ECS 755-A2 Screen goes blank

FAQ

Profile

ECS 755-A2 Screen goes blank

Hardware Problem Solving Community! (Home) -> Elitegroup

Next: SY-KT333 - What northbridge chassis fan is used?

Author

Message

bp1964

Joined: Apr 25, 2006
Posts: 1

(Msg. 1) Posted: Tue Apr 25, 2006 1:04 pm
Post subject: ECS 755-A2 Screen goes blank

I boot into WinXP and after about one minute my mouse stops moving and the the screen goes blank. It appears I still have power, the light on the monitor is still green. Nothing will bring the screen back up. I power down and then it takes several attempts to boot back into XP. After this process the system will run fine. Obviously it is one of those nasty intermittant annoyances.

ECS 755-A2
1.0GB memory
AMD CPU 1.8MHZ

>> Stay informed about: ECS 755-A2 Screen goes blank

Display posts from previous:

Related Topics:

Blank Screen after CPU upgrade on K7s5a - K7s5a (specs below) running clean for 2 years now with 1600+ processor. Disconnect power Installed 2400+ processor. reconnect power Power on blank screen, all fans on, all disks spun up ok, disk light stuck on solid disconnect powre from all drives..

K7S5A won't boot 1 beep blank screen - my computer crashed so i restart, but when it boot up i got a blank screen and 1 beep every 5 seconds. I swapped ram and video card, unplugged ide cables and floppy drive but it still won't boot... anyone with a clue or has this happened to them before??...

Continually Reboots at XP's Login Screen - Today, my desktop computer encountered the oddest occurrence. Upon boot up, the computer goes through the traditional system check; then it begins loading Windows XP; upon finishing loading XP the screen turn black and adjust to the default resolution....

new mobo, at xp boot screen comp keeps restarting - i just installed a new mobo (Elitegroup PF21 Extreme) and i got the BIOS set up to where it boots from the HDD and all, but when i get to the WinXP boot screen (black, with the little bar in the middle that looks like a progress bar) it sits for a few..

PC works fine yet CMOS does not see drive - Hi Can anybody help me with this I have an EliteGroup 755-A main board with Phoenix AwardBios. In the Standard CMOS Features setting the IDE Channel 0 Master detects the CD/DVD Drive ... there is no other device is shown. Yet there is a 160 Gb..

	Hardware Problem Solving Community! (Home) -> Elitegroup	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum