|
Related Topics:
| Do I need a graphic card? - Can you tell me if I need a graphic card and if so which one I need? 1. I don't play any game on my computer 2. 1.33 Ghz CPU 3. 480 MB of DDR RAM 4. Samsung 760 TFT connected to the built-in VGA port 5. The has an AGP slot 6. I may..
Graphic Card Comparison - AoA, where can i find the sheets for different graphics cards, i m gonna buy a new graphic card currently i have ATI RADEON 9200 128MB. bye
enable/disable the TV OUT on a graphic card? - Hi, I have tried to enable and disable the TV OUT on a graphic card by using the GDI function function and the struct, but it does seem to work. According to it should be possible to
need help on graphic card for art and animation, video - Hello, I got a new computer and needed a graphics card mainly for the
s-video out cause I watch a lot of movies through the tv so I decided
I might as well get a decent one. I picked out the visiontek 512mb
x1300 because they only had 2 pci-e cards at the
which graphic card serie Workstation or Gaming? - Hello all, I have been comparing the two ATI series also the NVidia and can not figure out what are the major between the and Gaming series? One main is obvious: price tag I have a DELL 670 with..
|
|
| Author |
Message |
External

Since: Mar 22, 2007 Posts: 4
|
(Msg. 1) Posted: Thu Mar 22, 2007 5:04 pm
Post subject: Graphic's card problem Archived from groups: alt>comp>periphs>videocards>ati (more info?)
|
|
|
I have been having problems with my Radeon 9550 256 mb graphics card
made by Sapphire. Sometimes when im browsing the internet, i notice
that when i click a link, or on a picture, the screen goes black
because it is not recieveing a signal from the graphics card. I know
that because shortly after a "no signal" msg is displayed. Then i
began to download a few games from my direct to drive account. The
first game i had trouble with was swat 4. When i finneshed installing
it and attempted to play, i nocticed that loading took long for an
AMD
3200+, 2000 MHz, 1 gig ram computer. When the menu finally came, all
the text was disfigured in the sense that they would contantly be
flickering and changing. The background picture was fine. Then when i
tried to play a game, it would take its time to load, again with the
disfigured text. When the game would load, it would usually play for
about a minute and then freeze. Then id have to restart my computer.
this happened every time i played it, and my computer had more then
the minimum hardware requirements to play the game. I then downloaded
Return to castle wolfenstein, and when attempting to play the
multiplayer game, the computer would freeze, and the screen would go
black because there is no signal. While this was happening the
background music would continue to play for about 30 seconds more,
then id have to restart it. Then i tried with Star Wars knights if
the
old republic, and this time there was no disfigured text, but all but
the quit option on the menu would appear. when i tried to play the
game, it would play for a while, and then go into the same state,
with
the monitor going black because of the graphic card. My mother board
is not more then 4 months old, and my graphic card is even newer. I
tried downloading the new driver, but it wont install due to an NSIS
error. Can anybody help please? >> Stay informed about: Graphic's card problem |
|
| Back to top |
|
 |  |
External

Since: Mar 22, 2007 Posts: 4
|
(Msg. 2) Posted: Thu Mar 22, 2007 6:44 pm
Post subject: Re: Graphic's card problem [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
|
|
|
On Mar 22, 6:28 pm, "Michael W. Ryder" <_mwry....DeleteThis@worldnet.att.net>
wrote:
> adham wrote:
> > I have been having problems with my Radeon 9550 256 mb graphics card
> > made by Sapphire. Sometimes when im browsing the internet, i notice
> > that when i click a link, or on a picture, the screen goes black
> > because it is not recieveing a signal from the graphics card. I know
> > that because shortly after a "no signal" msg is displayed. Then i
> > began to download a few games from my direct to drive account. The
> > first game i had trouble with was swat 4. When i finneshed installing
> > it and attempted to play, i nocticed that loading took long for an
> > AMD
> > 3200+, 2000 MHz, 1 gig ram computer. When the menu finally came, all
> > the text was disfigured in the sense that they would contantly be
> > flickering and changing. The background picture was fine. Then when i
> > tried to play a game, it would take its time to load, again with the
> > disfigured text. When the game would load, it would usually play for
> > about a minute and then freeze. Then id have to restart my computer.
> > this happened every time i played it, and my computer had more then
> > the minimum hardware requirements to play the game. I then downloaded
> > Return to castle wolfenstein, and when attempting to play the
> > multiplayer game, the computer would freeze, and the screen would go
> > black because there is no signal. While this was happening the
> > background music would continue to play for about 30 seconds more,
> > then id have to restart it. Then i tried with Star Wars knights if
> > the
> > old republic, and this time there was no disfigured text, but all but
> > the quit option on the menu would appear. when i tried to play the
> > game, it would play for a while, and then go into the same state,
> > with
> > the monitor going black because of the graphic card. My mother board
> > is not more then 4 months old, and my graphic card is even newer. I
> > tried downloading the new driver, but it wont install due to an NSIS
> > error. Can anybody help please?
>
> Have you checked the temperature of the card when you are having
> problems? The fan, if any, may have failed or you might not have
> adequate air circulation around the card and it is getting too hot. If
> you feel the card and it is too hot to touch it is overheated.
> If the card is not overheating you might want to use a program like
> Speedfan to monitor the voltages to see if one of them is out of
> tolerance while you are running the games.- Hide quoted text -
>
> - Show quoted text -
Thank you for replying, i felt the graphic card, and it doesnt seem to
be overheating. i did just downloaded Speedfan, and it five different
reading. One of them is the processor which seems to vary from a arrow
pointing in both directions, to the check mark. There are three with
the down arrow (dont know what that means), and one with a fire sign
lol, and is given the name Temp 3. How can i identify what hardware
component the software is monitoring? >> Stay informed about: Graphic's card problem |
|
| Back to top |
|
 |  |
External

Since: Mar 15, 2005 Posts: 118
|
(Msg. 3) Posted: Thu Mar 22, 2007 11:02 pm
Post subject: Re: Graphic's card problem [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
|
|
|
adham wrote:
> I have been having problems with my Radeon 9550 256 mb graphics card
> made by Sapphire. Sometimes when im browsing the internet, i notice
> that when i click a link, or on a picture, the screen goes black
> because it is not recieveing a signal from the graphics card. I know
> that because shortly after a "no signal" msg is displayed. Then i
> began to download a few games from my direct to drive account. The
> first game i had trouble with was swat 4. When i finneshed installing
> it and attempted to play, i nocticed that loading took long for an
> AMD
> 3200+, 2000 MHz, 1 gig ram computer. When the menu finally came, all
> the text was disfigured in the sense that they would contantly be
> flickering and changing. The background picture was fine. Then when i
> tried to play a game, it would take its time to load, again with the
> disfigured text. When the game would load, it would usually play for
> about a minute and then freeze. Then id have to restart my computer.
> this happened every time i played it, and my computer had more then
> the minimum hardware requirements to play the game. I then downloaded
> Return to castle wolfenstein, and when attempting to play the
> multiplayer game, the computer would freeze, and the screen would go
> black because there is no signal. While this was happening the
> background music would continue to play for about 30 seconds more,
> then id have to restart it. Then i tried with Star Wars knights if
> the
> old republic, and this time there was no disfigured text, but all but
> the quit option on the menu would appear. when i tried to play the
> game, it would play for a while, and then go into the same state,
> with
> the monitor going black because of the graphic card. My mother board
> is not more then 4 months old, and my graphic card is even newer. I
> tried downloading the new driver, but it wont install due to an NSIS
> error. Can anybody help please?
>
Have you checked the temperature of the card when you are having
problems? The fan, if any, may have failed or you might not have
adequate air circulation around the card and it is getting too hot. If
you feel the card and it is too hot to touch it is overheated.
If the card is not overheating you might want to use a program like
Speedfan to monitor the voltages to see if one of them is out of
tolerance while you are running the games. >> Stay informed about: Graphic's card problem |
|
| Back to top |
|
 |  |
External

Since: Mar 15, 2005 Posts: 118
|
(Msg. 4) Posted: Fri Mar 23, 2007 4:56 am
Post subject: Re: Graphic's card problem [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
|
|
|
adham wrote:
> On Mar 22, 6:28 pm, "Michael W. Ryder" <_mwry....RemoveThis@worldnet.att.net>
> wrote:
>> adham wrote:
>>> I have been having problems with my Radeon 9550 256 mb graphics card
>>> made by Sapphire. Sometimes when im browsing the internet, i notice
>>> that when i click a link, or on a picture, the screen goes black
>>> because it is not recieveing a signal from the graphics card. I know
>>> that because shortly after a "no signal" msg is displayed. Then i
>>> began to download a few games from my direct to drive account. The
>>> first game i had trouble with was swat 4. When i finneshed installing
>>> it and attempted to play, i nocticed that loading took long for an
>>> AMD
>>> 3200+, 2000 MHz, 1 gig ram computer. When the menu finally came, all
>>> the text was disfigured in the sense that they would contantly be
>>> flickering and changing. The background picture was fine. Then when i
>>> tried to play a game, it would take its time to load, again with the
>>> disfigured text. When the game would load, it would usually play for
>>> about a minute and then freeze. Then id have to restart my computer.
