BioStar M7NCD BIOS Settings?

This refers to the non-Pro model...
How/where do I control the CPU multiplier? I see the FSB setting, and I read
in the manual that if I set CPU Performance to [Expert] that I will have
full control over performance, but although I can adjust the AGP frequency
in 1 MHz increments, the FSB can be set to 133, 166 or 200, and I can
control memory speed separately, I can't change the multiplier?
I'm running an XP2400+ and would like to run it at 166x13 instead of the
default 133x15.
I'm also having trouble installing the so-called NVidia Overclock utility
(thinking this may be the way to get at the multiplier?).
I've installed the full driver set that came on the CD, but when I try to
install
the overclock utility, I get a cryptic message box saying "You must install
driver
first". What driver, and where do I get it? The Biostar web site has no
drivers available except for the NVidia chipset drivers that came on the CD.
Am I SOL here? Any ideas much appreciated.


--
**********************************************************************
** All opinions are mine alone.Do not attribute elsewhere!
**********************************************************************
** Peter van der Goes, Professor, Computers & Information Technology
** Rose State College
*********************** Contact ************************************
** Office e-mail: pvan DeleteThis @rose.edu
** Home e-mail: p_vandergoes DeleteThis @cox.net
** Web Page: http://www.rose.edu/Faculty/pvan/index.htm
**********************************************************************

On Sun, 26 Oct 2003 07:27:04 -0600, Peter van der Goes wrote:

 > This refers to the non-Pro model...
 > How/where do I control the CPU multiplier? I see the FSB setting, and I read
 > in the manual that if I set CPU Performance to [Expert] that I will have
 > full control over performance, but although I can adjust the AGP frequency
 > in 1 MHz increments, the FSB can be set to 133, 166 or 200, and I can
 > control memory speed separately, I can't change the multiplier?
 > I'm running an XP2400+ and would like to run it at 166x13 instead of the
 > default 133x15.

If the board/bios doesn't have multiplier control, you can change the
multiplier to 13 by modding the cpu or by some other means like the pinmod
guide. These sites should help.

<a style='text-decoration: underline;' href="http://www.beachlink.com/candjac/TbredDecode0.htm#Table" target="_blank">http://www.beachlink.com/candjac/TbredDecode0.htm#Table</a>

<a style='text-decoration: underline;' href="http://www.ocinside.de" target="_blank">http://www.ocinside.de</a>

--
Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz (24x100FSB)
<a style='text-decoration: underline;' href="http://mysite.verizon.net/res0exft/cpu.html" target="_blank">http://mysite.verizon.net/res0exft/cpu.html</a><!-- ~MESSAGE_AFTER~ -->