|
Related Topics:
| WTS: Riverstone Networks RS 8000, RS 3000 - I have a large inventory of and Intersted in selling. G30-B128 G80-CHS G8M-CM2 AND MORE . E-mail and offers to or call
Linking Wired and Wireless Networks - Hi, Just curious as to whether this can be done. Here goes: I have a wired network with an SMB four port router and a Linksys 802.11b WAP in one room of my house. My main Internet is a broadband I use W2k Advanced server running..
what do i need to do this? seperating office networks, at.. - Sorry for my but I'm looking for some basic advice to get started. We are looking to add a Terminal Server and file server to our office (let's call this NETWORK B), but want to be sure that any remote users terminal serving in cannot..
two networks running from one access point? - Not sure how to explain this but... my neighbor and i would like to setup my using an outside access point (buddy next door [If your I have his ok]). Now if i just wanted to connect one of my computers then no problem but i..
Beginner's question about 10Mbps and 100 Mbps networks - I currently have a small LAN which includes a pc server running XP Pro and also a laptop running Win98. Both have 10/100 ethernet network cards and the devices connect via an HP hub and twisted pair cable. Network traffic between the two..
|
|
| Author |
Message |
External
Since: Aug 20, 2006
Posts: 5
|
(Msg. 1) Posted: Sun Aug 20, 2006 11:28 am
Post subject: Connecting 2 Home Networks
Archived from groups: comp>sys>ibm>pc>hardware>networking (more info?)
|
|
|
I have two small networks, each with it's own separate link to the
internet. 1 uses the range 192.168.x.x and the other uses 10.x.x.x.
Each network connects to a router that is it's link to the internet.
I'd like to be able to get both networks to talk to each other. In
otherwords, use the computer at 192.168.1.50 to talk to 10.0.1.1.
If I try, the computer trys to find the network out across it's
internet connection. I've even tried connecting the two routers with
a network cable... that didn't work.
Any suggestions?
Thanks. |
|
| Back to top |
|
 | |
External
Since: Dec 17, 2005
Posts: 301
|
(Msg. 2) Posted: Mon Aug 21, 2006 1:28 pm
Post subject: Re: Connecting 2 Home Networks [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
phelper wrote:
> I have two small networks, each with it's own separate link to the
> internet. 1 uses the range 192.168.x.x and the other uses 10.x.x.x.
> Each network connects to a router that is it's link to the internet.
>
> I'd like to be able to get both networks to talk to each other. In
> otherwords, use the computer at 192.168.1.50 to talk to 10.0.1.1.
> If I try, the computer trys to find the network out across it's
> internet connection. I've even tried connecting the two routers with
> a network cable... that didn't work.
>
> Any suggestions?
Both of those address ranges are non-route-able addresses. You cannot
them dynamically, only statically. What that means is that you must set
a static route in all of your computers to allow them to see each other.
It also means you need another router between them to route packets to
each side. You cannot simply put a network cable between the two
existing routers and have them see each other. What you need is a router
that connects between these two routers. You can create a router out of
one your computers if it's got two network cards in it, then you can
connect one network connection to each network. The computer will then
act as a router between the two networks. All you would need to do is
set a static route on the 192.x.x.x computers to route all 10.0.x.x
through this computer. And similarly do the same on the 10.0.x.x
computer to route through this computer to the 192.x.x.x range.
Yousuf khan |
|
| Back to top |
|
| |
External
Since: Aug 20, 2006
Posts: 5
|
(Msg. 3) Posted: Tue Aug 22, 2006 5:55 pm
Post subject: Re: Connecting 2 Home Networks [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
>
>Both of those address ranges are non-route-able addresses. You cannot
>them dynamically, only statically. What that means is that you must set
>a static route in all of your computers to allow them to see each other.
>It also means you need another router between them to route packets to
>each side. You cannot simply put a network cable between the two
>existing routers and have them see each other. What you need is a router
>that connects between these two routers. You can create a router out of
>one your computers if it's got two network cards in it, then you can
>connect one network connection to each network. The computer will then
>act as a router between the two networks. All you would need to do is
>set a static route on the 192.x.x.x computers to route all 10.0.x.x
>through this computer. And similarly do the same on the 10.0.x.x
>computer to route through this computer to the 192.x.x.x range.
Thanks for your note, great information. I'm pretty good with
computers and such, but I've never set up a "static route" between
computers. I think I will go the way of using one of the computers as
a router between the networks as it has two nics in it. Could you
assist in the procedure for setting pu the static route? I'm not able
to figure that one out. Thanks again for your help. >> Stay informed about: Connecting 2 Home Networks |
|
| Back to top |
|
| |
External
Since: Dec 17, 2005
Posts: 301
|
(Msg. 4) Posted: Wed Aug 23, 2006 1:39 pm
Post subject: Re: Connecting 2 Home Networks [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
phelper wrote:
> Thanks for your note, great information. I'm pretty good with
> computers and such, but I've never set up a "static route" between
> computers. I think I will go the way of using one of the computers as
> a router between the networks as it has two nics in it. Could you
> assist in the procedure for setting pu the static route? I'm not able
> to figure that one out. Thanks again for your help.
It should be pretty easy on Windows XP, just select the two connections
using the ctrl-leftmousebutton, and then rightmousebutton the "bridge"
connection.
