Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

CPU temps

 
   Hardware Problem Solving Community! (Home) -> Epox RSS
Next:  Horstshit is back alert.  
Author Message
Lee MacMillan

External


Since: Mar 10, 2007
Posts: 17



(Msg. 1) Posted: Mon Jul 16, 2007 8:40 am
Post subject: CPU temps
Archived from groups: alt>comp>periphs>mainboard>epox (more info?)

The CPU temps of my Athlon 2700+ is running about 10 deg C higher than the
1800+ ran, 52 vs 42 at a room temperature in the high 70s. I have also gone
from a fanless ATI 9250 to a fan-equipped ATI 9600XT and from a fanless to a
fan-equipped northbridge heatsink. The case temp now runs 40-43 and the CPU
temp 11-12 deg higher. Heatsink is an all copper unit and hasn't changed.
The tower case has in inlet fan in front and exhaust fan in rear buy I know
that the vents in the front of the case impede airflow (I pulled the front
off and the CPU temp dropped 3-4 deg C).

Questions: does a 52 deg C CPU temp seem high? The computer is on about 10
hrs per day.

 >> Stay informed about: CPU temps 
Back to top
Login to vote
Graham W

External


Since: May 13, 2004
Posts: 74



(Msg. 2) Posted: Mon Jul 16, 2007 4:13 pm
Post subject: Re: CPU temps [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Lee MacMillan wrote:
> The CPU temps of my Athlon 2700+ is running about 10 deg C higher
> than the 1800+ ran, 52 vs 42 at a room temperature in the high 70s.
> I have also gone from a fanless ATI 9250 to a fan-equipped ATI 9600XT
> and from a fanless to a fan-equipped northbridge heatsink. The case
> temp now runs 40-43 and the CPU temp 11-12 deg higher. Heatsink is
> an all copper unit and hasn't changed. The tower case has in inlet
> fan in front and exhaust fan in rear buy I know that the vents in the
> front of the case impede airflow (I pulled the front off and the CPU
> temp dropped 3-4 deg C).
>
> Questions: does a 52 deg C CPU temp seem high? The computer is on
> about 10 hrs per day.

No. That's about right for your setup but if you wish, you could try to
increase
the area of the front vents. I did on my case and about tripled it!

I sawed a couple of cuts down into the front plastic and then wiggled the
'tounge' until it fractured and gave me a much enlarged vent. This reduces
the amount of room air being inducted through the floppy and optical
drives, too. This was located on the front panel underneath, so there's
no visual impact from the mod.


--
--
Graham W http://www.gcw.org.uk/ XP1800+ Page added, Graphics Tutorial
WIMBORNE http://www.wessex-astro.org.uk/ Wessex Astro Society's Website
Dorset UK Info, Meeting Dates, Sites & Maps

 >> Stay informed about: CPU temps 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
ex5 high temps - I've put a 9800 pro in my ex5 and at idle its 42C. FS2004 gets it up to 58C. Its stable but god thats hot. Could my cooling be incorrectly seated or is this normal(ish) Paul --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system..

Epox 8KHA+ - Maximum hard drive size? - Does anyone know, what is the biggest hard drive that the 8KHA+ can use? Specifically, I mean the largest drive that the BIOS can handle. I don't want to use an overlay driver. Epox says that the largest they have tested is 80 gigs, but that doesn't..

Deskstar 60GXP - It has just started with its clilcking sound... it seems to be on and off..... THE DRIVE IS STILL WORKING..... when another computer becomes available to day i will be backing everything up over network to the another drive. I have been snooping around....

Applications crashing, increasing voltage seems to help bu.. - I've been experiencing application crashes for a few months now, with it getting worse and worse. A backup without compression works fine but a backup with compression crashes every time. This lead me to believe it was the CPU and when I increase..

restart and cpu host clock - I am still having problems with the system purchased last thursday after 2 motherboard changes and a cd burner change..... when installing hardware eg the [VIA 4 in one and the magic keyboard utilities] install calls for reset the system actually powers...
   Hardware Problem Solving Community! (Home) -> Epox All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]