>>> this happened every time i played it, and my computer had more then
>>> the minimum hardware requirements to play the game. I then downloaded
>>> Return to castle wolfenstein, and when attempting to play the
>>> multiplayer game, the computer would freeze, and the screen would go
>>> black because there is no signal. While this was happening the
>>> background music would continue to play for about 30 seconds more,
>>> then id have to restart it. Then i tried with Star Wars knights if
>>> the
>>> old republic, and this time there was no disfigured text, but all but
>>> the quit option on the menu would appear. when i tried to play the
>>> game, it would play for a while, and then go into the same state,
>>> with
>>> the monitor going black because of the graphic card. My mother board
>>> is not more then 4 months old, and my graphic card is even newer. I
>>> tried downloading the new driver, but it wont install due to an NSIS
>>> error. Can anybody help please?
>> Have you checked the temperature of the card when you are having
>> problems? The fan, if any, may have failed or you might not have
>> adequate air circulation around the card and it is getting too hot. If
>> you feel the card and it is too hot to touch it is overheated.
>> If the card is not overheating you might want to use a program like
>> Speedfan to monitor the voltages to see if one of them is out of
>> tolerance while you are running the games.- Hide quoted text -
>>
>> - Show quoted text -
>
> Thank you for replying, i felt the graphic card, and it doesnt seem to
> be overheating. i did just downloaded Speedfan, and it five different
> reading. One of them is the processor which seems to vary from a arrow
> pointing in both directions, to the check mark. There are three with
> the down arrow (dont know what that means), and one with a fire sign
> lol, and is given the name Temp 3. How can i identify what hardware
> component the software is monitoring?
>
Temperature 1 is normally the CPU, 2 is the motherboard, and 3 is often
not available which is why it is reading as high. You can configure the
reported temperatures in the Configure option. Just uncheck 3.
You might also look at the voltages and make sure that they are within
specs and don't change when running games. >> Stay informed about: Graphic's card problem |
|
| Back to top |
|
 |  |
External

Since: Mar 22, 2007 Posts: 4
|
(Msg. 5) Posted: Fri Mar 23, 2007 5:27 am
Post subject: Re: Graphic's card problem [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
|
|
|
On Mar 23, 2:03 am, "Michael W. Ryder" <_mwry... RemoveThis @worldnet.att.net>
wrote:
> adham wrote:
> > On Mar 22, 6:28 pm, "Michael W. Ryder" <_mwry... RemoveThis @worldnet.att.net>
> > wrote:
> >> adham wrote:
> >>> I have been having problems with my Radeon 9550 256 mb graphics card
> >>> made by Sapphire. Sometimes when im browsing the internet, i notice
> >>> that when i click a link, or on a picture, the screen goes black
> >>> because it is not recieveing a signal from the graphics card. I know
> >>> that because shortly after a "no signal" msg is displayed. Then i
> >>> began to download a few games from my direct to drive account. The
> >>> first game i had trouble with was swat 4. When i finneshed installing
> >>> it and attempted to play, i nocticed that loading took long for an
> >>> AMD
> >>> 3200+, 2000 MHz, 1 gig ram computer. When the menu finally came, all
> >>> the text was disfigured in the sense that they would contantly be
> >>> flickering and changing. The background picture was fine. Then when i
> >>> tried to play a game, it would take its time to load, again with the
> >>> disfigured text. When the game would load, it would usually play for
> >>> about a minute and then freeze. Then id have to restart my computer.
> >>> this happened every time i played it, and my computer had more then
> >>> the minimum hardware requirements to play the game. I then downloaded
> >>> Return to castle wolfenstein, and when attempting to play the
> >>> multiplayer game, the computer would freeze, and the screen would go
> >>> black because there is no signal. While this was happening the
> >>> background music would continue to play for about 30 seconds more,
> >>> then id have to restart it. Then i tried with Star Wars knights if
> >>> the
> >>> old republic, and this time there was no disfigured text, but all but
> >>> the quit option on the menu would appear. when i tried to play the
> >>> game, it would play for a while, and then go into the same state,
> >>> with
> >>> the monitor going black because of the graphic card. My mother board
> >>> is not more then 4 months old, and my graphic card is even newer. I
> >>> tried downloading the new driver, but it wont install due to an NSIS
> >>> error. Can anybody help please?
> >> Have you checked the temperature of the card when you are having
> >> problems? The fan, if any, may have failed or you might not have
> >> adequate air circulation around the card and it is getting too hot. If
> >> you feel the card and it is too hot to touch it is overheated.
