 |
|
|
|
Next: P4R800-V Deluxe and creating a SATA Boot Drive
|
| Author |
Message |
External
Since: Dec 24, 2004
Posts: 9
|
(Msg. 1) Posted: Sun Jan 02, 2005 1:35 am
Post subject: Failure to create backup image by Ghost 2003
Archived from groups: comp>sys>ibm>pc>hardware>storage (more info?)
|
|
|
I tried to create backup image of my computer without success using Ghost
2003 and looking forward to any assistance from experienced members.
Hardware in use:-
1. Toshiba R150 NB
2. USB 1.1 bootable floppy drive
3. HP 8100 IDE CD Writer Plus + USB 2.0/1.1 to IDE adapter
Software in use:-
1. Standard bootable floppy disk created by Ghost 2003
Options selected: USB support - UHCI driver, assign DOS floppy
driver name and PC DOS
When I boot the disk, it ran smoothly and opened Ghost successfully.
However, when I selected Local->Disk->To Image and select local source
drive. In the Look in, there is only A: Local drive and the CD Writer did
not show up. Can someone advise the possible causes and fixes so I can go
forward.
I note that after I quitted Ghost, I pressed Ctrl + Alt + Del the system
rebooted to the CD Writer if I removed the bootable disk from the floppy
drive. It seems the CD Writer was successfully connected but just did not
appear.
Thanks,
Ray |
|
| Back to top |
|
 | |
External
Since: Dec 24, 2004
Posts: 118
|
(Msg. 2) Posted: Sun Jan 02, 2005 8:16 am
Post subject: Re: Failure to create backup image by Ghost 2003 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Toshiba R250 NB. NB stands for notebook? So, what are you plugging in
to? A PCMCIA card?
You should get a message during the floppy boot, during USB drivers
launch, saying that the adapter was found, followed by the drive was
found. If you didn't get these, then it isn't seeing your USB port
and/or drive.
IMF |
|
| Back to top |
|
| |
External
Since: Dec 24, 2004
Posts: 118
|
(Msg. 3) Posted: Mon Jan 03, 2005 7:12 am
Post subject: Re: Failure to create backup image by Ghost 2003 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Did you get the messages saying the port and drive were recognized as
the drivers booted up?
IMF
Ray wrote:
> Irwin,
>
> Yes, NB stands for notebook computer. I plugged the writer into one
of USB
> ports.
>
> Is there any fix to see the USB writer?
>
> Thanks,
>
> Ray
>
> "Irwin" <ebct.RemoveThis@hotmail.com>
> ???????:1104682589.548312.99310@c13g2000cwb.googlegroups.com...
> > Toshiba R250 NB. NB stands for notebook? So, what are you plugging
in
> > to? A PCMCIA card?
> >
> > You should get a message during the floppy boot, during USB drivers
> > launch, saying that the adapter was found, followed by the drive
was
> > found. If you didn't get these, then it isn't seeing your USB port
> > and/or drive.
> >
> > IMF
> ><!-- ~MESSAGE_AFTER~ --> >> Stay informed about: Failure to create backup image by Ghost 2003 |
|
| Back to top |
|
| |
External
Since: Dec 24, 2004
Posts: 9
|
(Msg. 4) Posted: Mon Jan 03, 2005 10:35 am
Post subject: Re: Failure to create backup image by Ghost 2003 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Irwin,
Yes, NB stands for notebook computer. I plugged the writer into one of USB
ports.
Is there any fix to see the USB writer?
Thanks,
Ray
"Irwin" <ebct.RemoveThis@hotmail.com>
???????:1104682589.548312.99310@c13g2000cwb.googlegroups.com...
> Toshiba R250 NB. NB stands for notebook? So, what are you plugging in
> to? A PCMCIA card?
>
> You should get a message during the floppy boot, during USB drivers
> launch, saying that the adapter was found, followed by the drive was
> found. If you didn't get these, then it isn't seeing your USB port
> and/or drive.
