Cpu Question.

FAQ

Profile

Cpu Question.

Hardware Problem Solving Community! (Home) -> Chips

Next: EVGA Geforce 8800 GTS

Author

Message

bussinessmenss

External

Since: Oct 14, 2007
Posts: 1

(Msg. 1) Posted: Sun Oct 14, 2007 9:52 pm Post subject: Cpu Question. Archived from groups: comp>sys>ibm>pc>hardware>chips (more info?)

I have an E6300, currently at stock speeds and on stock cooling. I used the thermal paste that was already on the cpu hsf. Can I over clock to around 2.0GHz. And still be fine? I have an 80mm intake right next to the cpu. Thanks. -- bussinessmenss >> Stay informed about: Cpu Question.

Display posts from previous:

Related Topics:

DDR RAM Question....... - I have a Jetway S447 Motherboard that support non ecc memory. Whats would be better having 1.5Gb of 266MHz DDR RAM or 1.0 Gb of 333MHz DDR RAM?

ram question - What's the difference between LGS GM71C17803CJ6 and LGS GM71C17403CJ6 chips? Would it be ok to put two 16mb modules of each in the same PC?

Question - Something strange observed with one of my old boxes after WinXP reinstalled (clean install - partition deleted and recreated). Harddisk activities (files copied from drive to drive, or over the network) causes CPU load up to 100% sustained for the..

AGP question - I learned in my basic digital logic and design courses that the clock rate determined the rate at which flip-flops/registers could read in data. My question is how can a GPU running at say, 500Mhz, clock-in AGP data at a rate of 2+GB/sec? I suppose if...

AGP SBA question - I've been looking over the AGP 3.0 spec. and noticed there appear to be 8 pins dedicated to SBA and that SBA is a one way bus (from vid card to AGP port). This is about all I was able to get out of the documentation though. Is SBA merely the method by...

	Hardware Problem Solving Community! (Home) -> Chips	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum