 |
|
|
|
Next: [va-503+] what "irq steering tab" ?
|
| Author |
Message |
External
Since: Jul 05, 2004
Posts: 1
|
(Msg. 1) Posted: Mon Jul 05, 2004 12:16 pm
Post subject: K6-2 500 on a VA-503+ Rev. 1.1A?
Archived from groups: alt>comp>periphs>mainboard>fic (more info?)
|
|
|
I've checked around using Google and can't quite get a straight answer
on this one...
I picked up a VA-503+ motherboard with the rev "1.1a" stamp on it. My
question is, will the K6-2 500 processor run on it, or only on the Rev.
1.2 boards??
Right now it's got a K6-2 300 CPU on board, and I've OC'd it to 350MHZ,
but ...I'd like to get even faster, for as little as I can. I see that
regular K6-2 500 processors are selling for dirt cheap right now, and
it sounds perfect, but I've heard from a few sites that the 1.1a rev.
board won't go above 400MHz. Does anyone here know for a fact that
this is the case? Runs too hot...or is it too unstable?? Or is it
just mis-information???
For what it's worth, I'm not interested in the "+" CPU's...hard to get
brand new, and they're selling for quite a bit on eBay, so...just
interested in the plain vanilla 500 K6-2.
And...if it won't work on the 1.1a board, can it be tweaked by doing
some solder work on the board to match up to the 1.2a rev board? Any
current working links detailing how to do this??
Many thanks in advance!!! |
|
| Back to top |
|
 | |
External
Since: Mar 09, 2004
Posts: 20
|
(Msg. 2) Posted: Tue Jul 06, 2004 1:01 pm
Post subject: Re: K6-2 500 on a VA-503+ Rev. 1.1A? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Sep 25, 2003
Posts: 81
|
(Msg. 3) Posted: Wed Jul 07, 2004 3:53 am
Post subject: Re: K6-2 500 on a VA-503+ Rev. 1.1A? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
If you are interested I have the text and images of the mods that can be
made on an older 503+ (the article doesn't actually say v1.1a but it would
apply) to increase or simply bypass the current limiter which is the
limitation preventing some boards from working with some K6-2 500 CPUs.
Reply to my email address (remove the nospam) and I'll send them to you.
You might get lucky (or do some research and look for the right model) and
get a low current version of the CPU, and not need the mod anyway.
Robert
"bargainbin" <bargainbin.RemoveThis@anonymous.to> wrote in message
news:2004070509165416807%bargainbin@anonymousto...
> I've checked around using Google and can't quite get a straight answer
> on this one...
>
> I picked up a VA-503+ motherboard with the rev "1.1a" stamp on it. My
> question is, will the K6-2 500 processor run on it, or only on the Rev.
> 1.2 boards??
>
> Right now it's got a K6-2 300 CPU on board, and I've OC'd it to 350MHZ,
> but ...I'd like to get even faster, for as little as I can. I see that
> regular K6-2 500 processors are selling for dirt cheap right now, and
> it sounds perfect, but I've heard from a few sites that the 1.1a rev.
> board won't go above 400MHz. Does anyone here know for a fact that
> this is the case? Runs too hot...or is it too unstable?? Or is it
> just mis-information???
>
> For what it's worth, I'm not interested in the "+" CPU's...hard to get
> brand new, and they're selling for quite a bit on eBay, so...just
> interested in the plain vanilla 500 K6-2.
>
> And...if it won't work on the 1.1a board, can it be tweaked by doing
> some solder work on the board to match up to the 1.2a rev board? Any
> current working links detailing how to do this??
>
> Many thanks in advance!!!
><!-- ~MESSAGE_AFTER~ --> >> Stay informed about: K6-2 500 on a VA-503+ Rev. 1.1A? |
|
| Back to top |
|
| |
External
Since: Mar 09, 2004
Posts: 20
|
(Msg. 4) Posted: Wed Jul 07, 2004 3:53 am
Post subject: Re: K6-2 500 on a VA-503+ Rev. 1.1A? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I guess I got lucky. A little checking on what Robert said shows that the
maximum current specification for a K6-2 500 is12.5 amps and it appears that
the current limiter on the 1.1a rev 503+ has a manufacturing range from 12
to 16 amps.
"Robert Akins" <robert.akins2.RemoveThis@verizon.net> wrote in message
news:RPHGc.25511$6e7.7637@nwrddc03.gnilink.net...
> If you are interested I have the text and images of the mods that can be
> made on an older 503+ (the article doesn't actually say v1.1a but it would
> apply) to increase or simply bypass the current limiter which is the
> limitation preventing some boards from working with some K6-2 500 CPUs.
> Reply to my email address (remove the nospam) and I'll send them to you.
> You might get lucky (or do some research and look for the right model) and
> get a low current version of the CPU, and not need the mod anyway.
> Robert
> "bargainbin" <bargainbin.RemoveThis@anonymous.to> wrote in message
> news:2004070509165416807%bargainbin@anonymousto...
> > I've checked around using Google and can't quite get a straight answer
> > on this one...
> >
> > I picked up a VA-503+ motherboard with the rev "1.1a" stamp on it. My
> > question is, will the K6-2 500 processor run on it, or only on the Rev.
> > 1.2 boards??
> >
> > Right now it's got a K6-2 300 CPU on board, and I've OC'd it to 350MHZ,
> > but ...I'd like to get even faster, for as little as I can. I see that
> > regular K6-2 500 processors are selling for dirt cheap right now, and
> > it sounds perfect, but I've heard from a few sites that the 1.1a rev.
> > board won't go above 400MHz. Does anyone here know for a fact that
> > this is the case? Runs too hot...or is it too unstable?? Or is it
> > just mis-information???
> >
> > For what it's worth, I'm not interested in the "+" CPU's...hard to get
> > brand new, and they're selling for quite a bit on eBay, so...just
> > interested in the plain vanilla 500 K6-2.
> >
> > And...if it won't work on the 1.1a board, can it be tweaked by doing
> > some solder work on the board to match up to the 1.2a rev board? Any
> > current working links detailing how to do this??
> >
> > Many thanks in advance!!!
> >
>
><!-- ~MESSAGE_AFTER~ --> >> Stay informed about: K6-2 500 on a VA-503+ Rev. 1.1A? |
|
| Back to top |
|
| |
External
Since: Sep 25, 2003
Posts: 81
|
(Msg. 5) Posted: Sat Jul 10, 2004 8:21 am
Post subject: Re: K6-2 500 on a VA-503+ Rev. 1.1A? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Hope it works out for you.
Robert (Akins) 
"Robert" <notmy.DeleteThis@email.address> wrote in message
news:_qidnZukrsD093bdRVn-hQ@comcast.com...
> I guess I got lucky. A little checking on what Robert said shows that the
> maximum current specification for a K6-2 500 is12.5 amps and it appears
that
> the current limiter on the 1.1a rev 503+ has a manufacturing range from 12
> to 16 amps.
>
> "Robert Akins" <robert.akins2.DeleteThis@verizon.net> wrote in message
> news:RPHGc.25511$6e7.7637@nwrddc03.gnilink.net...
> > If you are interested I have the text and images of the mods that can be
> > made on an older 503+ (the article doesn't actually say v1.1a but it
would
> > apply) to increase or simply bypass the current limiter which is the
> > limitation preventing some boards from working with some K6-2 500 CPUs.
> > Reply to my email address (remove the nospam) and I'll send them to you.
> > You might get lucky (or do some research and look for the right model)
and
> > get a low current version of the CPU, and not need the mod anyway.
> > Robert
> > "bargainbin" <bargainbin.DeleteThis@anonymous.to> wrote in message
> > news:2004070509165416807%bargainbin@anonymousto...
> > > I've checked around using Google and can't quite get a straight answer
> > > on this one...
> > >
> > > I picked up a VA-503+ motherboard with the rev "1.1a" stamp on it. My
> > > question is, will the K6-2 500 processor run on it, or only on the
Rev.
> > > 1.2 boards??
> > >
> > > Right now it's got a K6-2 300 CPU on board, and I've OC'd it to
350MHZ,
> > > but ...I'd like to get even faster, for as little as I can. I see
that
> > > regular K6-2 500 processors are selling for dirt cheap right now, and
> > > it sounds perfect, but I've heard from a few sites that the 1.1a rev.
> > > board won't go above 400MHz. Does anyone here know for a fact that
> > > this is the case? Runs too hot...or is it too unstable?? Or is it
> > > just mis-information???
> > >
> > > For what it's worth, I'm not interested in the "+" CPU's...hard to get
> > > brand new, and they're selling for quite a bit on eBay, so...just
> > > interested in the plain vanilla 500 K6-2.
> > >
> > > And...if it won't work on the 1.1a board, can it be tweaked by doing
> > > some solder work on the board to match up to the 1.2a rev board? Any
> > > current working links detailing how to do this??
> > >
> > > Many thanks in advance!!!
> > >
> >
> >
>
><!-- ~MESSAGE_AFTER~ --> >> Stay informed about: K6-2 500 on a VA-503+ Rev. 1.1A? |
|
| Back to top |
|
| |
External
Since: Aug 01, 2004
Posts: 10
|
(Msg. 6) Posted: Sun Jul 11, 2004 12:24 am
Post subject: Re: K6-2 500 on a VA-503+ Rev. 1.1A? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
`HI, if I remember you can check the mod level, there was a small white
label on the rear center of board, any number over 4502 is ok with K6-2/500.
doug
<a style='text-decoration: underline;' href="http://www.lynncomp.com" target="_blank">www.lynncomp.com</a>
"bargainbin" <bargainbin.RemoveThis@anonymous.to> wrote in message
news:2004070509165416807%bargainbin@anonymousto...
> I've checked around using Google and can't quite get a straight answer on
> this one...
>
> I picked up a VA-503+ motherboard with the rev "1.1a" stamp on it. My
> question is, will the K6-2 500 processor run on it, or only on the Rev.
> 1.2 boards??
>
> Right now it's got a K6-2 300 CPU on board, and I've OC'd it to 350MHZ,
> but ...I'd like to get even faster, for as little as I can. I see that
> regular K6-2 500 processors are selling for dirt cheap right now, and it
> sounds perfect, but I've heard from a few sites that the 1.1a rev. board
> won't go above 400MHz. Does anyone here know for a fact that this is the
> case? Runs too hot...or is it too unstable?? Or is it just
> mis-information???
>
> For what it's worth, I'm not interested in the "+" CPU's...hard to get
> brand new, and they're selling for quite a bit on eBay, so...just
> interested in the plain vanilla 500 K6-2.
>
> And...if it won't work on the 1.1a board, can it be tweaked by doing some
> solder work on the board to match up to the 1.2a rev board? Any current
> working links detailing how to do this??
>
> Many thanks in advance!!!
><!-- ~MESSAGE_AFTER~ --> >> Stay informed about: K6-2 500 on a VA-503+ Rev. 1.1A? |
|
| Back to top |
|
| |
External
Since: Jul 10, 2004
Posts: 31
|
(Msg. 7) Posted: Sun Jul 11, 2004 7:29 am
Post subject: Re: K6-2 500 on a VA-503+ Rev. 1.1A? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Sat, 10 Jul 2004 21:24:04 -0400, "Doug Lynn" <drlynn RemoveThis @bellsouth.net>
wrote:
>>`HI, if I remember you can check the mod level, there was a small white
>>label on the rear center of board, any number over 4502 is ok with K6-2/500.
any number 4502 and over is more accurate 
I have a 4502 board in my Linux server with a K6-2/500.<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: K6-2 500 on a VA-503+ Rev. 1.1A? |
|
| Back to top |
|
| |
External
Since: Mar 09, 2004
Posts: 20
|
(Msg. 8) Posted: Sun Jul 11, 2004 7:29 am
Post subject: Re: K6-2 500 on a VA-503+ Rev. 1.1A? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
The ECN number on my 1.1a board which is also running a K6-2 500 is 1000. I
think the ECN is only important if you want a 1.2a board that is certified
to run a CPU higher than 400 MHz. If the original poster is still around I
suggest he take a look at this info:
<a style='text-decoration: underline;' href="http://web.archive.org/web/20001208161600/http://surfree.homestead.com/rock535/files/fic/K63_mod.htm" target="_blank">http://web.archive.org/web/20001208161600/http://surfree.homestead.com...ck535/f</a>
<a style='text-decoration: underline;' href="http://web.archive.org/web/20001208155100/surfree.homestead.com/rock535/files/fic/K62_info.htm" target="_blank">http://web.archive.org/web/20001208155100/surfree.homestead.com/rock53...iles/fi</a>
"Brad Clarke" <me.DeleteThis@privacy.net> wrote in message
news:7gg1f0pov8dmaruckqq0fnoo2mebbltngq@4ax.com...
> On Sat, 10 Jul 2004 21:24:04 -0400, "Doug Lynn" <drlynn.DeleteThis@bellsouth.net>
> wrote:
>
> >>`HI, if I remember you can check the mod level, there was a small white
> >>label on the rear center of board, any number over 4502 is ok with
K6-2/500.
> any number 4502 and over is more accurate
>
> I have a 4502 board in my Linux server with a K6-2/500.<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: K6-2 500 on a VA-503+ Rev. 1.1A? |
|
| Back to top |
|
| |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Search
Profile
Private Messages
Log in