> >> If the card is not overheating you might want to use a program like
> >> Speedfan to monitor the voltages to see if one of them is out of
> >> tolerance while you are running the games.- Hide quoted text -
>
> >> - Show quoted text -
>
> > Thank you for replying, i felt the graphic card, and it doesnt seem to
> > be overheating. i did just downloaded Speedfan, and it five different
> > reading. One of them is the processor which seems to vary from a arrow
> > pointing in both directions, to the check mark. There are three with
> > the down arrow (dont know what that means), and one with a fire sign
> > lol, and is given the name Temp 3. How can i identify what hardware
> > component the software is monitoring?
>
> Temperature 1 is normally the CPU, 2 is the motherboard, and 3 is often
> not available which is why it is reading as high. You can configure the
> reported temperatures in the Configure option. Just uncheck 3.
> You might also look at the voltages and make sure that they are within
> specs and don't change when running games.- Hide quoted text -
>
> - Show quoted text -
how do i tell what voltage to use if its not mentioned in the manual? >> Stay informed about: Graphic's card problem |
|
| Back to top |
|
 |  |
External

Since: Mar 15, 2005 Posts: 118
|
(Msg. 6) Posted: Fri Mar 23, 2007 3:02 pm
Post subject: Re: Graphic's card problem [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
|
|
|
adham wrote:
> On Mar 23, 2:03 am, "Michael W. Ryder" <_mwry....DeleteThis@worldnet.att.net>
> wrote:
>> adham wrote:
>>> On Mar 22, 6:28 pm, "Michael W. Ryder" <_mwry....DeleteThis@worldnet.att.net>
>>> wrote:
>>>> adham wrote:
>>>>> I have been having problems with my Radeon 9550 256 mb graphics card
>>>>> made by Sapphire. Sometimes when im browsing the internet, i notice
>>>>> that when i click a link, or on a picture, the screen goes black
>>>>> because it is not recieveing a signal from the graphics card. I know
>>>>> that because shortly after a "no signal" msg is displayed. Then i
>>>>> began to download a few games from my direct to drive account. The
>>>>> first game i had trouble with was swat 4. When i finneshed installing
>>>>> it and attempted to play, i nocticed that loading took long for an
>>>>> AMD
>>>>> 3200+, 2000 MHz, 1 gig ram computer. When the menu finally came, all
>>>>> the text was disfigured in the sense that they would contantly be
>>>>> flickering and changing. The background picture was fine. Then when i
>>>>> tried to play a game, it would take its time to load, again with the
>>>>> disfigured text. When the game would load, it would usually play for
>>>>> about a minute and then freeze. Then id have to restart my computer.
>>>>> this happened every time i played it, and my computer had more then
>>>>> the minimum hardware requirements to play the game. I then downloaded
>>>>> Return to castle wolfenstein, and when attempting to play the
>>>>> multiplayer game, the computer would freeze, and the screen would go
>>>>> black because there is no signal. While this was happening the
>>>>> background music would continue to play for about 30 seconds more,
>>>>> then id have to restart it. Then i tried with Star Wars knights if
>>>>> the
>>>>> old republic, and this time there was no disfigured text, but all but
>>>>> the quit option on the menu would appear. when i tried to play the
>>>>> game, it would play for a while, and then go into the same state,
>>>>> with
>>>>> the monitor going black because of the graphic card. My mother board
>>>>> is not more then 4 months old, and my graphic card is even newer. I
>>>>> tried downloading the new driver, but it wont install due to an NSIS
>>>>> error. Can anybody help please?
>>>> Have you checked the temperature of the card when you are having
>>>> problems? The fan, if any, may have failed or you might not have
>>>> adequate air circulation around the card and it is getting too hot. If
>>>> you feel the card and it is too hot to touch it is overheated.
>>>> If the card is not overheating you might want to use a program like
>>>> Speedfan to monitor the voltages to see if one of them is out of
>>>> tolerance while you are running the games.- Hide quoted text -
>>>> - Show quoted text -
>>> Thank you for replying, i felt the graphic card, and it doesnt seem to
>>> be overheating. i did just downloaded Speedfan, and it five different
>>> reading. One of them is the processor which seems to vary from a arrow
>>> pointing in both directions, to the check mark. There are three with
>>> the down arrow (dont know what that means), and one with a fire sign
>>> lol, and is given the name Temp 3. How can i identify what hardware
>>> component the software is monitoring?
>> Temperature 1 is normally the CPU, 2 is the motherboard, and 3 is often
>> not available which is why it is reading as high. You can configure the
>> reported temperatures in the Configure option. Just uncheck 3.
>> You might also look at the voltages and make sure that they are within
>> specs and don't change when running games.- Hide quoted text -
>>
>> - Show quoted text -
>
> how do i tell what voltage to use if its not mentioned in the manual?
>
I would note what the voltages are under "normal" conditions and then
check them when you are stressing the computer. If there is a
noticeable shift you might be having a power problem. >> Stay informed about: Graphic's card problem |
|
| Back to top |
|
 |  |
|