>
> IMF
><!-- ~MESSAGE_AFTER~ --> >> Stay informed about: Failure to create backup image by Ghost 2003 |
|
| Back to top |
|
| |
External
Since: Dec 24, 2004
Posts: 9
|
(Msg. 5) Posted: Mon Jan 03, 2005 1:35 pm
Post subject: Re: Failure to create backup image by Ghost 2003 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Irwin,
No, it just said the driver initialised.....
Ray
"Irwin" <ebct.RemoveThis@hotmail.com> wrote in message
news:1104765144.871535.201230@c13g2000cwb.googlegroups.com...
> Did you get the messages saying the port and drive were recognized as
> the drivers booted up?
>
> IMF
>
> Ray wrote:
>> Irwin,
>>
>> Yes, NB stands for notebook computer. I plugged the writer into one
> of USB
>> ports.
>>
>> Is there any fix to see the USB writer?
>>
>> Thanks,
>>
>> Ray
>>
>> "Irwin" <ebct.RemoveThis@hotmail.com>
>> ???????:1104682589.548312.99310@c13g2000cwb.googlegroups.com...
>> > Toshiba R250 NB. NB stands for notebook? So, what are you plugging
> in
>> > to? A PCMCIA card?
>> >
>> > You should get a message during the floppy boot, during USB drivers
>> > launch, saying that the adapter was found, followed by the drive
> was
>> > found. If you didn't get these, then it isn't seeing your USB port
>> > and/or drive.
>> >
>> > IMF
>> >
><!-- ~MESSAGE_AFTER~ --> >> Stay informed about: Failure to create backup image by Ghost 2003 |
|
| Back to top |
|
| |
External
Since: Nov 19, 2003
Posts: 56
|
(Msg. 6) Posted: Fri Jan 07, 2005 11:51 am
Post subject: Re: Failure to create backup image by Ghost 2003 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Dec 24, 2004
Posts: 118
|
(Msg. 7) Posted: Fri Jan 07, 2005 12:17 pm
Post subject: Re: Failure to create backup image by Ghost 2003 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Jan 10, 2005
Posts: 1
|
(Msg. 8) Posted: Mon Jan 10, 2005 10:35 am
Post subject: Re: Failure to create backup image by Ghost 2003 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
David,
Where to get the DOS USB to IDE driver?
Thanks,
Ray
"David Chien" <chiendh.DeleteThis@uci.edu> wrote in message
news:crmp8a$9qd$3@news.service.uci.edu...
> The Ghost USB driver won't work with a USB to IDE adapter.
>
> Here, get a real USB CD-RW or edit the config.sys/autoexec.bat files on
> the boot floppy to include the DOS USB to IDE driver, and see if it'll run
> after that.<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: Failure to create backup image by Ghost 2003 |
|
| Back to top |
|
| |
External
Since: Dec 06, 2004
Posts: 353
|
(Msg. 9) Posted: Mon Jan 10, 2005 10:35 am
Post subject: Re: Failure to create backup image by Ghost 2003 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
There is no such driver. Nor do "real" USB CD drives exist.
You need a USB ASPI driver and a bridge board with
atapi support.
There is aspiehci.sys, dated 2002-09. I thought it came with Ghost 8.
"Ray" <NoSpam-lizhiqiang1 DeleteThis @GMail.com> wrote in message
news:34fh5uF4b9karU1@individual.net...
> David,
>
> Where to get the DOS USB to IDE driver?
>
> "David Chien" <chiendh DeleteThis @uci.edu> wrote in message
> news:crmp8a$9qd$3@news.service.uci.edu...
> > The Ghost USB driver won't work with a USB to IDE adapter.
> >
> > Here, get a real USB CD-RW or edit the config.sys/autoexec.bat files on
> > the boot floppy to include the DOS USB to IDE driver, and see if it'll run
> > after that.
>
><!-- ~MESSAGE_AFTER~ --> >> Stay informed about: Failure to create backup image by Ghost 2003 |
|
| Back to top |
|
| |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Profile
Private Messages
Log in
