Welcome to HardwareForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

Is Intel Graphics Controller support dual monitor?

  
   Hardware Problem Solving Community! (Home) -> FIC RSS
Related Topics:
ATA IDE controller card & PA-2013 - Just fitted an Ultra ATA/100 to the PA-2013 and find it and a Maxtor 80Gig works fine, but as my original HD is still fitted at the moment (a 6.4Gig) which will be to a Cyrix powered PC. What is a good HD utility prior..

SB & MKEPanasonic controller & CR-563 - Have just full lenght ISA card but it did not seem to work with the Sony CD-ROM CDU5211, the soundcard with the and using the original Matshita CD-ROM CR-563 appears to work OK, but the original cable connects with red (pin 1) ..

PA-2013 MB & Promise Ultra 100/133 controller cards - Does the FIC 2013 MB support the newer Promise Ultra 100 ATA card? How about the 133? Please advise. Thanks, Gibby

What graphics can I put on a PA-2013 - I posted the following on a video group. Someone suggested I post it on here incase someone can advise me on the of my ....... I have an old PC which my son would like to use for games, but the video isn't up to it. How can I..

Other forums for FIC mainboard support? - Doesn't seem to be much posting going on here. I've seen very little ever posted about the model mainboard I have. (Might be a sign of how bad it suks) Is there another forum that might have more FIC mainboard users?
Next:  FIC: PCI modem in VA-503+ dosn't hear dial tone. Suggestions?  
Author Message
Thaqalain

External


Since: Aug 19, 2005
Posts: 3



(Msg. 1) Posted: Fri Aug 19, 2005 8:29 pm
Post subject: Is Intel Graphics Controller support dual monitor?
Archived from groups: alt>comp>periphs>mainboard>fic (more info?)
In my favorite computer,I have Intel(R)82845G/GL Graphics
Controller,Video BIOS Version 2759,will it support dual monitor?
Do both individual VGAs have to support dual monitor?
----
INTEL(R) GRAPHICS REPORT


Report Date: 08,08,2005
Report Time[hr:mm:ss]: 21:59:50
Driver Version: 6.13.01.3119
Operating System: Windows NT* 5.1.2600 Service Pack 2
Default Language: English
DirectX* Version: 8.1
Physical Memory: 125 MB
Processor: x86
Processor Speed: 1800 MHZ
Vendor ID: 0x8086
Device ID: 0x2562
Device Revision: 1


* Output Devices Connected to Graphics Accelerator *


Active Monitors:1


I have inserted REALITY 334 SGARAM 4MB PCI (S3 ViRGE GX2) into another
slot(#2),but its not working either in safe mode or by disabling
original Intel Graphics Controller.Windows failed to installed it's
drive by any means.Only monitor attached to Intel GC is working.How can



I activate other card,to show both monitors working same time.

 >> Stay informed about: Is Intel Graphics Controller support dual monitor? 
Back to top
Login to vote
Thaqalain

External


Since: Aug 19, 2005
Posts: 3



(Msg. 2) Posted: Mon Sep 05, 2005 9:18 am
Post subject: Re: Is Intel Graphics Controller support dual monitor? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
How can I go into my motherboard's BIOS and will there be chance to
restore to original settings if it failed to support dual monitor?

 >> Stay informed about: Is Intel Graphics Controller support dual monitor? 
Back to top
Login to vote
Alex Zorrilla

External


Since: May 14, 2004
Posts: 181



(Msg. 3) Posted: Tue Sep 06, 2005 12:28 pm
Post subject: Re: Is Intel Graphics Controller support dual monitor? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
To go into the BIOS, there is usually some key you have to hit an the
initial bootup screen, before it starts loading Windows. Usually, it is
something like F1, F2, F10, or Del. It depends on the computer. If you
see a message that says "Press <something> to enter SETUP", that is what
you are looking for.

Once you are in there, you usually navigate with the arrow keys and make
changes with the PageUp/PageDown keys, or hitting ENTER and then
changing the value. It varies, but the directions are usually on the
screen.

If your setup fails to support dual monitors (with this particular
configuration), it is simple enough to recover. Just pull the PCI
graphics card out. The setting I am talking about is just the order to
initialize graphics cards (onboard first, then PCI...? PCI first, then
onboard...?). If you tell it to search for the PCI graphics card first,
but it is not installed, then it will just move on to the onboard
graphics. No harm done.




Thaqalain wrote:
> How can I go into my motherboard's BIOS and will there be chance to
> restore to original settings if it failed to support dual monitor?
>
 >> Stay informed about: Is Intel Graphics Controller support dual monitor? 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> FIC All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]