L7S7A2 win xp problem......

External Since: Jul 06, 2003 Posts: 2

Three days ago i wrote this message:
>My configuration is :
>ECS L7S7A2
>AMD 2000+
>256 MB DDR PC2700
>CREATIVE GeForce4 Ti4600 128 Mega
>HD 80 giga SEAGATE

>When i try to install win xp with optimal configuration the sistem
>hang on the first install chnage screen (when the installation
request
>if you want to install a new xp installation or replace an exists)
>If I remove the 2 level chace in the bios , the system arrive at the
>34 minutes screen but when i set the keyboard and the international
>setting the system hang with a variety of error , such as 0x7a
>kernel_data_inpage_error, bad_pool_request

>Why ? I have install the last bios update , if anyone have the some
>problem please give me a trick to resolve it. The MS resource Kit
>can't help me anymore...

First of all , thanks for everyone have response to my old msg , i
made memory test on my board , i check my hd drive and all device are
good.

I think the system is instable , because if i decrease the velocy to
100/100 mhz the system hang on 34 minutes xp installation .

Anyone have a trick to ask to me for resolve my problem.....

Can anyone tell my the right and secure configuration for run my pc
without hang installation... Please Help me.....

External Since: Jul 24, 2003 Posts: 7

"Giuseppe" <regina_giuseppe RemoveThis @hotmail.com> schreef in bericht
news:b065c3ce.0307072334.2f930507@posting.google.com...
> Three days ago i wrote this message:
  > >My configuration is :
  > >ECS L7S7A2
  > >AMD 2000+
  > >256 MB DDR PC2700
  > >CREATIVE GeForce4 Ti4600 128 Mega
  > >HD 80 giga SEAGATE
>
  > >When i try to install win xp with optimal configuration the sistem
  > >hang on the first install chnage screen (when the installation
> request
  > >if you want to install a new xp installation or replace an exists)
  > >If I remove the 2 level chace in the bios , the system arrive at the
  > >34 minutes screen but when i set the keyboard and the international
  > >setting the system hang with a variety of error , such as 0x7a
  > >kernel_data_inpage_error, bad_pool_request
>
>
*I had thesame error on a MSI 745 during installation of XP, according to
microsoft that error is caused by bad ram or a bad memoryslot, i knew the
memorystick i used was ok,,so i put it in another memoryslot,,and
poof,,everything went fine from then,,sure worth a try.
good luck

Sus