Entering qflash from POST without permission on gigabyte m..

FAQ

Profile

Entering qflash from POST without permission on gigabyte m..

Hardware Problem Solving Community! (Home) -> Gigabyte

Next: *******Fashion new******************

Author

Message

sasageissa

External

Since: Nov 21, 2007
Posts: 1

(Msg. 1) Posted: Wed Nov 21, 2007 12:41 am
Post subject: Entering qflash from POST without permission on gigabyte mainboard
Archived from groups: alt>comp>periphs>mainboard>gigabyte (more info?)

How is it possible that there isn't an option to hide boot menu and
qflash from post on GA-945GCMX-S2?
This way every hog can screw up the BIOS and format the HD without
asking the PC's owner permission first.

>> Stay informed about: Entering qflash from POST without permission on gigabyte m..

Display posts from previous:

Related Topics:

Hang when entering Dual BIOS / QFLASH - Hello, I just bought a Gigabyte GA-8IPE1000 Pro and received a revision 2.0 board. Upon installation, everything seemed to work fine, but I can NOT get into the Dual BIOS utility or QFLASH. I can press DEL key to enter BIOS, but when I press the F8 ke...

Gigabyte GA-8KNXP won't enter post - I have a Gigabyte GA-8KNXP (Rev 1) board that after 2 years stopped booting up. It will not even enter POST. It has always been on a APC, battery backup. The only thing I've done recently was back in December I upgraded to a P4 3.2 Ghz (prescott) CPU..

Gigabyte 81955X Royal Won't POST - Hi all, I just bought a Gigabyte 81955X Royal to replace an ancient 440BX based system that finally gave up the ghost. As such, I have a bunch of brand new parts that I have no real way to test in another system. I have tried to assemble the followin...

Gigabyte GA-M61SME-S2 no post with IDE drive attached - Assembled new GA-M61SME-S2 mainboard, 450 watt power supply, AMD Athlon 64x2 2.3GHz cpu, 1 MB DDR2@800 memory, 160 MB WD SATA hard drive, floppy, and IDE cdrom. System will only post if the IDE cdrom is not attached to the motherboard. Tried another....

Gigabyte GA-5AA - I recently purchased an old Gigabyte GA-5AA motherboard to use with an amd k62 300 cpu. The board came with a pentiumn 166 and booted fine. To my surprise however when i put the amd chip in and set up the correct jumpers and switches it wouldnt boot. I..

	Hardware Problem Solving Community! (Home) -> Gigabyte	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum