BIOS DEAD ? NO PANIC, go to w w w . f l a s h b i o s ...

FAQ

Profile

BIOS DEAD ? NO PANIC, go to w w w . f l a s h b i o s ...

Hardware Problem Solving Community! (Home) -> Elitegroup

Next: PCI access bus missing?

Author

Message

gjhkl

External

Since: Aug 25, 2003
Posts: 1

(Msg. 1) Posted: Mon Aug 25, 2003 5:00 am Post subject: BIOS DEAD ? NO PANIC, go to w w w . f l a s h b i o s . o r g Archived from groups: alt>comp>periphs>mainboard>elitegroup (more info?)

BIOS DEAD ? NO PANIC, go to w w w . f l a s h b i o s . o r g Is your bios dead by accident ? Got you an error by flashing it, or a dirty virus has killed it ? NO PANIC !!!! Go to my site: The Flashbios Site !!!!!!!!!!!!!!!!!! I have a very cheap and quick flashbios-reprogramming service !!!!!!! New chips are available too. Greetings, Murphy >> Stay informed about: BIOS DEAD ? NO PANIC, go to w w w . f l a s h b i o s ...

Display posts from previous:

Related Topics:

k7s5a pro dead? - Hey! Was troubleshooting memory in my wife's sys. Found out I was running the CAS latency wrong after I messed around inside the case. My CPU fan blocks the ram slots so I removed it to swap ram. Put it back but didn't connect the fan (bonehead.....

Dead KS75a - Make sure you have one side panel on case, to hold everything square in place. Otherwise, case flexes and you get the symptoms you describe.

Mobo dead? - I no longer have my K7S5A, but could still be suffering from the after effects... My K7S5A pushed my patience too far and I ended up dumping it, but not before letting my brother do the chipset mod to it. The result was a non post and the smell of..

K7S5A V1.1----it's dead Jim?? - I have a homebuilt PC, with the K7S5A 1.1, an XP 1700 CPU with OEM heatsink and fan, 256M Kingston RAM, and assorted drives, etc, running under W2000. Sunday night, I finished converting some raw DVD to MPEG. Only thing open was Adobe Premier, and Outloo...

P4M800PRO-M Dead? - My P4M800PR0-M{1.0A) Was running fine with a Celeron 346 and two Ultra 1G PC3200 DDR. I tried upgrading it to a PD 805. While I was at it I thought I'd use the DDR2 slots instead, so I replaced the memory with two Buffalo 533mhz DDR2. When I try to..

	Hardware Problem Solving Community! (Home) -> Elitegroup	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum