K7N2 Delta L sound question

I know that you can't have Dolby Digital or EAX with this board, but
how do you set up for 6 channel sound? After all, the ALC650 is
capable of 6 channels, and the manual has 6 channel capability listed
(separately from the MCPT-2 stuff), yet I cannot seem to get 6 (or
even 4) channel output. I have checked the appropriate boxes in the
advanced volume control section to get the outputs going through the
input channels on the motherboard but I still don't get anything more
than the front two channels. I've also played around with the amount
of speakers in the multimedia icon in the setup folder. Am I missing
something here?

Maybe while the ALC650 is capable of 6 channels, the "out-thru-the-in"
feature is still only reserved for MCPT-2 (If that were the case,
though, why the heck does it show up inmy volume control then?).
Maybe I have to have the extra bracket for the extra channels?

If you could shed some light on this subject, I'd surely appreciate
it.

--
Bill
(Please remove "no-spam" from address when replying)

Update:

There are indeed instructions within the manual that show you how to
set up for more than 2 speakers. I tried it but it still deosn't
work. I know that my speakers are actually working because I tested
all of them individually.

On Mon, 10 Nov 2003 04:18:20 UTC, "Bill Ko"
<billko DeleteThis @no-spam.comcast.net> wrote:

 > I know that you can't have Dolby Digital or EAX with this board, but
 > how do you set up for 6 channel sound? After all, the ALC650 is
 > capable of 6 channels, and the manual has 6 channel capability listed
 > (separately from the MCPT-2 stuff), yet I cannot seem to get 6 (or
 > even 4) channel output. I have checked the appropriate boxes in the
 > advanced volume control section to get the outputs going through the
 > input channels on the motherboard but I still don't get anything more
 > than the front two channels. I've also played around with the amount
 > of speakers in the multimedia icon in the setup folder. Am I missing
 > something here?
 >
 > Maybe while the ALC650 is capable of 6 channels, the "out-thru-the-in"
 > feature is still only reserved for MCPT-2 (If that were the case,
 > though, why the heck does it show up inmy volume control then?).
 > Maybe I have to have the extra bracket for the extra channels?
 >
 > If you could shed some light on this subject, I'd surely appreciate
 > it.
 >


--
Bill
(Please remove "no-spam" from address when replying)<!-- ~MESSAGE_AFTER~ -->