Soyo CD

 > Read the manual...........
 >
 > You need to manually enter board information at the CD splash screen.
 >
(snip)

He probably did. Download the specific drivers for your motherboard at the
soyo site. Make sure you're using the correct OS/ drivers.
Joe
Joe
"Erik the Bold" <offshoreracer30.TakeThisOut@nospamyahoo.com> wrote in message
news:vhq9gnlk7to911@corp.supernews.com...
 > Read the manual...........
 >
 > You need to manually enter board information at the CD splash screen.
 >
 >
 > "Iron Helix" <ironhelix.TakeThisOut@whocares.com> wrote in message
 > news:xN4Ta.3382$3I1.2697@fe03.atl2.webusenet.com...
  > > I just built a new system using a kt333 Dragon Ultra Platinum board and
an
  > > AMD 2200+.
  > > Every thing went together fine and the system booted up flawless. the
only
  > > problem I had is with the Soyo cd that came with the board. when I
insert
  > > the CD the Soyo screen comes up but when I click on Board Information it
  > > says "Unknown Motherboard". also when I click on Drivers or Manuals it
 > says
  > > "No Drivers found for your Motherboard" or "No manuals found for your
  > > Motherboard". Is it possible I recieved the wrong cd. the revision no.
on
  > > the cd is 20020101.
  > >
  > >
  > >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Soyo CD 

"Joe and Julie" <joeshmo.RemoveThis@spam.worldnet.att.net> wrote in message
news:9mmTa.67498$3o3.4504856@bgtnsc05-news.ops.worldnet.att.net...
 > He probably did. Download the specific drivers for your motherboard at the
 > soyo site. Make sure you're using the correct OS/ drivers.
 > Joe


Joe,

Your input is appreciated, however, you are incorrect and not quite on
topic. Reading the installation portion of the manual, page 83, under
*step 1*, it states that for this board: "If you are running Win NT/2000/XP,
the Soyo CD will not detect your motherboard type. In that case the
following dialog will pop up. Please choose your motherboard model number
and press OK." You *must* enter the information manually.................

EtB<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Soyo CD 

I am supposing that Iron Helix is not a morron. If you can't see the pop-up
on installation, you shouldn't be using a computer. I beleive Iron Helix can
get past that stage.
I am assuming he did. So Iron Helix, how did it go.
Joe

"Erik the Bold" <offshoreracer30no.DeleteThis@spamyahoo.com> wrote in message
news:vht02ejfgueg64@corp.supernews.com...
 >
 > "Joe and Julie" <joeshmo.DeleteThis@spam.worldnet.att.net> wrote in message
 > news:9mmTa.67498$3o3.4504856@bgtnsc05-news.ops.worldnet.att.net...
  > > He probably did. Download the specific drivers for your motherboard at
the
  > > soyo site. Make sure you're using the correct OS/ drivers.
  > > Joe
 >
 >
 > Joe,
 >
 > Your input is appreciated, however, you are incorrect and not quite on
 > topic. Reading the installation portion of the manual, page 83, under
 > *step 1*, it states that for this board: "If you are running Win
NT/2000/XP,
 > the Soyo CD will not detect your motherboard type. In that case the
 > following dialog will pop up. Please choose your motherboard model number
 > and press OK." You *must* enter the information manually.................
 >
 > EtB
 >
 >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Soyo CD 

well I was originaly using win98 so there was no input needed to enter the
screen. but exploring the cd I found 3 manuals in the manual folder P41
Fire Dragon, P4S Dragon Plus, K7V Dragon Plus, thats all no manual for
kt333 Dragon Ultra Platinum. Now I am using winxp so when I insert the
SoyoCD in the drive a box pops up asking me to select my motherboard but the
same 3 boards list. No KT333 Dragon Ultra Platinum.

ps. I DID read the manual thats how I know that what I am seeing is
incorrect.

"Julie K Barnett" <joeshmo.TakeThisOut@dslextreme.com> wrote in message
news:vhtd2lhkth2p53@corp.supernews.com...
 > I am supposing that Iron Helix is not a morron. If you can't see the
pop-up
 > on installation, you shouldn't be using a computer. I beleive Iron Helix
can
 > get past that stage.
 > I am assuming he did. So Iron Helix, how did it go.
 > Joe
 >
 > "Erik the Bold" <offshoreracer30no.TakeThisOut@spamyahoo.com> wrote in message
 > news:vht02ejfgueg64@corp.supernews.com...
  > >
  > > "Joe and Julie" <joeshmo.TakeThisOut@spam.worldnet.att.net> wrote in message
  > > news:9mmTa.67498$3o3.4504856@bgtnsc05-news.ops.worldnet.att.net...
   > > > He probably did. Download the specific drivers for your motherboard at
 > the
   > > > soyo site. Make sure you're using the correct OS/ drivers.
   > > > Joe
  > >
  > >
  > > Joe,
  > >
  > > Your input is appreciated, however, you are incorrect and not quite on
  > > topic. Reading the installation portion of the manual, page 83, under
  > > *step 1*, it states that for this board: "If you are running Win
 > NT/2000/XP,
  > > the Soyo CD will not detect your motherboard type. In that case the
  > > following dialog will pop up. Please choose your motherboard model
number
  > > and press OK." You *must* enter the information
manually.................
  > >
  > > EtB
  > >
  > >
  > >
  > >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Soyo CD