You guys were right. I guess I was just hoping against hope that it was
something simple. Swapped m'boards and all is well (other than the tedious
task of updating the OS after the repair install.)
"Lee M." <lmacmil RemoveThis @forget_it.com> wrote in message
news:M8mdnQ4i3cTA0FnanZ2dnUVZ_oytnZ2d@comcast.com...
> Recently the 2nd computer started to need 2 or 3 tries to boot. The
> keyboad
> lights blink continuously and the screen says "no video signal."
> Sometimes
> killing the power and retrying gets it going on the 2nd or 3rd try to
> today
> no go.
>
> Tried a different video card and didn't get the "no video signal"
> message (in fact got no video at all) but the keyboard lights were
> blinking.
> Once it boots, it runs fine. I know the caps are bulging and one of the
> voltages fluctuates. Could it be that the m'board has finally given up
> the
> ghost?
>
> One other thing, even though there's no video, the hard disk light is
> blinking like there's something going on and the m'board LED reads FF.
>
> Thanks.
>
> >> Stay informed about: Keyboard lights blink, no video