Help with integrated SATA drivers - KT600 plus

"Tjarboe" <grayrock.DeleteThis@NSccrtc.com> wrote in message news:<109ariu9smm7ud9.DeleteThis@corp.supernews.com>...

No, When using the SATA drive as the boot drive for WinXP you must
have a floppy drive in order to install the driver for the SATA
controller. If you were using a IDE hard drive for the boot drive and
adding the SATA drive as a second drive it would be possible to add
the driver after XP was installed. But you will need a floppy drive to
do as you wish to do.

 > I have the KT600 dragon Plus Motherboard and purchased a Maxtor 160GB SATA
 > drive. I would like to install Windows XP Pro onto the SATA drive, but I do
 > not have a floppy drive to put the drivers on for the F6 command durring
 > setup. Is there anyway to get Windows XP to look on the SOYO CD for the
 > drivers durring install or integrate the drivers into Setup by building a
 > new Windows XP Pro CD? If so, could someone please give me detailed
 > instructions on how to do so?
 > Thanks.
 > Thomas Jarboe<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Help with integrated SATA drivers - KT600 plus