 |
|
 |
|
Next: HDD Detection time
|
| Author |
Message |
External

Since: Feb 15, 2005 Posts: 10
|
(Msg. 1) Posted: Mon Feb 14, 2005 11:35 pm
Post subject: HDD Detection time Archived from groups: alt>comp>periphs>mainboard>tyan (more info?)
|
|
|
|
|
| Back to top |
|
 |  |
| Related Topics: | S2875 w/ broken Gigabit detection - Hi all, after I got my mainboard back, one problem still persists. Even though the mainboard does have a Gigabit port in the backplane, the Intel chip on board and the jumper 26 open, the BIOS and FreeBSD can't detect the presence of the Ethernet chip...
S2720 vs. S2721 on PCI64 device detection - I have a Xilinx FPGA device that is auto detected at 66MHz PCI on the S2721-533 (bios 2.01) and auto detected at 33MHz on the S2720 (bios 1.03). The 66MHz is correct. It doesn't matter what I set the bus speed to in the BIOS -- in other words, I can't..
Tyan Thunder K8W S2885 - Can't get Highpoint BIOS and SI S.. - Might be a stupid question, but... Mainboard is a K8W S2885 that has a Silicon Image 3114 chip onboard. I have added a Highpoint 1820A SATA RAID controller card into one of the PCI-X slots. When I have the CMOS settings configured to scan "Last to...
0251 - CMOS Checksum Bad. Every time I boot my K8WE dual O.. - I have a new dual opteron system based on a Tyan K8WE (S2895) motherboard. Every time its powered on I get the error "0251 - CMOS Checksum Bad. Default Configuration Loaded". I've reset the bios, reflashed the firmware, reseated everything, cha...
Wanted: Tyan S1836 Thunder 100 Beta BIOS - I am looking for the unreleased beta BIOS for the Tyan S1836DLUAN Thunder 100. This BIOS version reportedly fixed problems with ACPI in Windows 2000 and provided unofficial support for the Slot 1 Pentium III Coppermine CPUs. The original filename as it... |
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|
 |
|
|