On Tue, 15 Nov 2005 22:09:37 -0600, "beach bum"
<sunshine&sand DeleteThis @surf.net> wrote:
>Hopefully this is a good forum to post this and someone can help.
>
>Tried to flash the bios on this Award 6.00PG and now get one long beep and
>what appears to be two short beeps. Nothing on the screen. Reset bios jumper
>was tried but that didn't work either. The board is a M81DC-X, PII Celron
>500. 256 Megs of ram.
>The oLD bios string was 02-14-2000, i810-W83627HF-6A69MDL9C-00
Could well be, that after replacing the jumper, your VGA or AGP
card was not seated properly.
Power off, open the case, and see that the card is seated
properly, including any tywraps or handles it may have.
Then, cross your fingers and hope that this was the problem.
As a faulty bios-flash may be a big problem
--
Kind regards,
Gerard Bok