Cpu posting problem

On Sat, 13 Dec 2003 11:38:31 -0600, John wrote:

 > I am building a economy computer for a friend of mine. Put in a PC chips
 > motherboard with a duron 1.6 processor. Everything is working great except
 > the cpu post at 1.2. I have loaded optimized defaults in the bios and there
 > is only 1 jumper on the board to clear cmos. Thinking about RMA ing the
 > processor. Before I do that just wanted to make sure I had covered all my
 > bases. Any suggestions?

12x100=1200
12x133=1600
multipler x FSB = CPU speed. The D1600 has a 12 multiplier. Set the FSB to
133 (or higher).

--
Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz (24x100FSB)
<a style='text-decoration: underline;' href="http://mysite.verizon.net/res0exft/cpu.html" target="_blank">http://mysite.verizon.net/res0exft/cpu.html</a><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Cpu posting problem 

"John" <jfoster1nspam.DeleteThis@cableone.net> wrote in message news:<vtmk7f2a3ldva7.DeleteThis@corp.supernews.com>...
 > I am building a economy computer for a friend of mine. Put in a PC chips
 > motherboard with a duron 1.6 processor. Everything is working great except
 > the cpu post at 1.2. I have loaded optimized defaults in the bios and there
 > is only 1 jumper on the board to clear cmos. Thinking about RMA ing the
 > processor. Before I do that just wanted to make sure I had covered all my
 > bases. Any suggestions?
 > Thanks

12x100=1200
12x133=1600
multipler x FSB = CPU speed. The D1600 has a 12 multiplier. Set the FSB to
133 (or higher).

My bad, diddn't think about the Duron's being 133MHz.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Cpu posting problem