GA7-DPXDW-P does not boot

FAQ

Profile

GA7-DPXDW-P does not boot

Hardware Problem Solving Community! (Home) -> Gigabyte

Next: GA-7VT600-L

Author

Message

Kramar

External

Since: Oct 16, 2003
Posts: 1

(Msg. 1) Posted: Thu Oct 16, 2003 5:57 pm Post subject: GA7-DPXDW-P does not boot Archived from groups: alt>comp>periphs>mainboard>giga-byte (more info?)

Hello, I've just bought two motherboard GA-7DPXDW-P with 512MB DDR ECC Registered (Infineon) and I have the problem (first motherboard, no HD or anything else is connected): - fans started for 1 sec - temperature warning led goes on - black screen - no alarms Second motherboard: - fans started - temperature warning led doesn't go on - black screen - no alarms. Thx for all ideas, Mariusz >> Stay informed about: GA7-DPXDW-P does not boot

Display posts from previous:

Related Topics:

Boot up! - Hi, I have a Gigabyte Dual Bios motherboard. A few days ago I had a major problem and the power to my pc was unplugged twice!!?!! This did create a problem with the hard disks which I have fixed, but now the computer switches itself on without any..

Can't boot from CD-ROM - I just replaced a dead motherboard with an 8S661FXMP-RZ (plus CPU, memory, and a new p/s) in a case that already contained a DVD ROM, a pair of HDDs (with W2K installed), and a wireless card. I am pretty sure most of it is working because I can boot fro...

Boot problem help please - Hello, Gigabyte Motherboard GA-6BXC Intel 440 BX AGPset, When we power the computer on nearly immediately we got a long beep - pause - long beep - pause etc ... We checked the power supply and it is ok we do have 6 and 12 volt. Cannot get the bios..

GA-7DPXDW-P Does Not Boot - Hello All, I just bought a new GA-7dPXDW-P. I have installed one of my old working 1GB buffered ECC modules, both MP1900+ and a ATI 8500. Also I connected the cpu cooler/fan, the power on/off, reset, and speaker connectors. My power supply is the..

7N400 Pro won't boot - New machine with 7N400 Pro, 2500+ Barton Core, Radeon 9200 AGP, and 1 512 stick of 3200 DDR, new 425W power. CLK_SW set to On(Auto) and CLK_RATIO all on Off for Default Auto. All fans working, mem led lights up. Boot error is long pause short long..

	Hardware Problem Solving Community! (Home) -> Gigabyte	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum