|
Next: IDE Drive order need help
|
| Author |
Message |
External
Since: Aug 02, 2003
Posts: 23
|
(Msg. 1) Posted: Sat Aug 02, 2003 9:33 pm
Post subject: GA-7N400-L1 problems.. need help..
Archived from groups: alt>comp>periphs>mainboard>giga-byte (more info?)
|
|
|
I have been putting a new machine together for XP Home.
I have the following parts -
AMD 2600
GA-7N400-L1
GeForce 4 8x AGP -128M
on board sound.
400w PSU
2x 256Meg Memory.
Firstly. I can't get the system to boot properly.. usually have to switch on
then hit the reset button before it will boot. All my components are
recognised.. BUT .. my CPU is only showing as 1.24G.
I managed to get XP to install. but it is a bad one. When I put a boot disc
in A drive to try and format the C drive it isn't found.. a B drive that
'rotates' with the A drive is.
I can't find any settings in the BIOS that might alter what I'm getting!
Any ideas please?
TIA
Mo |
|
| Back to top |
|
 | |
External
Since: Nov 11, 2003
Posts: 64
|
(Msg. 2) Posted: Sat Aug 02, 2003 9:33 pm
Post subject: Re: GA-7N400-L1 problems.. need help.. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
hi
i have the boot problem also, i think that is caused by low voltage under
boot up sequence. i got this after i instlled a 8x ati radeon 9700pro. to
much load under boot up. (i have autoboot when pwr goes on...)
your disk problem i dont know, check all ide cables and if you're useing
raid enable it in bios and select it as boot disk in the bios also.
coco
"Mo" <nospam RemoveThis @notobeseen.com> skrev i meddelandet
news:bgfstd$e3c$1@lust.ihug.co.nz...
> I have been putting a new machine together for XP Home.
>
> I have the following parts -
> AMD 2600
> GA-7N400-L1
> GeForce 4 8x AGP -128M
> on board sound.
> 400w PSU
> 2x 256Meg Memory.
>
> Firstly. I can't get the system to boot properly.. usually have to switch
on
> then hit the reset button before it will boot. All my components are
> recognised.. BUT .. my CPU is only showing as 1.24G.
>
> I managed to get XP to install. but it is a bad one. When I put a boot
disc
> in A drive to try and format the C drive it isn't found.. a B drive that
> 'rotates' with the A drive is.
>
> I can't find any settings in the BIOS that might alter what I'm getting!
>
> Any ideas please?
>
> TIA
>
> Mo
>
>
><!-- ~MESSAGE_AFTER~ --> |
|
| Back to top |
|
| |
External
Since: Aug 02, 2003
Posts: 23
|
(Msg. 3) Posted: Sun Aug 03, 2003 10:40 am
Post subject: Re: GA-7N400-L1 problems.. need help.. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Thanks for the response CoCo
I'll try another case/power supply today. I'm hoping that it will 'cure' CPU
problem as well, there is only the CLK_SW switch on the board to change the
CPU rating.
I've realised that the boot floppy won't 'see' the C drive NTFS!
Have Googled for info on reformatting for FAT, trying that later. >> Stay informed about: GA-7N400-L1 problems.. need help.. |
|
| Back to top |
|
| |
External
Since: Nov 11, 2003
Posts: 64
|
(Msg. 4) Posted: Sun Aug 03, 2003 10:40 am
Post subject: Re: GA-7N400-L1 problems.. need help.. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
hi
i have lived with the no first-boot issue a long time now (since i uppgraded
my gf). it looks stable, kind of. just to press start button and wait 5-10
sec and then reset. dont know if this will go away with a new (expensive)
psu! this may also be dependent of the mb design.
coco
"Mo" <nospam.DeleteThis@notobeseen.com> skrev i meddelandet
news:bghavr$gt8$1@lust.ihug.co.nz...
> Thanks for the response CoCo
>
> I'll try another case/power supply today. I'm hoping that it will 'cure'
CPU
> problem as well, there is only the CLK_SW switch on the board to change
the
> CPU rating.
>
> I've realised that the boot floppy won't 'see' the C drive NTFS!
>
> Have Googled for info on reformatting for FAT, trying that later.
>
>
><!-- ~MESSAGE_AFTER~ --> >> Stay informed about: GA-7N400-L1 problems.. need help.. |
|
| Back to top |
|
| |
External
Since: Aug 02, 2003
Posts: 23
|
(Msg. 5) Posted: Sun Aug 03, 2003 6:56 pm
Post subject: Re: GA-7N400-L1 problems.. need help.. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Aug 02, 2003
Posts: 23
|
(Msg. 6) Posted: Mon Aug 04, 2003 12:44 am
Post subject: Re: GA-7N400-L1 problems.. need help.. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Aug 03, 2003
Posts: 1
|
(Msg. 7) Posted: Mon Aug 04, 2003 12:44 am
Post subject: Re: GA-7N400-L1 problems.. need help.. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Mo" <nospam DeleteThis @notobeseen.com> wrote in message news:<bgisn8$o3h$1@lust.ihug.co.nz>...
> the new tower is about the same as the other.. I still can't get the CPU
> 2600 showing.. have got it to 1.666 by changing the FSB .. I reckon the
> Mobo/bios is the problem.. looks as though I'll be looking for another.
Mo,
If its the 333FSB version of the XP2600, you will need to go into the
'Frequency settings' option in the bios and set the FSB to 166
manually on this board. Then your processor speed should show up
correctly.
Regards,<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: GA-7N400-L1 problems.. need help.. |
|
| Back to top |
|
| |
External
Since: Aug 02, 2003
Posts: 23
|
(Msg. 8) Posted: Mon Aug 04, 2003 6:15 pm
Post subject: Re: GA-7N400-L1 problems.. need help.. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Thanks galaxy,
I got the memory changed this morning.. it now boots better.. I got XP
installed... it won't do a reboot when windows says...I have to fiddle about
to boot.. I still have a 'feeling' about the mobo.
I wondered what the FSB setting should be.. played around a little. Will
check that out this evening. >> Stay informed about: GA-7N400-L1 problems.. need help.. |
|
| Back to top |
|
| |
External
Since: Aug 02, 2003
Posts: 23
|
(Msg. 9) Posted: Wed Aug 06, 2003 3:49 pm
Post subject: Re: GA-7N400-L1 problems.. need help.. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Aug 02, 2003
Posts: 23
|
(Msg. 10) Posted: Wed Aug 06, 2003 7:52 pm
Post subject: Re: GA-7N400-L1 problems.. need help.. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
FAQ
Profile
Private Messages
Log in
