Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

DDR on ECS K8T890-A that's not dual channel

  
   Hardware Problem Solving Community! (Home) -> Elitegroup RSS
Next:  Adding disk storage  
Author Message
Perry Webb

External


Since: Nov 19, 2005
Posts: 18



(Msg. 1) Posted: Wed Nov 23, 2005 4:55 pm
Post subject: DDR on ECS K8T890-A that's not dual channel
Archived from groups: alt>comp>periphs>mainboard>elitegroup (more info?)
Has anyone tried running 184 pin DDR memory that's not dual channel on an
ECS K8T890-A motherboard?

 >> Stay informed about: DDR on ECS K8T890-A that's not dual channel 
Back to top
Login to vote
tcsenter

External


Since: May 15, 2005
Posts: 52



(Msg. 2) Posted: Thu Nov 24, 2005 3:07 am
Post subject: Re: DDR on ECS K8T890-A that's not dual channel [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
There is no such thing as dual channel memory (at least not for PCs).
There is dual channel operation or mode, but the memory is the exact
same stuff used in single channel operation. With AMD64, the memory
controller is on the processor, not the motherboard or chipset.

 >> Stay informed about: DDR on ECS K8T890-A that's not dual channel 
Back to top
Login to vote
mottman

External


Since: Feb 28, 2006
Posts: 2



(Msg. 3) Posted: Wed Mar 01, 2006 12:55 am
Post subject: Re: DDR on ECS K8T890-A that's not dual channel [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Actually to run dual channel on this motherboard you need two sticks
of ddr with the same density.
Also beware that the AGP slot on this board is (hay)wired to the pci
bus which theroreticaly runs at x1, but found that the performance
was actually less.
Don't get this mobo if you expect to use the agp and expect any video
performance.
One other thing, this board does NOT support dual core as Fry's has
been selling this mb-cpu combo.
 >> Stay informed about: DDR on ECS K8T890-A that's not dual channel 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Kv2 Extreme,Dual Channel Question - Hello everyone,i am looking for A Dual Channel Kit that will work on my recently acquired KV2,Would Corsair Value select work? Does anyone have recommendations,do i need special ram if i want to OC the CPU ?I heard confusing things about the Ram needin...

ECS K8T890-A and AGP video - Hi all. The local Fry's has this motherboard and a bare Athlon 64 3500+ for $199. Seems like a good deal, but after some research I see that the AGP-e slot is only good for certain video cards. I have an MSI 6600GT AGP card that is not on the..

SATA and PATA on ECS K8T890-A - Has anyone tried to run SATA and PATA (IDE) hard drives on an ECS K8T890-A motherboard at the same time?

ECS N2U400-A 6 Channel Audio, Where and how? - It says on the box it has 6 channel audio. My boad didn't come with a SPDIF. It only has mic, line-in, and line-out. ECS don't sell SPDIF. Am I missing something? Thanks James

P4m800pro-m with AMD Dual-Core - I just bought a MB CPU combo at Fry's and I can't get it to boot up in bios. All I can get is the fan to go with no beep. Then, the power supply won't boot at all. I have a 350W ATI power supply. Do I need a bigger power supply. I cleared the CMOS,....
   Hardware Problem Solving Community! (Home) -> Elitegroup All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]