CT-9CJS Handigator

you MUST connect the W.O.L lead from the c box to the mb and then switch it
on in the bios.

Then your remote will work ok!

"Lord Dragosani" <cooper13 DeleteThis @hotmail.com> wrote in message
news:p8yYb.9220$9H3.7044@fe2.columbus.rr.com...
 > I just got a new Chaintech CT-JCJS. All seems to be working fine except
for
 > the "Handigator" remote. I've got the CBox and drivers installed
properly,
 > but nothing happens when I push the buttons on the remote. I've also
tried
 > putting fresh new batteries in it.
 >
 > Any Ideas out there??
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: CT-9CJS Handigator 

Thanks for the tip! Unfortunately, it still isn't working.

I notice that there is a red LED near the top of the remote. Shouldn't it
flash or turn on or something when I push the buttons?? Mine doesn't do
anything. Again, I've tried replacing the batteries, but it seems like the
thing is dead.

Maybe I just have a bad remote.

"Lazarus" <backfrom DeleteThis @thedead.com> wrote in message
news:c0ufvn$p24$1@hercules.btinternet.com...
 > you MUST connect the W.O.L lead from the c box to the mb and then switch
it
 > on in the bios.
 >
 > Then your remote will work ok!
 >
 > "Lord Dragosani" <cooper13 DeleteThis @hotmail.com> wrote in message
 > news:p8yYb.9220$9H3.7044@fe2.columbus.rr.com...
  > > I just got a new Chaintech CT-JCJS. All seems to be working fine except
 > for
  > > the "Handigator" remote. I've got the CBox and drivers installed
 > properly,
  > > but nothing happens when I push the buttons on the remote. I've also
 > tried
  > > putting fresh new batteries in it.
  > >
  > > Any Ideas out there??
  > >
  > >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: CT-9CJS Handigator 

Funny....I just returned mine and got a new one....the original one died
when I was using it.........

You are not using an infra red keyboard by any chance? that can mess with
it!

Do you have USB COMPOSITE listed in device manager?


"Lord Dragosani" <cooper13 DeleteThis @hotmail.com> wrote in message
news:P1CYb.24829$g95.23983@fe3.columbus.rr.com...
 > Thanks for the tip! Unfortunately, it still isn't working.
 >
 > I notice that there is a red LED near the top of the remote. Shouldn't it
 > flash or turn on or something when I push the buttons?? Mine doesn't do
 > anything. Again, I've tried replacing the batteries, but it seems like
the
 > thing is dead.
 >
 > Maybe I just have a bad remote.
 >
 > "Lazarus" <backfrom DeleteThis @thedead.com> wrote in message
 > news:c0ufvn$p24$1@hercules.btinternet.com...
  > > you MUST connect the W.O.L lead from the c box to the mb and then switch
 > it
  > > on in the bios.
  > >
  > > Then your remote will work ok!
  > >
  > > "Lord Dragosani" <cooper13 DeleteThis @hotmail.com> wrote in message
  > > news:p8yYb.9220$9H3.7044@fe2.columbus.rr.com...
   > > > I just got a new Chaintech CT-JCJS. All seems to be working fine
except
  > > for
   > > > the "Handigator" remote. I've got the CBox and drivers installed
  > > properly,
   > > > but nothing happens when I push the buttons on the remote. I've also
  > > tried
   > > > putting fresh new batteries in it.
   > > >
   > > > Any Ideas out there??
   > > >
   > > >
  > >
  > >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: CT-9CJS Handigator 

The LED is a strange beast......the first time i ever inserted batteries and
pressed the mouse pad the led flashed red once.

At the time I didnt have the WOL connected.

It has never ever flashed again even when inserting new batts so either it
was an indicator that WOL wasnt connected or its a factory preset and only
ever flashes once when you first use it to indicate its working ok

Thats all I can think of!


"Lord Dragosani" <cooper13.DeleteThis@hotmail.com> wrote in message
news:P1CYb.24829$g95.23983@fe3.columbus.rr.com...
 > Thanks for the tip! Unfortunately, it still isn't working.
 >
 > I notice that there is a red LED near the top of the remote. Shouldn't it
 > flash or turn on or something when I push the buttons?? Mine doesn't do
 > anything. Again, I've tried replacing the batteries, but it seems like
the
 > thing is dead.
 >
 > Maybe I just have a bad remote.
 >
 > "Lazarus" <backfrom.DeleteThis@thedead.com> wrote in message
 > news:c0ufvn$p24$1@hercules.btinternet.com...
  > > you MUST connect the W.O.L lead from the c box to the mb and then switch
 > it
  > > on in the bios.
  > >
  > > Then your remote will work ok!
  > >
  > > "Lord Dragosani" <cooper13.DeleteThis@hotmail.com> wrote in message
  > > news:p8yYb.9220$9H3.7044@fe2.columbus.rr.com...
   > > > I just got a new Chaintech CT-JCJS. All seems to be working fine
except
  > > for
   > > > the "Handigator" remote. I've got the CBox and drivers installed
  > > properly,
   > > > but nothing happens when I push the buttons on the remote. I've also
  > > tried
   > > > putting fresh new batteries in it.
   > > >
   > > > Any Ideas out there??
   > > >
   > > >
  > >
  > >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: CT-9CJS Handigator