(Msg. 1) Posted: Sun Jun 25, 2006 1:37 am
Post subject: Additional HD Archived from groups: comp>sys>ibm>pc>hardware>storage (more info?)
I have a Compaq Presario Desktop 6330US with a 2.0 ghz proc. & a
60 GB HD. I just got a 80 GB internal IDE HD. I installed it and
booted into the BIOS. It was there. I set it to "AUTO" and
rebooted into Windows. When I go to my computer, it is not there.
When I go to Add New Hardware, it is in the list of things to choose.
It says it is working properly too. Will my model PC not support a
80GB HD? What do I have to do? TIA
(Msg. 2) Posted: Sun Jun 25, 2006 3:32 am
Post subject: Re: Additional HD [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
Thanks for the reply!! So even though I don't see the Drive in My
Computer it will be recognized in disk management? Sorry for being a
newbie. TIA
Does RAID5 performance increase with additional drives? - Or, put another way, will a hardware RAID5 system (such as running off of an Adaptec FastTrak S150-SX4 SATA controller) perform better with four 120-GB drives than it would be with three 160-GB drives, assuming comparable drive performance specs? It..
emachines 360 - Install additional HDD as secondary slave .. - The emachines handbook says to set the jumper on the additional HDD to cable select, install in the empty bay underneath the CD-ROM drive, plug the HDD into the slave connector on the ribbon that connects the CD-ROM drive to the secondary IDE connector. ...
Need help thinking through additional storage options for .. - I have a home network with 4 computers, 3 desktops and one laptop, as well as two ReplayTVs. The main computer is mine; I have an Asus p4pe mb with two SATA drives connected to the onboard controller (Promise). I have a Plextor DVD burner attached to...
Can I delete/create additional partitions on USB sticks? - When I bought the last USB stick the stick was pre-formatted by factory with a single FAT32 partition. I wonder wether it is possible to a) delete this existing partiton ? How ? and b) create a new or even multiple new partitions on a single USB..
IBM ServeRaid 3L, 3H, 4H and WindowsXP - Hi here is some information on how to make a ServeRaid 3L, 3H or 4H work on Windows XP http://w3.ift.ulaval.ca/~etche1/HowSXP.htm thanks Etienne Chenard
All times are: Pacific Time (US & Canada) (change)
Page 1 of 1
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
FAQ
Profile
Private Messages
Log in
TIA