KW7 Abit Mother Board detects the CPU incorrectly

I recently upgraded from a gigabyte motherboard to the KW7. The reason
for the upgrade was to be able to fully support my PC3200 at 200 Mhz.
(The gigabyte would only allow me to run the memory stable at 166Mhz,
anything above would cause the system to hang and go unstable).
My processor is a AMD Athlon(tm) XP 3200+. However when I boot the
BIOS indicates that I have an AMD Athlon(tm) XP 1900 +. I have been
unable to resolve this, I made sure I had the most up to date bios from
ABIT.

When I had the Gigabyte Motherboard installed here ithe Rightmark
information

Vendor String: AuthenticAMD
Model Name: AMD Athlon(TM) XP
Core Name: Barton
Core Revision: A2
Brand String: AMD Athlon(tm) XP 3200+
Brand ID: 0
Family (ext): 6 (7)
Model (ext): 10 (10)
Stepping (ext): 0 (0)
Features: MMX(ext), 3DNow!(ext), SSE
Logical processors: N/A
APIC ID: N/A
Core Speed: 2209.95 MHz
Bus Speed: 200.90 MHz
Multiplier: 11.0x
L1 Data Cache: 64 KB, 2-way associative, 64 bytes/line
L1 Instructions Cache: 64 KB, 2-way associative, 64 bytes/line
L2 Cache: 512 KB, 16-way associative, 64 bytes/line
L3 Cache: N/A
L1 Data TLB: 32 entries, Full associative
L1 Data TLB (Large Pages): 4 entries, 4-way associative
L1 Instructions TLB: 16 entries, Full associative
L1 Instructions TLB (Large Pages): 4 entries, Full associative
L2 Data TLB: 256 entries, 4-way associative
L2 Data TLB (Large Pages): N/A
L2 Instructions TLB: 256 entries, 4-way associative
L2 Instructions TLB (Large Pages): N/A


The following is the RIGHTMARK information after installing the ABIT
KW7 Motherboard
Vendor String: AuthenticAMD
Model Name: AMD Athlon(TM) XP
Core Name: Barton
Core Revision: A2
Brand String: AMD Athlon(tm) XP 1900+
Brand ID: 0
Family (ext): 6 (7)
Model (ext): 10 (10)
Stepping (ext): 0 (0)
Features: MMX(ext), 3DNow!(ext), SSE
Logical processors: N/A
APIC ID: N/A
Core Speed: 1462.50 MHz
Bus Speed: 132.95 MHz
Multiplier: 11.0x
L1 Data Cache: 64 KB, 2-way associative, 64 bytes/line
L1 Instructions Cache: 64 KB, 2-way associative, 64 bytes/line
L2 Cache: 512 KB, 16-way associative, 64 bytes/line
L3 Cache: N/A
L1 Data TLB: 32 entries, Full associative
L1 Data TLB (Large Pages): 4 entries, 4-way associative
L1 Instructions TLB: 16 entries, Full associative
L1 Instructions TLB (Large Pages): 4 entries, Full associative
L2 Data TLB: 256 entries, 4-way associative
L2 Data TLB (Large Pages): N/A
L2 Instructions TLB: 256 entries, 4-way associative
L2 Instructions TLB (Large Pages): N/A

Any help would be fantastic, the only options for manually setting the
FSB in bios is from 133-165.

Thanks