FIXED! (SOYO KT600 Dragon Plus "Screamer problem")

It was my CPU shutting down on overheat. Thanks to PCNINJAS I went and
checked the temperatures using the SOYO hardware monitor along with AIDA32
and found the temperatures running at 68°C approximately. If the temps went
higher the machine would emit a loud steady scream and shut down., I then
would have to shut off the machine, unplug the AC power and wait a few
moments and replug and restart. I went and purchased a VOLCANO 9 CoolMod
heatsink and fan, removed the old heatsink/fan and installed VOLCANO. BIG
difference now! Temps are running at about 36°C even under heavy loads.
(It's a little loud, but the lighted fan is kool.) Cooling DOES make a BIG
difference! Lucky I didn't burn my processor. Thanks again PCNINJAS for
suggesting "overheated cpu or the fan stopped" you were right on - I'm a
happy SOYO KT600 Dragon Plus user once more. This morning's data is
reading........

Sensor Properties
Sensor Type ITE IT8705F
Sensor Access ISA 290h

Temperatures
Motherboard 36 °C (97 °F)
CPU 23 °C (73 °F)
Aux 36 °C (97 °F)

Cooling Fans
CPU 5273 RPM

Voltage Values
CPU Core 1.60 V
+2.5 V 3.31 V
+3.3 V 2.96 V
+5 V 5.05 V
+12 V 10.43 V
+5 V Standby 2.85 V
This is a great group.