Yousuf Khan >> Stay informed about: Connecting 2 Home Networks |
|
| Back to top |
|
| |
External
Since: Dec 17, 2005
Posts: 301
|
(Msg. 5) Posted: Wed Aug 23, 2006 2:05 pm
Post subject: Re: Connecting 2 Home Networks [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Yousuf Khan wrote:
> phelper wrote:
>> Thanks for your note, great information. I'm pretty good with
>> computers and such, but I've never set up a "static route" between
>> computers. I think I will go the way of using one of the computers as
>> a router between the networks as it has two nics in it. Could you
>> assist in the procedure for setting pu the static route? I'm not able
>> to figure that one out. Thanks again for your help.
>
> It should be pretty easy on Windows XP, just select the two connections
> using the ctrl-leftmousebutton, and then rightmousebutton the "bridge"
> connection.
>
> Yousuf Khan
Oh, and then you have to configure the static routes on each computer in
each subnet. So let's say the machine that's acting as the router has
one interface that is 192.168.1.100, while it's other interface gets
10.0.0.200. Then all of the computers on the 192.168.1.x subnet will
need to be told to route their packets destined for the 10.0.0.x subnet
through 192.168.1.100. Similarly, all computers on the 10.0.0.x subnet
need to be told to go through 10.0.0.200 to get to 192.168.1.x subnet.
Yousuf Khan >> Stay informed about: Connecting 2 Home Networks |
|
| Back to top |
|
| |
External
Since: Aug 20, 2006
Posts: 5
|
(Msg. 6) Posted: Wed Aug 23, 2006 8:04 pm
Post subject: Re: Connecting 2 Home Networks [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
>
>Oh, and then you have to configure the static routes on each computer in
>each subnet. So let's say the machine that's acting as the router has
>one interface that is 192.168.1.100, while it's other interface gets
>10.0.0.200. Then all of the computers on the 192.168.1.x subnet will
>need to be told to route their packets destined for the 10.0.0.x subnet
>through 192.168.1.100. Similarly, all computers on the 10.0.0.x subnet
>need to be told to go through 10.0.0.200 to get to 192.168.1.x subnet.
>
> Yousuf Khan
That's the part I have trouble with... I'm not sure how to tell each
computer how to route only 10.x.x.x or 192.168.x.x traffic.
I was also having trouble with the other network, once all the cables
were in place, from using the other networks internet feed. No matter
what I did, the computer acting as the router (the 10.x.x.x) would get
it's internet using its 192.168.x.x connection. I finally put a
metric of 1 on the 10.x.x.x and that seemed to fix it.
I do have the bridge set up, just unclear on the routing. Thanks
again for your help. >> Stay informed about: Connecting 2 Home Networks |
|
| Back to top |
|
| |
External
Since: Aug 20, 2006
Posts: 5
|
(Msg. 7) Posted: Wed Aug 23, 2006 8:07 pm
Post subject: Re: Connecting 2 Home Networks [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Tue, 22 Aug 2006 17:55:54 -0500, phelper
<hoofhah2002 RemoveThis @nospam.yahoo.com> wrote:
>
>>
>>Both of those address ranges are non-route-able addresses. You cannot
>>them dynamically, only statically. What that means is that you must set
>>a static route in all of your computers to allow them to see each other.
>>It also means you need another router between them to route packets to
>>each side. You cannot simply put a network cable between the two
>>existing routers and have them see each other. What you need is a router
>>that connects between these two routers. You can create a router out of
>>one your computers if it's got two network cards in it, then you can
>>connect one network connection to each network. The computer will then
>>act as a router between the two networks. All you would need to do is
>>set a static route on the 192.x.x.x computers to route all 10.0.x.x
>>through this computer. And similarly do the same on the 10.0.x.x
>>computer to route through this computer to the 192.x.x.x range.
>
>Thanks for your note, great information. I'm pretty good with
>computers and such, but I've never set up a "static route" between
>computers. I think I will go the way of using one of the computers as
>a router between the networks as it has two nics in it. Could you
>assist in the procedure for setting pu the static route? I'm not able
>to figure that one out. Thanks again for your help.
Maybe it's "route add 10.0.0.12 192.168.0.4"
I'm now able to ping the 10.x.x.x network. >> Stay informed about: Connecting 2 Home Networks |
|
| Back to top |
|
| |
External
Since: Dec 08, 2004
Posts: 208
|
(Msg. 8) Posted: Thu Aug 24, 2006 6:42 pm
Post subject: Re: Connecting 2 Home Networks [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
phelper wrote:
> That's the part I have trouble with... I'm not sure how to tell each
> computer how to route only 10.x.x.x or 192.168.x.x traffic.
>
> I was also having trouble with the other network, once all the cables
> were in place, from using the other networks internet feed. No matter
> what I did, the computer acting as the router (the 10.x.x.x) would get
> it's internet using its 192.168.x.x connection. I finally put a
> metric of 1 on the 10.x.x.x and that seemed to fix it.
>
> I do have the bridge set up, just unclear on the routing. Thanks
> again for your help.
That's one way of doing the routing by using the "route" command from
the command-line. Also from the command-line you'll need to use the
"route -p add ..." command form, so that the static route will remain
after you reboot those computers. That is after you figure all of your
routing is right.
However, if you want to do it in a graphical way, you might be able to
do it from the network adapter properties. Right-click on the network
adapter, select Properties, then under General tab, go to the TCP/IP
item. Click on TCP/IP Properties, then under its General tab, click on
Advanced. Under "IP Settings" you'll see "Default Gateways" section.
You can just add the IP address of the router machine, and it should
automatically be able to figure out which networks it's going to and
its metric.
Yousuf Khan >> Stay informed about: Connecting 2 Home Networks |
|
| Back to top |
|
| |
|
FAQ
Search
Profile
Private Messages
Log in/Register/Password
