Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

G450 with Windows 2000 problem

 
   Hardware Problem Solving Community! (Home) -> Matrox RSS
Next:  Case lights and buttons on laptop  
Author Message
Om_Audio

External


Since: Dec 14, 2005
Posts: 2



(Msg. 1) Posted: Wed Dec 14, 2005 3:16 am
Post subject: G450 with Windows 2000 problem
Archived from groups: alt>comp>periphs>videocards>matrox (more info?)

I installed a G450 on my BX chipset based Win2000 pro system- but it only
works in safe mode- or svga after I uninstall it in safe mode- once I reboot
the screen goes black after the os loads and the keyboard stops responding
as well (no caps or num lock lights)

I have the latest drivers but not sure what the problem is. Any tips
appreciated.

Matrox G450 32mb DH- G45+MDHA32DB
Asus P2BF BX board
Windows 2000 Pro latest updates

Thanks,

C

 >> Stay informed about: G450 with Windows 2000 problem 
Back to top
Login to vote
eugene.henderson

External


Since: May 10, 2005
Posts: 5



(Msg. 2) Posted: Thu Dec 15, 2005 3:56 pm
Post subject: Re: G450 with Windows 2000 problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Om_Audio wrote:
> I installed a G450 on my BX chipset based Win2000 pro system- but it only
> works in safe mode- or svga after I uninstall it in safe mode- once I reboot
> the screen goes black after the os loads and the keyboard stops responding
> as well (no caps or num lock lights)
>
> I have the latest drivers but not sure what the problem is. Any tips
> appreciated.
>
> Matrox G450 32mb DH- G45+MDHA32DB
> Asus P2BF BX board
> Windows 2000 Pro latest updates

I have a couple of TUSL2-Cs with the Matrox G450 in them working w/o
any problems (knock on wood). What sort of peripherical do you have?
You may have to move them around presuming that interrupts are being
shared in such a way as to thwart your efforts. This includes NICs,
sound cards, etc.

Are you sure the G450 really works? There are some diagnostics to
exercise the adapter. Oh ... and ... I am speaking of the AGP version.
I think there is also a PCI version?

HTH.

 >> Stay informed about: G450 with Windows 2000 problem 
Back to top
Login to vote
Om_Audio

External


Since: Dec 14, 2005
Posts: 2



(Msg. 3) Posted: Fri Dec 16, 2005 4:13 am
Post subject: Re: G450 with Windows 2000 problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

I have followed Matrox's instructions to remove and reinstall the drivers
etc- same issue. I removed the PCI card just below the AGP slot (G450 I have
is AGP)
Where are the diagnostics and will they run in Safe mode or VGA mode?

Thanks,

C

<eugene.henderson.RemoveThis@bigfoot.com> wrote in message
news:1134690960.762610.18060@g44g2000cwa.googlegroups.com...
> Om_Audio wrote:
>> I installed a G450 on my BX chipset based Win2000 pro system- but it only
>> works in safe mode- or svga after I uninstall it in safe mode- once I
>> reboot
>> the screen goes black after the os loads and the keyboard stops
>> responding
>> as well (no caps or num lock lights)
>>
>> I have the latest drivers but not sure what the problem is. Any tips
>> appreciated.
>>
>> Matrox G450 32mb DH- G45+MDHA32DB
>> Asus P2BF BX board
>> Windows 2000 Pro latest updates
>
> I have a couple of TUSL2-Cs with the Matrox G450 in them working w/o
> any problems (knock on wood). What sort of peripherical do you have?
> You may have to move them around presuming that interrupts are being
> shared in such a way as to thwart your efforts. This includes NICs,
> sound cards, etc.
>
> Are you sure the G450 really works? There are some diagnostics to
> exercise the adapter. Oh ... and ... I am speaking of the AGP version.
> I think there is also a PCI version?
>
> HTH.
>
 >> Stay informed about: G450 with Windows 2000 problem 
Back to top
Login to vote
eugene.henderson

External


Since: May 10, 2005
Posts: 5



(Msg. 4) Posted: Mon Dec 19, 2005 1:38 am
Post subject: Re: G450 with Windows 2000 problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

short answer.

g450 manual has a short section on booting in safe mode, setting res.
to lowest, and then rebooting. usu. necessary when some h/w s/w change
has a problem.

else, make a barebones setup and try again. ghost to mirror boot
partition. start with reset BIOS and no adapters. if you cannot get
the board to start in this case, then perhaps there is a real h/w
problem.

a fresh OS install seems to be in order. for so much trouble, make
sure to reset the h/w too. and i forget how the intel drivers for the
chipset are to be installed?

good luck.
 >> Stay informed about: G450 with Windows 2000 problem 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
G450, Windows XP and 3D - The videocard in question is G450 AGP Low Profile, the OS is Windows XP Home SP2. The card is working fine in 2D. But when I tried to launch Unreal Tournament (1999 version, not UT2003/UT2004) the game told me I don't have 3D Acceleration. The utility..

G450 DVD playback problem - I've searched for, but not found, the answer to this problem. I have a P4 1.6 on a MSI 645e Max2 MB running XP Pro SP2. I just installed the G450 dualhead, along with the latest Matrox software, and am having problems with the DVD playback being very dar...

Problem with Millennium G450 TV-Out - I am trying the use a VGA to S-video and RCA adapter to connect the 2nd Video output to TV. All I got is a dark image. I am using the latest Matrox Millennium G450 Driver wiht Windows XP Pro. Before I connect the TV to the 2nd video connector, I have....

G450 dual head problem - Hello, I've got a problem with a Matrox millenium G450 dual head graphic card. The DVDmax option disappeared ! However my TV output still works with the dual display (so it still displays Windows desktop). I uninstalled / reinstalled the latest certifie...

G450 - How do you set a two monitor configuration so that login screen, menus, error messages, etc. appear on the left side monitor and not split between the two monitors using Win2kSPK2.
   Hardware Problem Solving Community! (Home) -> Matrox All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]