Page 27 in the manual:
Set On-Chip Serial ATA to Enhanced Mode.
On Sun, 20 Apr 2008 16:22:17 GMT, thedaltonkey <none.RemoveThis@000.com> wrote:
>The problem I have is that the mainboard I have is a PCchips P13G with
>two SATA channel and two IDE. My hard-disk, a Samsung SATA 160GB,
>works well; but the CD-ROM device is not recogniced by the BIOS. I
>need to format my operating system y there is no way to do it without
>a CD_Rom device.
>
>Mi first try was to change the power supply box, now it is a 500W one
>and the problem is still happenning. Then, I’ve changed the CD-Rom
>device and I have no good answer from my pc; and in addition, then i
>changed the IDE data-flag. And it doesn’t work!. I’ve tryed swapping
>the IDE between the two conectors onto the mainboard and its still no
>working.
>
>Is there any special way to configure the BIOS of this kind of
>mainboard? I must say that the IDE CD-ROM device was working well one
>week ago. I think somebody at home have changed my BIOS configuration
>by mistake. But now i need to know how fix it by configuring my BIOS
>apropriately in order to get the IDE device working together with my
>SATA HardDisk.
>
>Thanks in advance.
FAQ
Search
Profile
Private Messages
Log in/Register/Password
