L7VTA Ver. 1.0

FAQ

Profile

L7VTA Ver. 1.0

Hardware Problem Solving Community! (Home) -> Elitegroup

Next: N2U400-A Memory timings

Author

Message

Helmut Haeussler

External

Since: May 04, 2004
Posts: 1

(Msg. 1) Posted: Tue May 04, 2004 3:56 am Post subject: L7VTA Ver. 1.0 Archived from groups: alt>comp>periphs>mainboard>elitegroup (more info?)

Hi, I tried to upgrade my system with Amd 2800k+ but it runs only on default. (cpu clock 133, dimm clock 133) I have memory from Elixir 512 Mb PC 3200 (400 Mhz). If I try FSB 165 and dimm clock 166 I get no screen (black). I must do the reset jumper for default values. My OP is Win XP Home and my Bios: Award Ver. 6.00 PG 02/18/2003. I have now 1666 MHz and the cpu is shown by AIDA as Athlon 2200+. The system is stable but I think it can run faster. What must I do? cu Helmut >> Stay informed about: L7VTA Ver. 1.0

Display posts from previous:

Related Topics:

L7VTA Rev. 1.0 - L7VTA Rev. 1.0 Fault press the start button and the fans run for a few seconds then stop press the start button again and nothing happens switch off the power at the mains for a few seconds switch back on press start button and the fans run for a few....

Problem with L7VTA and XP 2500 - When I try to run the board with a XP 2500 with 166Mhz FSB clock it does not work. It stops when it tries to write to the BIOS RAM. It works with 133Mhz. I have 333 DDR RAM installed Any ideas?

ECS L7VTA-L Multiplier Adjustment???? - Can you adjust multiplier on the board??? Just wondering before I buy one!! TIA

RAID on L7VTA as normal IDE - I want to set up 2 HDD's 1 DVD, 1 CD-RW and 1 ZIP-100 on my system with my new L7VTA. On my ASUS A7V133 I had the two HDD and the ZIP connected to the on Board promise 20265 and the DVD and CDRW to the normal IDE. How can I do this on the LVTA?..

L7VTA 1.0 - Memory problems? - A strange problem has appeared on my machine this evening and it's bugging me. Setup is: L7VTA V1.0 AMD Athlon 2400 (1.99ghz) 2x256 PC2700 DDR RAM When I now power on or reset the machine, it goes into the usual start sequence of: Diplays video card....

	Hardware Problem Solving Community! (Home) -> Elitegroup	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum