posting binaries is for this group. If someone tells me whether it's ok
or
 > not I'll post them. Rar'ed they're about 350k.
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AX6BC squealing 
Back to top
Login to vote
tester1

External


Since: Jul 20, 2003
Posts: 2



(Msg. 6) Posted: Sun Jul 20, 2003 9:48 pm
Post subject: Re: AX6BC squealing [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
test

"Greg" <GregP.RemoveThis@nospam.nospam.bigpond.com> wrote:

 >Just a guess but the power regulators onboard the motherboard are a switch
 >mode style and I suspect what you are hearing are the wire wound inductor
 >cores whining when they are being loaded up by the cpu. Overclocking would
 >probably make the noise worse as the cpu would load the power supply even
 >more.
 >
 >Gp
 >
 >"Matt K" <nobody.RemoveThis@nothing.com> wrote in message
 >news:tbScndANo9HqRI2iXTWJhw@veiinternet.net...
  >> I bought a used AX6BC motherboard and it's making a high-pitched noise.
 >The
  >> noise seems to be coming from behind the CPU or possibly right in front of
  >> it. It happens whether I have a Celeron 500 or a 600 overclocked to 900
 >in
  >> it. The noise is different depending on which cpu is in it and what it's
  >> doing. Neither CPU creates a noise when it's idle. The C500 has a sort
 >of
  >> pulsing noise when running Prime95 and a more steady tone when doing other
  >> stuff. The C600@900 makes no noise when running Prime95 but makes a
 >steady
  >> tone just like the 500 when doing other stuff. It's not a coppermine
  >> approved lot and I was wondering if it might have been damaged from
 >running
  >> a Celeron 600@900 in it. I've never heard of a motherboard making noises
  >> before.
  >>
  >> I have a couple of wav's of the noise but I don't know what the policy on
  >> posting binaries is for this group. If someone tells me whether it's ok
 >or
  >> not I'll post them. Rar'ed they're about 350k.
  >>
  >>
 >

e-mail: marc_serafino.RemoveThis@yahoo.com<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: AX6BC squealing 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> AOPEN All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]