Gigabyte GA-7N400 Pro

External Since: Jul 27, 2003 Posts: 2

Hello

I have just upgraded my PC and am having a few problems. Any help or
comments would be appreciated.

Original system was based on an AMD Athlon 500 mHz, 1287MB RAM, 10GB
HDD, CD, DVD, CDRW with PCI modem, sound, TV and network card, 1x AGP
ATI RAGE 128 graphics card running off a 250W PSU. Mainboard
motherboard. I have windows 98 installed which I am keeping.

The new system has been upgraded to the following:
AMD Athlon XP 2400 mHz
Gigabyte GA-7N400 Pro motherboard
256MB DDR RAM
120GB HDD
350W PSU
As the motherboard requires a 4X AGP card I am using a Nvidia 16MB
card.

The problems are
1) Processor is only reported as Athlon XP 1800mHz
2) The floppy drive light is constantly on but the floppy drive will
not read any floppies or boot up from a:\
3) After every successful boot (ie into Dos or windows off my old HDD)
when rebooted there is no signal coming from the PC – the monitor
light blinks - which means no signal! If I leave it off for 15 minutes
it will work when booted again.
4) If I install my new HDD then nothing seems to work, it is
unformatted obviously.
5) The CD/DVD/CDRW are not detected in windows but they appear in BIOS

This happens even when in BIOS everything but the essentials are
disabled, including the backup BIOS. The testing setup was just one
HDD, CDRW, CD, floppy and Graphics card.

Any help much appreciated

Regards

Richard

External Since: Nov 11, 2003 Posts: 64

hi

2 you have put the cable wrong way or used a errous cable, test the old
cable!

coco

"Richard" <rsphorler RemoveThis @hotmail.com> skrev i meddelandet
news:ab23a154.0307271001.3ce1a5b7@posting.google.com...
> Hello
>
> I have just upgraded my PC and am having a few problems. Any help or
> comments would be appreciated.
>
> Original system was based on an AMD Athlon 500 mHz, 1287MB RAM, 10GB
> HDD, CD, DVD, CDRW with PCI modem, sound, TV and network card, 1x AGP
> ATI RAGE 128 graphics card running off a 250W PSU. Mainboard
> motherboard. I have windows 98 installed which I am keeping.
>
> The new system has been upgraded to the following:
> AMD Athlon XP 2400 mHz
> Gigabyte GA-7N400 Pro motherboard
> 256MB DDR RAM
> 120GB HDD
> 350W PSU
> As the motherboard requires a 4X AGP card I am using a Nvidia 16MB
> card.
>
> The problems are
> 1) Processor is only reported as Athlon XP 1800mHz
> 2) The floppy drive light is constantly on but the floppy drive will
> not read any floppies or boot up from a:\
> 3) After every successful boot (ie into Dos or windows off my old HDD)
> when rebooted there is no signal coming from the PC - the monitor
> light blinks - which means no signal! If I leave it off for 15 minutes
> it will work when booted again.
> 4) If I install my new HDD then nothing seems to work, it is
> unformatted obviously.
> 5) The CD/DVD/CDRW are not detected in windows but they appear in BIOS
>
> This happens even when in BIOS everything but the essentials are
> disabled, including the backup BIOS. The testing setup was just one
> HDD, CDRW, CD, floppy and Graphics card.
>
> Any help much appreciated
>
> Regards
>
> Richard