"Bill Eversole" <beversol DeleteThis @hotmail.com> wrote in message
news:1141595735.053333.185160@t39g2000cwt.googlegroups.com...
> Hi,
>
> I am working on a client's PC. He recently replaced his motherboard
> and PSU. He couldn't get it to power on, so he brought it to me. I've
> fixed that problem. The only problem I have left is to get the HD LED
> lights to work properly on the front panel.
>
> The case is an ANTEC TX1050B. It has four LED lights on the front
> panel. The top one is a green power light--it works. The next one is
> an amber one (looks like a HD symbol next to it to me) It doesn't
> light up at all. Below that are two light green LEDs labeled I and II
> (they both glow steady when system is powered on. They don't flicker
> with HD activity. When I reverse the polarity of these two leads on
> the Front Panel connectors the two LEDs don't light at all. There is
> one lead left I have not connected. It is labeled Reset LED. I have
> no idea what it is for.
>
> The motherboard is an AOpen AX4SG-UN.
>
> Any ideas how to get the LEDs to work properly. Thanks.
>
> Bill
>
RTFM and locate the HD led connector. If there is a connector fitted,
remove and rotate 180deg. If no connection, find the lead from the HD led
and connect it.
Mike.
FAQ
Profile
Private Messages
Log in
